Product Overview NB7L216: Multi Level Clock/Data Input to RSECL High Gain Receiver/Buffer/ Translator with Internal Termination For complete documentation, see the data sheet Product Description The NB7L216 is a differential receiver/driver with high gain output targeted for high frequency applications. The device is functionally equivalent to the NBSG16 but with much higher gain output. This highly versatile device provides 35 dB of gain up to 7 GHz. Inputs incorporate internal 50 Ω termination resistors and accept NECL (Negative ECL), PECL (Positive ECL), HSTL, LVTTL, LVCMOS, CML, or LVDS. Outputs are RSECL (Reduced Swing ECL), 400 mV. The VBB pin is internally generated voltage supply available to this device only. The VBB is used as a reference voltage for singleended NECL or PECL inputs. For all single-ended input conditions, the unused complementary differential input is connected to VBB as a switching reference voltage. VBB may also re bias AC coupled inputs. When used, decouple VBB via a 0.01 µF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB output should be left open. Features • • • • • • • • • • High Gain of 35 dB from DC to 7 GHz High IIP3: 0 dB 20 mV Minimum Input Voltage Swing Maximum Input Clock Frequency > 8.5 GHz Typical Maximum Input Data Rate > 12 Gb/s 120 ps Typical Propagation Delay 30 ps Typical Rise and Fall Times RSECL Output Level (400 mV Peak-to-Peak Output),Differential Output Only 50 ohms Internal Input Termination Resistors (temp-coefficient of < 6 m/C) Functionally Compatible with Existing 2.5 V / 3.3 V LVEL, LVEP, EP, and SG Devices For more features, see the data sheet Applications • OC-192 Data Buffer • High Speed Post Amplifier • Test Equipment Front-end Amplifier Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) NB7L216MNG Pb-free Active Signal Driver 1 1:1 ECL Halide free ECL TTL 3.3 tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type 0.1 0.18 45 8500 12000 QFN16 0.1 0.18 45 8500 12000 QFN16 2.5 LVD S CML CMO S NB7L216MNR2G Pb-free Halide free Active Signal Driver 1 1:1 CMO S ECL 3.3 2.5 ECL LVD S CML TTL For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016