Supertex inc. TN0702 N-Channel Enhancement-Mode Vertical DMOS FET Features ►► ►► ►► ►► ►► ►► ►► Low threshold - 1.6V max. High input impedance Low input capacitance - 130pF typical Fast switching speeds Low on-resistance guaranteed at VGS = 2, 3, and 5V Free from secondary breakdown Low input and output leakage Applications ►► ►► ►► ►► ►► ►► ►► Logic level interfaces – ideal for TTL and CMOS Solid state relays Battery operated systems Photo voltaic drives Analog switches General purpose line drivers Telecom switches Ordering Information Part Number TN0702N3-G This low threshold, enhancement-mode (normally-off) transistor utilizes a vertical DMOS structure and Supertex’s well-proven, silicon-gate manufacturing process. This combination produces a device with the power handling capabilities of bipolar transistors and the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, this device is free from thermal runaway and thermally-induced secondary breakdown. Supertex’s vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where very low threshold voltage, high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. Product Summary Package Option Packing TO-92 1000/Bag TO-92 2000/Reel TN0702N3-G P002 TN0702N3-G P003 TN0702N3-G P005 General Description BVDSS/BVDGS RDS(ON) ID(ON) (max) (min) 1.3Ω 0.5A 20V VGS(th) (max) 1.0V Pin Configuration TN0702N3-G P013 TN0702N3-G P014 -G denotes a lead (Pb)-free / RoHS compliant package. Contact factory for Wafer / Die availablity. Devices in Wafer / Die form are lead (Pb)-free / RoHS compliant. DRAIN SOURCE Absolute Maximum Ratings Parameter Value Drain-to-source voltage BVDSS Drain-to-gate voltage BVDGS Gate-to-source voltage ±20V Operating and storage temperature -55OC to +150OC Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Continuous operation of the device at the absolute rating level may affect device reliability. All voltages are referenced to device ground. Typical Thermal Resistance Package θja TO-92 132OC/W Doc.# DSFP-TN0702 C080813 GATE TO-92 Product Marking SiTN 0 7 0 2 YYWW YY = Year Sealed WW = Week Sealed = “Green” Packaging Package may or may not include the following marks: Si or TO-92 Supertex inc. www.supertex.com TN0702 Thermal Characteristics ID Package TO-92 (continuous)† ID Power Dissipation (pulsed) @TC = 25OC 530mA 1.0A 1.0W IDR† IDRM 530mA 1.0A Notes: † ID (continuous) is limited by max rated Tj . Electrical Characteristics (T A Sym Parameter BVDSS VGS(th) ΔVGS(th) IGSS = 25OC unless otherwise specified) Min Typ Max Units Drain-to-source breakdown voltage 20 - - V VGS = 0V, ID = 1.0mA Gate threshold voltage 0.5 0.8 1.0 V VGS = VDS, ID= 1.0mA Change in VGS(th) with temperature - - -4.0 Gate body leakage - - 100 nA VGS = ± 20V, VDS = 0V - - 100 nA VGS = 0V, VDS = Max Rating - - 100 µA VDS = 0.8 Max Rating, VGS = 0V, TA = 125°C 0.5 1.0 - A VGS = VDS = 5.0V - 4.0 5.0 - 1.9 2.5 - 1.0 1.3 - - 0.75 100 500 - IDSS Zero gate voltage drain current ID(ON) On-state drain current RDS(ON) ΔRDS(ON) Static drain-to-source on-state resistance Change in RDS(ON) with temperature Ω CISS Input capacitance - 130 200 COSS Common source output capacitance - 70 125 CRSS Reverse transfer capacitance - 30 60 td(ON) Turn-on delay time - - 20 Rise time - - 20 Turn-off