INTEGRATED CIRCUITS DATA SHEET 74HC3G14; 74HCT3G14 Inverting Schmitt-triggers Product specification Supersedes data of 2002 Jul 23 2003 Nov 04 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 FEATURES APPLICATIONS • Wide supply voltage range from 2.0 to 6.0 V • Wave and pulse shapers for highly noisy environments • High noise immunity • Astable multivibrators • Low power dissipation • Monostable multivibrators • Balanced propagation delays • Output capability: standard. • Unlimited input rise and fall times • Very small 8 pins package DESCRIPTION • ESD protection: HBM EIA/JESD22-A114-A exceeds 2000 V MM EIA/JESD22-A115-A exceeds 200 V. The 74HC3G/HCT3G14 is a high-speed Si-gate CMOS device. The 74HC3G/HCT3G14 provides three inverting buffers with Schmitt-trigger action. This device is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. • Specified from −40 to +85 °C and −40 to +125 °C. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 °C; tr = tf ≤ 6.0 ns. TYPICAL SYMBOL PARAMETER CONDITIONS UNIT HC3G14 tPHL/tPLH propagation delay nA to nY CI input capacitance CPD power dissipation capacitance per buffer CL = 50 pF; VCC = 4.5 V 16 notes 1 and 2 Notes 1. CPD is used to determine the dynamic power dissipation (PD in µW). PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in Volts; N = total switching outputs; Σ(CL × VCC2 × fo) = sum of the outputs. 2. For HC3G14 the condition is VI = GND to VCC. For HCT3G14 the condition is VI = GND to VCC − 1.5 V. 2003 Nov 04 2 HCT3G14 21 ns 2 2 pF 10 10 pF Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 FUNCTION TABLE See note 1. INPUT OUTPUT nA nY L H H L Note 1. H = HIGH voltage level; L = LOW voltage level. ORDERING INFORMATION PACKAGE TYPE NUMBER TEMPERATURE RANGE PINS PACKAGE MATERIAL CODE MARKING 74HC3G14DP −40 to +125 °C 8 TSSOP8 plastic SOT505-1 H14 74HCT3G14DP −40 to +125 °C 8 TSSOP8 plastic SOT505-1 T14 74HC3G14DC −40 to +125 °C 8 VSSOP8 plastic SOT765-1 H14 74HCT3G14DC −40 to +125 °C 8 VSSOP8 plastic SOT765-1 T14 PINNING PIN SYMBOL DESCRIPTION 1 1A data input 1A 2 3Y data output 3Y 3 2A data input 2A 4 GND ground (0 V) 5 2Y data output 2Y 6 3A data input 3A 7 1Y data output 1Y 8 VCC supply voltage 2003 Nov 04 3 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 handbook, halfpage handbook, halfpage 1A 1 8 VCC 3Y 2 7 1Y 3G14 2A 3 6 3A GND 4 5 2Y MNA739 1A 1Y 7 2 3Y 3A 6 3 2A 2Y 5 MNA740 Fig.1 Pin configuration. handbook, halfpage 1 1 7 6 2 Fig.2 Logic symbol. handbook, halfpage A Y MNA025 3 5 MNA741 Fig.3 IEC logic symbol. 2003 Nov 04 Fig.4 Logic diagram (one driver). 4 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 RECOMMENDED OPERATING CONDITIONS 74HC3G14 SYMBOL PARAMETER 74HCT3G14 CONDITIONS UNIT MIN. TYP. MAX. MIN. TYP. MAX. VCC supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V VI input voltage 0 − VCC 0 − VCC V VO output voltage 0 − VCC 0 − VCC V Tamb operating ambient temperature +25 +125 −40 +25 +125 °C see DC and AC −40 characteristics per device LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER VCC supply voltage IIK input diode current CONDITIONS VI < −0.5 V or VI > VCC + 0.5 V; note 1 MIN. MAX. UNIT −0.5 +7.0 V − ±20 mA IOK output diode current VO < −0.5 V or VO > VCC + 0.5 V; note 1 − ±20 mA IO output source or sink current −0.5 V < VO < VCC + 0.5 V; note 1 − 25 mA ICC VCC or GND current note 1 − 50 mA Tstg storage temperature −65 +150 °C PD power dissipation − 300 mW Tamb = −40 to +125 °C; note 2 Notes 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. Above 110 °C the value of PD derates linearly with 