DG9051, DG9052, DG9053 Vishay Siliconix Precision 8-Ch/Dual 4-Ch/Triple 2-Ch Low Voltage Analog Switches/Multiplexers DESCRIPTION FEATURES The DG9051, DG9052, DG9053 are low-voltage monolithic CMOS analog switches and multiplexers. DG9051 is an 8-channel multiplexer; DG9052 is a dual 4 channel multiplexer; and DG9053 is a triple single-pole/double throw (SPDT) switch. They are designed to operate from a + 2.7 V to + 12 V single supply or ± 2.7 V to ± 6 V dual power supplies. All control logic inputs have guaranteed 2 V logic high/0.8 V logic low when operating from a single 5 V or dual ± 5 V supplies, and 2.4 V logic high/0.8 V logic low when V + = 12 V. Built on Vishay Siliconix’s proprietary high-density process, the DG9051, DG9052, DG9053 offer the advantage of bi-directional signal, rail to rail analog signal handling. As a committed partner to the community and the environment, Vishay Siliconix manufactures this product with the Lead (Pb)-Free device terminations. For analog switching products manufactured with 100 % matte tin device termination, the Lead (Pb)-free “-E3”suffix is being used as a de-signator. • Halogen-free according to IEC 61249-2-21 Definition • 2.7 V to 12 V single supply or ± 2.7 V to ± 6 V dual aupply operation • Guaranteed RON matching • Low Voltage CMOS Logic Compatible • Compliant to RoHS Directive 2002/95/EC BENEFITS • Wide operation voltage range • Pin compatible with 74HC4051/2/5 • Guaranteed low leakage APPLICATIONS • • • • Battery powered equipment Test process equipment Communication systems A/V and mixed signal routing • Automotive FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG9051 X4 1 DG9053 DG9052 16 VCC Y0 1 16 VCC Y1 1 16 VCC Y2 2 15 X2 Y0 2 15 Y X6 2 15 X2 X 3 14 X1 Y 3 14 X1 Z1 3 14 X X7 4 13 X0 Y3 4 13 X Z 4 13 X1 X5 5 12 X3 Y1 5 12 X0 Z0 5 12 X0 Enable 6 11 A Enable 6 11 X3 Enable 6 11 A VEE 7 10 B VEE 7 10 A VEE 7 10 B 9 C GND 8 9 B GND 8 9 C GND Logic 8 Logic ORDERING INFORMATION Temp. Range Package - 40 °C to 85°C TSSOP-16 Part Number DG9051DQ-T1-E3 DG9052DQ-T1-E3 DG9053DQ-T1-E3 The information shown here is a preliminary product proposal, not a commercial product data sheet. Siliconix is not committed to produce this or any similiar product. This information should not be used for design purposes, nor construed as an offer to furnish or sell such products. Document Number: 73410 S11-1066-Rev. B, 30-May-11 www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9051, DG9052, DG9053 Vishay Siliconix TRUTH TABLE Select Inputs On Switches Enable Input C* B A DG9051 DG9052 DG9053 H X X X All switches open All switches open All switches open L L L L X - X0 X - X0, Y - Y0 X - X0, Y - Y0, Z - Z0 L L L H X - X1 X - X1, Y - Y1 X - X1, Y - Y0, Z - Z0 L L H L X - X2 X - X2, Y - Y2 X - X0, Y - Y1, Z - Z0 L L H H X - X3 X - X3, Y - Y3 X - X1, Y - Y1, Z - Z0 L H L L X - X4 X - X0, Y - Y0 X - X0, Y - Y0, Z - Z1 L H L H X - X5 X - X1, Y - Y1 X - X1, Y - Y0, Z - Z1 L H H L X - X6 X - X2, Y - Y2 X - X0, Y - Y1, Z - Z1 L H H H X - X7 X - X3, Y - Y3 X - X1, Y - Y1, Z - Z1 X = Don’t care ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) Parameter Limit V+ Voltage Referenced to VDigital Inputsa GND 7 VS, VD (V -) - 0.3 to (V +) + 0.3 Current (Any Terminal Except S or D) 30 Continuous Current, S or D 100 Peak Current, S or D (Pulsed at 1 ms, 10 % Duty Cycle Max.) 200 Package Solder Reflow Conditionsb IR/Convection Storage Temperature Power Dissipation (Packages)c www.vishay.com 2 Unit 13.5 260 - 65 to 150 TA = 70 °C, TSSOP-16d 925 V mA °C mW Document Number: 73410 S11-1066-Rev. B, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9051, DG9052, DG9053 Vishay Siliconix SPECIFICATIONS (Single Supply 12 V) Parameter Symbol Test Condition Unless Otherwise Specified V + = 12 V, ± 10 %, V - = 0 V Limits - 40 °C to 85°C VA, VEN = 0.8 V or 2.4 Vf Temp.b Min.c Full 0 RON VD = 3.5 V, IS = 1 mA Sequence Each Switch On Room Full RON VD = 3.5 V, IS = 1 mA Room Typ.d Max.c Unit 12 V 40 50 Analog Switch Analog Signal Rangee On-Resistance RON Match Between Channelsg VANALOG IS(off) VEN = 2.4 V, VD = 11 V or 1 V, VS = 1 V or 11 V Switch Off Leakage Current ID(off) Channel On Leakage Current ID(on) VEN = 0 V, VS = VD = 1 V or 11 V 30 5 Room Full -1 - 20 1 20 Room Full -1 - 20 1 20 Room Full -2 - 10 2 10 2.4 nA Digital Control Logic High Input Voltage VINH Full Logic Low Input Voltage VINL Full Input Current IIN VAX = VEN = 2.4 V or 0.8 V Full tTRANS VNO/VNC = 8 V/0 V, 0 V/8 V RL = 300 , CL = 35 pF Room Full 0.8 -1 1 V µA Dynamic Characteristics Transition Time Break-Before-Make Time Enable Turn-On Time tON(EN) Enable Turn-Off Time tOFF(EN) Charge Injectione Off-Isolation Q e,h OIRR e XTALK Crosstalk Source Off Capacitancee Drain Off Room Full tBBM VX,Y, Z = 5 V, VS = 0 V, RL = 306 , CL = 35 pF CL = 1 nF, VGEN = 0 V, RGEN = 0 f = 1 MHz, RL = 50 26 3 10 ns Room Full 20 35 45 Room Full 16 30 40 Room 38 Room - 78 Room - 83 CS(off) f = 1 MHz, VS = 0 V, VEN = 2.4 V Room 4 Capacitancee CD(off) f = 1 MHz, VD = 0 V, VEN = 2.4 V Room 8 e CD(on) f = 1 MHz, VD = 0 V, VEN = 0 V Room 15 I+ VEN = VA = 0 V or V+ Room Drain On Capacitance 35 55 pC dB pF Power Supply Power Supply Current Document Number: 73410 S11-1066-Rev. B, 30-May-11 1 µA www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9051, DG9052, DG9053 Vishay Siliconix SPECIFICATIONS (Dual Supply V + = 5 V, V - = - 5 V) Parameter Symbol Test Condition Unless Otherwise Specified V + = 5 V, V - = - 5 V ± 10 % Limits - 40 °C to 85°C VA, VEN = 0.8 V or 2 Vf Temp.b Min.c Full -5 V + = 4.5 V, V - = - 4.5 V, VD = ± 3 V, IS = 1 mA Sequence Each Switch On Room Full Typ.d Max.c Unit 5 V 35 55 60 Analog Switch Analog Signal Rangee VANALOG RON On-Resistance RON Match Between Channelsg RON RON Flatness On-Resistance Flatnessi IS(off) Switch Off Leakage Current a ID(off) Channel On Leakage Currenta ID(on) Room V + = 4.5 V, V - = - 4.5 V, VD = ± 3 V, IS = 1 mA V + = 5.5 V, V - = - 5.5 V VEN = 2 V, VD = ± 4 .5 V, VS = ± 4.5 V V + = 5.5 V, V - = - 5.5 V VEN = 0 V, VD = ± 4.5 V, VS = ± 4.5 V 5 Room 7 10 Room Full -1 - 20 1 20 Room Full -1 - 20 1 20 Room Full -2 - 10 2 10 2 nA Digital Control Logic High Input Voltage VINH Full Logic Low Input Voltage VINL Full Input Currenta IIN VAX = VEN = 2 V or 0.8 V Full tTRANS V + = 4.5 V, V - = - 4.5 V VNO/NC = ± 3 V, RL = 300 , CL = 35 pF Room Full 0.8 -1 1 V µA Dynamic Characteristics Transition Timee Break-Before-Make Timee Room Full tBBM Enable Turn-On Timee