GaAs MMIC CGY 99 Preliminary Data Sheet • • • • • • Broadband 3-stage Power Amplifier (800 … 2400 MHz) GSM, AMPS, PCN, PCS Operating voltage range: 2.7 to 6.0 V Pout = 35.0 dBm at VD = 3.5 V Overall power added efficiency 55% Easy external matching P-TSSOP-10-2 ESD: Electrostatic discharge sensitive device, observe handling precautions! Type Marking Ordering Code (taped) Package CGY 99 t.b.d. t.b.d. P-TSSOP-10-2 Maximum Ratings Symbol Value Unit Positive supply voltage VD 6 V Channel temperature TCh 150 °C Storage temperature Tstg – 55 … + 150 °C Total power dissipation (Ts ≤ 81 °C) Ts: Temperature at soldering point Ptot 4.0 W Pulse peak power duty cycle 12.5%, ton = 0.577 ms PPulse 10.0 W Thermal Resistance Symbol Value Unit Channel-soldering point RthChS 14 K/W Data Book 1 03.00 CGY 99 VD1 VD2 3 RF IN / VG 1, 2 4 7, 8, 9 11 GND1 Figure 1 CGY 99 RF OUT / VD3 11 GND Functional Block Diagram Pin # Name Configuration 1,2 VD2 Drain voltage 2nd stage 3 VD1 Drain voltage 1st stage 4 RFin/VG RF input/gate voltage 5 n.c. – 6 n.c. – 7, 8, 9 VD3/RFout RF output/drain voltage 3rd stage 10 n.c. – 11 GND Ground 2nd and 3rd stage (backside of P-TSSOP-10-2 package) Data Book EHT08924 2 03.00 CGY 99 GSM-Operation Electrical Characteristics (On GSM Application Board) TA = 25 °C, ZS = ZL = 50 Ω, duty cycle 12.5%, ton = 577 µs, unless otherwise specified. Parameters Symbol Limit Values min. typ. max. Unit Test Conditions Frequency range f 880 – 915 MHz – Supply current IDD – 1.6 – A VD = 3.5 V, Pin = + 5 dBm Power Gain G – 30 – dB VD = 3.5 V, Pin = + 5 dBm Output Power Po – 33.2 – dBm VD = 2.8 V, Pin = + 5 dBm Output Power Po – 34.4 – dBm VD = 3.2 V, Pin = + 5 dBm Output Power Po – 35.0 – dBm VD = 3.5 V, Pin = + 5 dBm Overall Power added Efficiency PAE – 55 – % VD = 3.5 V, Pin = + 5 dBm Harmonics 2 f0 3 f0 – dBc – Input VSWR – – VD = 3.5 V or VD = 4.8 V – – – 40 – 40 – – – 2:1 – Load mismatch – Load VSWR = 20 : 1 for all phase No module damage for 10 s. – Pin = 5 dBm, VD ≤ 4.6 V, ZS = 50 Ω Stability Load VSWR = 5 : 1 for all phase All spurious output more – than 70 dB below desired signal level Pin = 5 dBm, VD = 4.6 V, ZS = 50 Ω Data Book – 3 03.00 CGY 99 GSM-Measurements CGY 99 f = 900 MHz, Pin = 5 dBm, VG = – 0.9 V CGY 99 f = 900 MHz, VD = 3.5 V, VG = – 0.9 V EHT08925 36 dBm POUT 35 34 70 60 32 PAE 35 40 34 35 33 30 25 40 30 30 29 20 28 10 32 0 31 2 4 dBm 8 2.4 2.8 3.2 3.6 4 4.4 V 5 20 VD PIN Data Book 45 POUT 50 0 60 % PAE 55 50 36 31 27 -10 -8 -6 -4 -2 PAE 37 POUT 33 EHT08926 39 dBm POUT 38 90 % 80 PAE 4 03.00 CGY 99 PCN(DCS1800)-Operation Electrical Characteristics (On GSM Application Board) TA = 25 °C, ZS = ZL = 50 Ω, duty cycle 12.5%, ton = 577 µs, unless otherwise specified. Parameters Symbol Limit Values min. typ. max. Unit Test Conditions Frequency range f 1710 – 1785 MHz – Supply current IDD – 1.6 – A VD = 3.5 V, Pin = + 5 dBm Power Gain G – 29 – dB VD = 3.5 V, Pin = + 5 dBm Output Power Po – 32.1 – dBm VD = 2.8 V, Pin = + 5 dBm Output Power Po – 33.4 – dBm VD = 3.2 V, Pin = + 5 dBm Output Power Po – 34.0 – dBm VD = 3.5 V, Pin = + 5 dBm Overall Power added Efficiency PAE – 