8 mW/K. 2003 Nov 04 5 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 DC CHARACTERISTICS Type 74HC3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER MIN. TYP. MAX. UNIT VCC (V) OTHER Tamb = 25 °C VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL IO = −20 µA 2.0 1.9 2.0 − V IO = −20 µA 4.5 4.4 4.5 − V IO = −20 µA 6.0 5.9 6.0 − V IO = −4.0 mA 4.5 4.18 4.32 − V IO = −5.2 mA 6.0 5.68 5.81 − V IO = 20 µA 2.0 − 0 0.1 V IO = 20 µA 4.5 − 0 0.1 V IO = 20 µA 6.0 − 0 0.1 V IO = 4.0 mA 4.5 − 0.15 0.26 V VI = VIH or VIL IO = 5.2 mA 6.0 − 0.16 0.26 V ILI input leakage current VI = VCC or GND 6.0 − − ±0.1 µA ICC quiescent supply current VI = VCC or GND; IO = 0 6.0 − − 1.0 µA IO = −20 µA 2.0 1.9 − − V IO = −20 µA 4.5 4.4 − − V IO = −20 µA 6.0 5.9 − − V IO = −4.0 mA 4.5 4.13 − − V IO = −5.2 mA 6.0 5.63 − − V IO = 20 µA 2.0 − − 0.1 V IO = 20 µA 4.5 − − 0.1 V IO = 20 µA 6.0 − − 0.1 V IO = 4.0 mA 4.5 − − 0.33 V IO = 5.2 mA 6.0 − − 0.33 V Tamb = −40 to +85 °C VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL VI = VIH or VIL ILI input leakage current VI = VCC or GND 6.0 − − ±1.0 µA ICC quiescent supply current VI = VCC or GND; IO = 0 6.0 − − 10 µA 2003 Nov 04 6 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 TEST CONDITIONS SYMBOL PARAMETER MIN. TYP. MAX. UNIT VCC (V) OTHER Tamb = −40 to +125 °C VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL IO = −20 µA 2.0 1.9 − − V IO = −20 µA 4.5 4.4 − − V IO = −20 µA 6.0 5.9 − − V IO = −4.0 mA 4.5 3.7 − − V IO = −5.2 mA 6.0 5.2 − − V IO = 20 µA 2.0 − − 0.1 V IO = 20 µA 4.5 − − 0.1 V IO = 20 µA 6.0 − − 0.1 V IO = 4.0 mA 4.5 − − 0.4 V VI = VIH or VIL IO = 5.2 mA 6.0 − − 0.4 V ILI input leakage current VI = VCC or GND 6.0 − − ±1.0 µA ICC quiescent supply current VI = VCC or GND; IO = 0 6.0 − − 20 µA 2003 Nov 04 7 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 Type 74HCT3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER MIN. TYP. MAX. UNIT VCC (V) OTHER Tamb = 25 °C VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL IO = −20 µA 4.5 4.4 4.5 − V IO = −4.0 mA 4.5 4.18 4.32 − V IO = 20 µA 4.5 − 0 0.1 V IO = 4.0 mA 4.5 − 0.15 0.26 V VI = VIH or VIL ILI input leakage current VI = VCC or GND 5.5 − − ±0.1 µA ICC quiescent supply current VI = VCC or GND; IO = 0 5.5 − − 1.0 µA ∆ICC additional supply current per input VI = VCC − 2.1 V; IO = 0 4.5 to 5.5 − − 300 µA IO = −20 µA 4.5 4.4 − − V IO = −4.0 mA 4.5 4.13 − − V IO = 20 µA 4.5 − − 0.1 V IO = 4.0 mA 4.5 − − 0.33 V Tamb = −40 to +85 °C VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL VI = VIH or VIL ILI input leakage current VI = VCC or GND 5.5 − − ±1.0 µA ICC quiescent supply current VI = VCC or GND; IO = 0 5.5 − − 10 µA ∆ICC additional supply current per input VI = VCC − 2.1 V; IO = 0 4.5 to 5.5 − − 375 µA IO = −20 µA 4.5 4.4 − − V IO = −4.0 mA 4.5 3.7 − − V 4.5 − − 0.1 V Tamb = −40 to +125 °C VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL VI = VIH or VIL IO = 20 µA IO = 4.0 mA 4.5 − − 0.4 V ILI input leakage current VI = VCC or GND 5.5 − − ±1.0 µA ICC quiescent supply current VI = VCC or GND; IO = 0 5.5 − − 20 µA ∆ICC additional supply current per input VI = VCC − 2.1 V; IO = 0 4.5 to 5.5 − − 410 µA 2003 Nov 04 8 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 TRANSFER CHARACTERISTICS Type 74HC3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER MIN. WAVEFORMS TYP. MAX. UNIT VCC (V) Tamb = 25 °C VT+ VT- VH positive going threshold voltage negative going threshold voltage hysteresis voltage (VT+ − VT-) see Figs. 5 and 6 see Figs. 5 and 6 see Figs. 5 and 6 2.0 1.0 1.18 