tON(EN) Enable Turn-Off Timee tOFF(EN) VX,Y, Z = +/- 3 V, VS = 0 V, RL = 300 , CL = 35 pF 35 5 12 ns Room Full 38 55 70 Room Full 22 35 50 Source Off Capacitancee CS(off) f = 1 MHz, VS = 0 V, VEN = 2 V Room 5 Drain Off Capacitancee CD(off) f = 1 MHz, VD = 0 V, VEN = 2 V Room 9 e CD(on) f = 1 MHz, VD = 0 V, VEN = 0 V Room 13 Drain On Capacitance 50 65 pF Power Supply Power Supply Current www.vishay.com 4 I+ I- VEN = VA = 0 V or V + Room Room 1 -1 µA Document Number: 73410 S11-1066-Rev. B, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9051, DG9052, DG9053 Vishay Siliconix SPECIFICATIONS (Single Supply 5 V) Parameter Symbol Test Condition Unless Otherwise Specified V + = 5 V, ± 10 %, V - = 0 V Limits - 40 °C to 85°C VA, VEN = 0.8 V or 2 Vf Temp.b Min.c VANALOG Full 0 RON V + = 4.5 V, VD or VS = 3 V or 3.5 V, IS = 1 mA Room Full RON V + = 4.5 V, VD = 3 V, IS = 1 mA Room Typ.d Max.c Unit 5 V 80 100 120 Analog Switch Analog Signal Rangee On-Resistance RON Match Between Channelsg IS(off) Switch Off Leakage Currenta ID(off) Channel On Leakage Currenta ID(on) V + = 5.5 V, VEN = 2 V VS = 1 V or 4.5 V, VD = 4.5 V or 1 V V + = 5.5 V, VEN = 0 V VD = VS = 1 V or 4.5 V 8 Room Full -1 - 20 1 20 Room Full -1 - 20 1 20 Room Full -2 - 10 2 10 2 nA Digital Control Logic High Input Voltage VINH Full Logic Low Input Voltage VINL Full Input Currenta 0.8 IIN VAX = VEN = 2 V or 0.8 V Full tTRANS V + = 4.5 V, V - = 0 V, VNO / NC = 3 V / 0 V, 0 V / 3 V, RL = 300 , CL = 35 pF Room 40 -1 1 V µA Dynamic Characteristics Transition Time Break-Before-Make Time tBBM Enable Turn-On Time tON(EN) Enable Turn-Off Time tOFF(EN) Charge Injection Off-Isolation e e,h e Crosstalk Source Off Capacitancee Q OIRR XTALK V + = 4.5 V, VX,Y, Z = 3 V, VS = 0 V, RL = 300 , CL = 35 pF Room 15 Room 40 Room 20 CL = 1 nF, VGEN = 0 V, RGEN = 0 Room 20 Room - 79 Room - 83 4 f = 1 MHz, RL = 50 CS(off) f = 1 MHz, VS = 0 V, VEN = 0 V Room Capacitancee CD(off) f = 1 MHz, VD = 0 V, VEN = 2 V Room 8 Drain On Capacitancee CD(on) f = 1 MHz, VD = 0 V, VEN = 0 V Room 15 I+ VEN = VA = 0 V or V + Room Drain Off ns pC dB pF Power Supply Power Supply Current Document Number: 73410 S11-1066-Rev. B, 30-May-11 1 µA www.vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9051, DG9052, DG9053 Vishay Siliconix SPECIFICATIONS (Single Supply 3 V) Parameter Symbol Test Condition Unless Otherwise Specified V + = 3 V, ± 10 %, V - = 0 V VEN = 0.4 V or 2 V Limits - 40 °C to 85°C Temp.b Min.c Full 0 Typ.d Max.c Unit 3 V Analog Switch Analog Signal Rangee VANALOG On-Resistance RON Match Between Channelsg RON V + = 2.7 V, VD = 1.5 V, IS = 0.1 mA Room RON V + = 2.7 V, VD = 1.5 V, IS = 0.1 mA Room IS(off) Switch Off Leakage Current a ID(off) Channel On Leakage Currenta ID(on) V + = 3.3 V, VEN = 2 V VS = 3 or 0.3 V, VD = 0.3 or 3 V V + = 3.3 V, VEN = 0 V VS = 3 or 0.3 V, VD = 0.3 or 3 V 130 12 Room Full -1 - 20 1 20 Room Full -1 - 20 1 20 Room Full -2 - 10 2 10 2 nA Digital Control Logic High Input Voltage VINH Full Logic Low Input Voltage VINL Full Input Currenta IIN VAX = VEN = 2 V or 0.4 V Full tTRANS V + = 2.7 V, VNO/NC = 1.5 V/0 V, 0 V/1.5 V RL = 300 , CL = 35 pF Room 0.4 -1 1 V µA Dynamic Characteristics Transition Time Break-Before-Make Time tBBM Enable