Philips Semiconductors Product specification Rectifier diodes Schottky barrier FEATURES PBYR10100 series SYMBOL • Low forward volt drop • Fast switching • Reverse surge capability • High thermal cycling performance • Low thermal resistance GENERAL DESCRIPTION QUICK REFERENCE DATA VR = 60 V/ 80 V/ 100 V k 1 a 2 IF(AV) = 10 A VF ≤ 0.7 V PINNING Schottky rectifier diodes in a plastic envelope. Intended for use as output rectifiers in low voltage, high frequency switched mode power supplies. PIN The PBYR10100 series is supplied in the conventional leaded SOD59 (TO220AC) package. tab SOD59 (TO220AC) DESCRIPTION 1 cathode 2 anode tab cathode 1 2 LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER CONDITIONS MIN. PBYR10 VRRM VRWM VR IF(AV) IFRM IFSM IRRM Tj Tstg Peak repetitive reverse voltage Working peak reverse voltage Continuous reverse voltage Average rectified forward current Repetitive peak forward current Non-repetitive peak forward current Peak repetitive reverse surge current Operating junction temperature Storage temperature MAX. UNIT 60 80 100 - 60 80 100 V - 60 80 100 V Tmb ≤ 139 ˚C - 60 80 100 V square wave; δ = 0.5; Tmb ≤ 133 ˚C - 10 A square wave; δ = 0.5; Tmb ≤ 133 ˚C - 20 A t = 10 ms t = 8.3 ms sinusoidal; Tj = 125 ˚C prior to surge; with reapplied VRRM(max) pulse width and repetition rate limited by Tj max - 135 150 A A - 1 A - 150 ˚C - 65 175 ˚C THERMAL RESISTANCES SYMBOL PARAMETER Rth j-mb Rth j-a March 1998 Thermal resistance junction to mounting base Thermal resistance junction to ambient CONDITIONS MIN. in free air 1 TYP. MAX. UNIT - - 2 K/W - 60 - K/W Rev 1.200 Philips Semiconductors Product specification Rectifier diodes Schottky barrier PBYR10100 series ELECTRICAL CHARACTERISTICS Tj = 25 ˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS VF Forward voltage IR Reverse current Cd Junction capacitance IF = 10 A; Tj = 125˚C IF = 20 A; Tj = 125˚C IF = 20 A VR = VRWM VR = VRWM; Tj = 125˚C VR = 5 V; f = 1 MHz, Tj = 25˚C to 125˚C March 1998 MIN. 2 - TYP. MAX. UNIT 0.61 0.74 0.88 5 5 420 0.7 0.85 0.95 150 15 - V V V µA mA pF Rev 1.200 Philips Semiconductors Product specification Rectifier diodes Schottky barrier 15 PBYR10100 series Tmb / C 120 PBYR10100 PF / W Vo = 0.550 V Rs = 0.015 Ohms 100 PBYR10100 10 150 C D = 1.0 130 10 IR / mA 125 C 1 100 C 0.5 0.2 0.1 5 tp I D= 140 tp T 75 C 0.1 Tj = 50 C t T 0 5 0 0.01 150 15 10 0 50 VR/ V IF(AV) / A Fig.1. Maximum forward dissipation PF = f(IF(AV)); square current waveform where IF(AV) =IF(RMS) x √D. 10 Vo = 0.550 V Rs = 0.015 Ohms a = 1.57 8 2.2 Cd/ pF PBYR20100CT 10000 134 1.9 1000 2.8 6 Fig.4. Typical reverse leakage current; IR = f(VR); parameter Tj Tmb / C 130 PBYR10100 PF / W 100 138 4 142 4 100 146 2 0 0 2 4 6 IF(AV) / A 8 150 10 10 1 Fig.2. Maximum forward dissipation PF = f(IF(AV)); sinusoidal current waveform where a = form factor = IF(RMS) / IF(AV). IF / A 10 VR/ V 100 Fig.5. Typical junction capacitance; Cd = f(VR); f = 1 MHz; Tj = 25˚C to 125 ˚C. PBYR10100 10 50 Transient thermal impedance, Zth j-mb (K/W) Tj = 25 C Tj = 125 C 40 1 Typ Max 30 0.1 20 PD 0.01 tp D= 10 0.001 1us 0 0 0.5 1 VF / V 1.5 2 Fig.3. Typical and maximum forward characteristic IF = f(VF); parameter Tj March 1998 T 10us tp T t 100us 1ms 10ms 100ms 1s 10s pulse width, tp (s) PBYR10100 Fig.6. Transient thermal impedance; Zth j-mb = f(tp). 3 Rev 1.200 Philips Semiconductors Product specification Rectifier diodes Schottky barrier PBYR10100 series MECHANICAL DATA Dimensions in mm 4,5 max Net Mass: 2 g 10,3 max 1,3 3,7 2,8 5,9 min 15,8 max 3,0 max not tinned 3,0 13,5 min 1,3 max 1 (2x) 2 0,9 max (2x) 5,08 0,6 2,4 Fig.7. SOD59 (TO220AC). pin 1 connected to mounting base. Notes 1. Refer to mounting instructions for TO220 envelopes. 2. Epoxy meets UL94 V0 at 1/8". March 1998 4 Rev 1.200 Philips Semiconductors Product specification Rectifier diodes Schottky barrier PBYR10100 series DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1998 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. March 1998 5 Rev 1.200