delay time - - 30 Fall time - - 20 Diode forward voltage drop - - 1.0 tf VSD VGS = 3.0V, ID = 200mA VGS = 5.0V, ID = 500mA Forward transductance td(OFF) mV/ C VGS = VDS, ID= 1.0mA O VGS = 2.0V, ID = 50mA GFS tr Conditions %/ C O VGS = 5.0V, ID = 500mA mmho VDS = 5.0V, ID = 500mA pF VGS = 0V, VDS = 20V, f = 1.0MHz ns VDD = 20V, ID = 0.5A, RGEN = 25Ω V VGS = 0V, ISD = 0.5A Notes: 1. All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300µs pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. Switching Waveforms and Test Circuit 10V INPUT 0V Pulse Generator 10% t(ON) td(ON) VDD OUTPUT 0V Doc.# DSFP-TN0702 C080813 VDD 90% t(OFF) tr td(OFF) OUTPUT RGEN tf 10% 10% 90% RL INPUT D.U.T. 90% 2 Supertex inc. www.supertex.com TN0702 Typical Performance Curves Output Characteristics 5.0 Saturation Characteristics 5.0 VGS = 8V VGS = 8V 4.0 3.0 ID (amperes) ID (amperes) 4.0 6V 5V 2.0 6V 3.0 5V 2.0 4V 4V 1.0 1.0 3V 0 2V 2V 0 5.0 10 15 0 20 VDS (volts) 2.0 0 2.0 4.0 6.0 8.0 10 VDS (volts) Transconductance vs. Drain Current Power Dissipation vs. Case Temperature 2.0 PD (watts) VDS = 5.0V GFS (siemens) 3V TA = -55OC 1.0 TO-92 1.0 25O 150O 0 0 .05 1.0 1.5 2.0 0 2.5 0 25 50 ID (amperes) Maximum Rated Safe Operating Area 1.0 Thermal Resistance (normalized) ID (amperes) 10 1.0 TO-92 (Pulsed) 0.1 0.01 TC = 25OC 0.1 1.0 10 100 125 150 Thermal Response Characteristics 0.8 0.6 0.4 TO-92 PD = 1.0W TC = 25OC 0.2 0 0.001 100 VDS (volts) Doc.# DSFP-TN0702 C080813 75 TC (OC) 0.01 0.1 1.0 10 tP (seconds) 3 Supertex inc. www.supertex.com TN0702 Typical Performance Curves (cont.) BVDSS Variation with Temperature 1.2 On-Resistance vs. Drain Current 5.0 VGS = 2.0V RDS(ON) (ohms) 1.0 3.0 2.0 VGS = 3.0V 1.0 0.8 -50 0 50 100 0 150 VGS = 5.0V 0 0.5 1.0 2.5 1.6 VDS = 5V 1.4 25OC RDS @ 10V, 0.5A 4.0 TA = -55 C O 3.0 125OC 2.0 1.4 V(th) @ 1.0mA 1.2 VGS(th) (normalized) ID (amperes) 2.0 V(th) and RDS Variation with Temperature Transfer Characteristics 5.0 1.5 ID (amperes) Tj ( C) O 1.2 1.0 1.0 0.8 1.0 RDS(ON) (normalized) BVDSS (normalized) 4.0 0.8 0.6 0 0 2.0 4.0 6.0 8.0 VGS (volts) 10 -50 0 50 100 150 0.6 Tj (OC) Capacitance vs. Drain-to-Source Voltage 10 200 Gate Drive Dynamic Characteristics f = 1.0MHz VDS = 10V 8.0 CISS VGS (volts) C (picofarads) 150 100 200 pF 6.0 VDS = 20V 4.0 COSS 50 2.0 146 pF CRSS 0 0 5.0 10 15 0 20 Doc.# DSFP-TN0702 C080813 0 0.6 1.2 1.8 2.4 3.0 QG (nanocoulombs) VDS (volts) 4 Supertex inc. www.supertex.com TN0702 3-Lead TO-92 Package Outline (N3) D A Seating Plane 1 2 3 L c b e1 e Side View Front View E1 E 1 3 2 Bottom View Symbol Dimensions (inches) A b c D E E1 e e1 L MIN .170 .014† .014† .175 .125 .080 .095 .045 .500 NOM - - - - - - - - - MAX .210 .022† .022† .205 .165 .105 .105 .055 .610* JEDEC Registration TO-92. * This dimension is not specified in the JEDEC drawing. † This dimension differs from the JEDEC drawing. Drawings not to scale. Supertex Doc.#: DSPD-3TO92N3, Version E041009. (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to http://www.supertex.com/packaging.html.) Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com) Supertex inc. ©2013 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited. Doc.# DSFP-TN0702 C080813 5 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com