45 – % VD = 3.5 V, Pin = + 5 dBm Harmonics 2 f0 3 f0 – dBc – Input VSWR – – VD = 3.5 V or VD = 4.8 V – Pin = 5 dBm, VD ≤ 4.6 V, ZS = 50 Ω – – – 40 – 40 – – – 2:1 – Load mismatch – Load VSWR = 20 : 1 for all phase No module damage for 10 s. Stability Load VSWR = 5 : 1 for all phase All spurious output more – than 70 dB below desired signal level. Data Book – 5 Pin=5dBm, VD = 4.6 V, ZS = 50 Ω 03.00 CGY 99 PCN-Measurements (Board Matched for Maximum Output Power) CGY 99 f = 1750 MHz, Pin = 5 dBm, VG = – 0.58 V CGY 99 f = 1750 MHz, VG = – 0.58 V, VD = 3.15 V EHT08927 36 dBm POUT 34 80 % PAE 70 EHT08928 38 dBm POUT PAE 37 32 30 60 POUT 40 20 22 10 20 -10 -8 -6 -4 -2 0 35 30 34 20 33 10 30 PAE 24 2 4 0 6 dBm 10 32 PIN Data Book 40 50 28 26 PAE 50 POUT 36 60 % 2.6 3 3.4 3.8 4.2 4.6 V 5 0 VD 6 03.00 CGY 99 PCN-Measurements (Board Matched for Reduced Output Power) CGY 99 f = 1750 MHz, Pin = 5 dBm, VG = – 0.58 V CGY 99 f = 1750 MHz, VG = – 0.58 V, VD = 3.15 V EHT08929 36 dBm POUT 34 32 30 POUT 28 80 % PAE 70 EHT08930 38 dBm POUT 37 60 36 50 35 40 34 80 % PAE 70 60 PAE 50 40 POUT PAE 26 30 33 30 24 20 32 20 22 10 31 10 20 -10 -8 -6 -4 -2 0 2 4 0 6 dBm 10 30 PIN Data Book 2.4 2.8 3.2 3.6 4 4.4 V 5 0 VD 7 03.00 CGY 99 VD VG L1 C2 GND L2 C4 C3 L3 R1 C1 C5 CGY 99 C6 C7 RF OUT RF IN BS CGY 99 V1.0 EHT08931 Figure 2 CGY 99 GSM Application Board Bordmaterial: FR4/0.2 mm Boardsize: 38 mm × 19 mm Part List Value Part Type Value Part Type L1 1.5 nH 0603 C5 12 pF 06031) L2 39 nH 0603 C6 8.2 pF 06031) L3 33 nH 2) C7 1 nF 0603 C1 1 nF 0603 R1 150 Ω 0603 C2 1 nF 0603 – – – C3 1 nF 0603 – – – C4 100 nF 0603 – – – 1) 2) For maximum efficiency use high quality capacitors for the output matching: Part Number ACCU-P0603, distribution by AVX Gmb, 85757 Karlsfeld, Germany Phone-No +498131/9004-0 33 nH SMD-Inductor for drain3: Part Number BV1250, distribution by Horst David GmbH, 85375 Neufarn, Germany Phone-No +498165/9548-0, Fax-No +498165/9548-28 Data Book 8 03.00 CGY 99 VD VG L1 GND L2 C4 C3 L3 R1 C1 C2 C5 CGY 99 C6 C7 RF OUT RF IN BS CGY 99 V1.0 EHT08932 Figure 3 CGY 99 PCN Application Board Bordmaterial: FR4/0.2 mm Boardsize: 38 mm × 19 mm Part List Value Part Type Value Part Type L1 22 nH 0603 C5 4.7 pF 06031) L2 22 nH 0603 C6 2.0 pF 06031) L3 33 nH 2) C7 1 nF 0603 C1 1 nF 0603 R1 150 Ω 0603 C2 56 pF 0603 – – – C3 4.7 pF 06031) – – – C4 100 nF 0603 – – – 1) 2) For maximum efficiency use high quality capacitors for the output matching: Part Number ACCU-P0603, distribution by AVX Gmb, 85757 Karlsfeld, Germany Phone-No +498131/9004-0 33 nH SMD-Inductor for drain3: Part Number BV1250, distribution by Horst David GmbH, 85375 Neufarn, Germany Phone-No +498165/9548-0, Fax-No +498165/9548-28 Data Book 9 03.00 CGY 99 Package Outlines 0.5 0.1 A A 0.22 ±0.05 0.08 M 6 max. 0.42 +0.15 -0.1 ABC 4.9 0.25 A B C 3 ±0.1 GPS09230 1.6 2.4 B +0.08 0.125 -0.05 3 ±0.1 H 0.09 0.15 max. 0.85 ±0.1 1.1 max. P-TSSOP-10-2 (Plastic Thin Shrink Small Outline Package) C Index Marking Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book “Package Information”. SMD = Surface Mounted Device Data Book 10 Dimensions in mm 03.00