Turn-On Time tON(EN) Enable Turn-Off Time tOFF(EN) e Charge Injection e,h Q Off-Isolation OIRR Crosstalke XTALK Source Off Capacitancee V + = 2.7 V, VX,Y, Z = 1.5 V, VS = 0 V, RL = 300 , CL = 35 pF CL = 1 nF, VGEN = 0 V, RGEN = 0 f = 1 MHz, RL = 50 Room Full 80 25 ns 5 Room 90 Room 30 Room 9 Room - 78 Room - 83 CS(off) f = 1 MHz, VS = 0 V, VEN = 1.8 V Room 5 Drain Off Capacitancee CD(off) f = 1 MHz, VD = 0 V, VEN = 1.8 V Room 10 Drain On Capacitancee CD(on) f = 1 MHz, VD = 0 V, VEN = 0 V Room 15 I+ VEN = VA = 0 V or V + Room pC dB pF Power Supply Power Supply Current 1 µA Notes: a. Leakage parameters are guaranteed by worst case test condition and not subject to production test. b. Room = 25°C, Full = as determined by the operating temperature suffix. c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. d. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. e. Guaranteed by design, not subject to production test. f. VIN = input voltage to perform proper function. g. RDON = RDON Max - RDON Min. h. Worst case isolation occurs on Channel 4 due to proximity to the drain pin. i. RDON flatness is measured as the difference between the minimum and maximum measured values across a defined Analog signal. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.vishay.com 6 Document Number: 73410 S11-1066-Rev. B, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9051, DG9052, DG9053 Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 200 200 IS = 1 mA T = 25 °C IS = 1 mA 160 A = 85 °C B = 25 °C C = - 40 °C V+ = 2.7 V 150 V+ = 2.7 V A 120 B 100 C 80 A R ON - R ON - V+ = 4.5 V 50 V+ = 12 V C V+ = 12 V 40 V+ = 4.5 V B A B C 0 0 0 4 8 VCOM - Analog Voltage (V) 0 12 2 4 6 8 10 12 VCOM - Analog Voltage (V) RON vs. VCOM and Supply Voltage RON vs. Analog Voltage and Temperature 80 A = 85 °C B = 25 °C C = - 40 °C 60 VEN = 0 V 10 000 B Supply Current (pA) A C R ON - 40 V+ = 12 V 100 V+ = 5 V V- = - 5 V 20 1 - 40 0 -5 -3 -1 1 3 5 - 20 0 VCOM - Analog Voltage (V) RON vs. Analog Voltage and Temperature 40 60 80 100 Supply Current vs. Temperature 40 80 VCC = ± 5 V TA =V+ 25=°C 5V 30 VCC = + 12 V TA = 25 °C 60 20 40 Leakage Current (pA) Leakage Current (pA) 20 Temperature (°C) IS(off) 10 ID(off) 0 - 10 ID(on) - 20 20 IS(off) 0 ID(on) - 20 ID(off) - 40 - 60 - 30 - 80 - 40 -5 -4 -3 -2 -1 0 1 2 3 4 5 0 2 4 6 8 12 10 VCOM, V NO, V NC - Analog Voltage (V) VCOM, V NO, V NC - Analog Voltage (V) Leakage Current vs. Analog Voltage Leakage Current vs. Analog Voltage Document Number: 73410 S11-1066-Rev. B, 30-May-11 www.vishay.com 7 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9051, DG9052, DG9053 Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 3.0 10 000 2.5 VT - Switching Threshold (V) Leakage Current (pA) V+ = 5 V V- = - 5 V 1000 INO(off), IINC(off) ID(off) 100 ID(on) 10 2.0 1.5 1.0 0.5 IS(off) 1 - 40 0.0 - 20 0 20 40 60 80 0 100 2 4 6 8 10 12 14 V+ - Supply Voltage (V) Temperature (°C) Leakage Current vs. Temperature Switching Threshold vs. Supply Voltage 0 50 Insertion Loss 40 30 Q - Charge Injection (pc) Loss, OIRR, XTALK (dB) - 20 - 40 - 60 OIRR - 80 Crosstalk V+ = 6 V V- = - 6 V RL - 100 - 120 10K 20 10 0 V+ = 12 V - 10 V+ = 2.7 V - 20 V+ = 4.5 V - 30 V+ = 6 V - 40 - 50 100K 1M 10M 100M 