Product Overview MC10EP17: Quad Differential Driver/Receiver For complete documentation, see the data sheet Product Description The MC10/100EP17 is a 4-bit differential line receiver based on the EP16 device. The >3.0 GHz maximum frequency provided by the high frequency outputs makes the device ideal for buffering of very high speed oscillators. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. The design incorporates two stages of gain, internal to the device, making it an excellent choice for use in high bandwidth amplifier applications. Inputs of unused gates can be left open and will not affect the operation of the rest of the device. All VCC and VEE pins must be externally connected to power supply to guarantee proper operation. The 100 Series contains temperature compensation. Features • • • • • • • • • 220ps Typical Propagation Delay Maximum Frequency >3.0 GHz Typical PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V NECL Mode Operating Range: VCC= 0 V with VEE= -3.0 V to -5.5 V Open Input Default State Safety Clamp on Inputs Q Output Will Default LOW with Inputs Open or at VEE VBB Output Pb-Free Packages are Available Applications • Ideal for buffering high speed oscillators Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) MC10EP17DTG Pb-free Active Signal Driver 4 1:1 ECL Signal Driver 4 Signal Driver 4 Signal Driver 4 Signal Driver 4 Halide free MC10EP17DTR2G Pb-free Active Halide free MC10EP17DWR2G Pb-free Active Halide free MC10EP17MNG Pb-free Active Halide free MC10EP17MNTXG Pb-free Halide free Active CML ECL 1:1 ECL ECL ECL CML ECL ECL CML fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type 0.147 0.22 220 3000 TSSO P-20 5 0.147 0.22 220 3000 TSSO P-20 5 0.147 0.22 220 3000 SOIC20W 0.147 0.22 220 3000 QFN20 0.147 0.22 220 3000 QFN20 3.3 ECL ECL 1:1 tR & tF Max (ps) 3.3 CML 1:1 tpd Typ (ns) 5 CML 1:1 3.3 5 3.3 ECL 5 3.3 For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016 tskew(oo) Max (ps)