Product Overview NB100LVEP17: Quad Differential Driver/Receiver/Buffer For complete documentation, see the data sheet Product Description The NB100LVEP17 is a 4-bit differential line receiver. The design incorporates two stages of gain, internal to the device, making it an excellent choice for use in high bandwidth amplifier applications. </bR>The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. </bR>Inputs of unused gates can be left open and will not affect the operation of the rest of the device. Features • • • • • • • 250 ps Typical Propagation Delay Maximum Frequency >2.5 GHz Typical Flow through Pinout PECL Mode Operating Range: VCC = 2.375 V to 3.8 V, with VEE = 0 V NECL Mode Operating Range: VCC = 0 V, with VEE = -2.375 V to -3.8 V Q Output will Default LOW with Inputs Open or at VEE VBB Output Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type NB100LVEP17DTG Pb-free Active Signal Driver 4 1:1 ECL 0.5 25 0.25 225 2500 2500 TSSO P-20 0.5 25 0.25 225 2500 2500 TSSO P-20 0.5 25 0.25 225 2500 2500 QFN24 0.5 25 0.25 225 2500 2500 QFN24 Halide free NB100LVEP17DTR2G Pb-free Active Halide free NB100LVEP17MNG Pb-free Active Halide free NB100LVEP17MNR2 G Pb-free Halide free Active Signal Driver Signal Driver Signal Driver 4 4 4 1:1 1:1 1:1 ECL 3.3 CML 2.5 LVD S 5 ECL ECL 3.3 CML 5 LVD S 2.5 CML ECL 5 ECL 3.3 LVD S 2.5 CML LVD S ECL 5 2.5 3.3 ECL For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016