1G 0 2 4 Frequency (Hz) 6 8 10 12 14 VCOM - Analog Voltage (V) Insertion Loss, Off-Isolation Crosstalk vs. Frequency Charge Injection vs. Analog Voltage 10 m V+ = 12 V V- = 0 V I+ - Supply Current (nA) 1m 100 µ 10 µ 1µ 100 n 10 n 1n 10 100 1K 10K 100K 1M 10M Input Switching Frequency (Hz) Supply Current vs. Input Switching Frequency www.vishay.com 8 Document Number: 73410 S11-1066-Rev. B, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9051, DG9052, DG9053 Vishay Siliconix TEST CIRCUITS V+ A2 S1 A1 50 Logic Input S2 - S 7 A0 DG9051 S8 VS8 VAX GND 3V 50 % 0V VO D EN tr < 5 ns tf < 5 ns VS1 V- VS1 35 pF 300 90 % Switch Output V- VO 50 % V+ 90 % VS8 V+ A1 A0 tTRANS VS1b S1b S1 ON S1a - S 4a, Da 50 DG9052 S4b EN VS4b VO Db GND V- S8 ON (DG9408) or S4 ON (DG9409) tTRANS Return to Specifications: Single Supply 12 V 35 pF 300 Dual Supply V+ = 5 V, V- = - 5 V Single Supply 5 V V- Single Supply 3 V V+ Figure 1. Transition Time V+ V+ S1 EN VS1 S2 - S 8 A0 DG9051 A1 A2 GND VO D V- 50 Logic Input 50 % 0V 35 pF 300 tr < 5 ns tf < 5 ns 3V tOFF(EN) V- tON(EN) 0V 90 % V+ Switch Output VO V+ S1b EN A0 A1 GND VS1 90 % VO S1a - S4a, Da S2b - S4b Return to Specifications: Single Supply 12 V DG9052 Db V- 50 VO Dual Supply V+ = 5 V, V- = - 5 V Single Supply 5 V 300 35 pF Single Supply 3 V V- Figure 2. Enable Switching Time Document Number: 73410 S11-1066-Rev. B, 30-May-11 www.vishay.com 9 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9051, DG9052, DG9053 Vishay Siliconix TEST CIRCUITS V+ All S and Da tr < 5 ns tf < 5 ns 3V Logic Input EN 50 % VS1 0V A0 A1 Db, D A2 GND VO VS V- 90 % Switch Output 50 V- 35 pF 300 VO tOPEN 0V Return to Specifications: Single Supply 12 V Dual Supply V+ = 5 V, V- = - 5 V Single Supply 5 V Single Supply 3 V Figure 3. Break-Before-Make Interval V+ Rg V+ SX Logic Input EN Vg OFF ON OFF 0V A0 Channel Select 3V VO D A1 CL 1 nF A2 GND VO Switch Output V- VO is the measured voltage due to charge transfer error Q, when the channel turns off. V- Q = CL x VO Figure 4. Charge Injection V+ V+ VIN Rg = 50 V+ SX VIN RIN 50 S8 A0 D Rg = 50 A2 V- SX S8 A0 VOUT A1 GND V+ S1 EN D A2 RL 50 GND EN VOff Isolation = 20 log Crosstalk = 20 log www.vishay.com 10 RL 50 VOUT VIN VIN Figure 5. Off Isolation V- VVOUT VOUT A1 Figure 6. Crosstalk Document Number: 73410 S11-1066-Rev. B, 30-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DG9051, DG9052, DG9053 Vishay Siliconix TEST CIRCUITS VIN S1 V+ V+ V+ V+ Rg = 50 S1 Meter A2 A0 D VOUT A1 Channel Select HP4192A Impedance Analyzer or Equivalent S8 A1 A0 A2 GND EN V- RL 50 VInsertion Loss = 20 log D GND VOUT EN f = 1 MHz V- V- VIN Figure 7. Insertion Loss Figure 8. Source Drain Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?73410. Document Number: 73410 S11-1066-Rev. B, 30-May-11 www.vishay.com 11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix TSSOP: 16-LEAD DIMENSIONS IN MILLIMETERS Symbols Min Nom Max A - 1.10 1.20 A1 0.05 0.10 0.15 A2 - 1.00 1.05 0.38 B 0.22 0.28 C - 0.127 - D 4.90 5.00 5.10 E 6.10 6.40 6.70 E1 4.30 4.40 4.50 e - 0.65 - L 0.50 0.60 0.70 L1 0.90 1.00 1.10 y - - 0.10 θ1 0° 3° 6° ECN: S-61920-Rev. D, 23-Oct-06 DWG: 5624 Document Number: 74417 23-Oct-06 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1