1.5 V 4.5 2.3 2.6 3.15 V 6.0 3.0 3.46 4.2 V 2.0 0.3 0.6 0.9 V 4.5 1.13 1.47 2.0 V 6.0 1.5 2.06 2.6 V 2.0 0.3 0.6 1.0 V 4.5 0.6 1.13 1.4 V 6.0 0.8 1.40 1.7 V 2.0 1.0 − 1.5 V 4.5 2.3 − 3.15 V 6.0 3.0 − 4.2 V 2.0 0.3 − 0.9 V 4.5 1.13 − 2.0 V 6.0 1.5 − 2.6 V 2.0 0.3 − 1.0 V 4.5 0.6 − 1.4 V 6.0 0.8 − 1.7 V 2.0 1.0 − 1.5 V 4.5 2.3 − 3.15 V 6.0 3.0 − 4.2 V 2.0 0.3 − 0.9 V 4.5 1.13 − 2.0 V 6.0 1.5 − 2.6 V 2.0 0.3 − 1.0 V 4.5 0.6 − 1.4 V 6.0 0.8 − 1.7 V Tamb = −40 to +85 °C VT+ VT- VH positive going threshold voltage negative going threshold voltage hysteresis voltage (VT+ − VT-) see Figs. 5 and 6 see Figs. 5 and 6 see Figs. 5 and 6 Tamb = −40 to +125 °C VT+ VT- VH 2003 Nov 04 positive going threshold voltage negative going threshold voltage hysteresis voltage (VT+ − VT-) see Figs. 5 and 6 see Figs. 5 and 6 see Figs. 5 and 6 9 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 Type 74HCT3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL MIN. TYP. MAX. PARAMETER UNIT VCC (V) OTHER Tamb = 25 °C positive going threshold voltage see Figs. 5 and 6 VT- negative going threshold voltage see Figs. 5 and 6 VH hysteresis voltage (VT+ − VT-) see Figs. 5 and 6 VT+ 4.5 1.2 1.58 1.9 V 5.5 1.4 1.78 2.1 V 4.5 0.5 0.87 1.2 V 5.5 0.6 1.11 1.4 V 4.5 0.4 0.71 − V 5.5 0.4 0.67 − V 4.5 1.2 − 1.9 V 5.5 1.4 − 2.1 V Tamb = −40 to +85 °C VT+ VTVH positive going threshold voltage see Figs. 5 and 6 negative going threshold voltage see Figs. 5 and 6 hysteresis voltage (VT+ − VT-) see Figs. 5 and 6 4.5 0.5 − 1.2 V 5.5 0.6 − 1.4 V 4.5 0.4 − − V 5.5 0.4 − − V 4.5 1.2 − 1.9 V 5.5 1.4 − 2.1 V Tamb = −40 to +125 °C VT+ VTVH 2003 Nov 04 positive going threshold voltage see Figs. 5 and 6 negative going threshold voltage see Figs. 5 and 6 hysteresis voltage (VT+ − VT-) see Figs. 5 and 6 10 4.5 0.5 − 1.2 V 5.5 0.6 − 1.4 V 4.5 0.4 − − V 5.5 0.4 − − V Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 TRANSFER CHARACTERISTIC WAVEFORMS handbook, halfpage handbook, halfpage VO VI VT+ VH VT− VO MNA027 VH VT− VI VT+ MNA026 VT+ and VT- are between limits of 20% and 70%. Fig.5 Transfer characteristic. Fig.6 The definitions of VT+, VT− and VH. MNA028 100 MNA029 1.0 handbook, halfpage handbook, halfpage ICC (mA) ICC (µA) 0.8 0.6 50 0.4 0.2 0 0 0 1.0 VI (V) 2.0 0 VCC = 2.0 V. VI (V) 5.0 VCC = 4.5 V. Fig.7 Typical HC3G transfer characteristics. 2003 Nov 04 2.5 Fig.8 Typical HC3G transfer characteristics. 11 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 MNA030 1.6 MNA031 2.0 handbook, halfpage handbook, halfpage ICC (mA) ICC (mA) 1.0 0.8 0 0 0 3.0 VI (V) 6.0 0 VCC = 6.0 V. 5.0 Fig.10 Typical HCT3G transfer characteristics. MNA032 3.0 handbook, halfpage ICC (mA) 2.0 1.0 0 3.0 VI (V) 6.0 VCC = 5.5 V. Fig.11 Typical HCT3G transfer characteristics. 2003 Nov 04 VI (V) VCC = 4.5 V. Fig.9 Typical HC3G transfer characteristics. 0 2.5 12 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 AC CHARACTERISTICS Type 74HC3G14 GND = 0 V; tr = tf ≤ 6.0 ns; CL = 50 pF. TEST CONDITIONS SYMBOL PARAMETER WAVEFORMS MIN. TYP. MAX. UNIT 2.0 − 53 125 ns 4.5 − 16 25 ns 6.0 − 13 21 ns 2.0 − 20 75 ns 4.5 − 7 15 ns 6.0 − 5 13 ns 2.0 − − 155 ns VCC (V) Tamb = 125 °C tPHL/tPLH tTHL/tTLH propagation delay nA to nY see Figs 12 and 13 output transition time see Figs 12 and 13 Tamb = −40 to +85 °C tPHL/tPLH tTHL/tTLH propagation delay nA to nY see Figs 12 and 13 output transition time see Figs 12 and 13 4.5 − − 31 ns 6.0 − − 26 ns 2.0 − − 95 ns 4.5 − − 19 ns 6.0 − − 16 ns 2.0 − − 190 ns Tamb = −40 to +125 °C tPHL/tPLH tTHL/tTLH 2003 Nov 04 propagation delay nA to nY see Figs 12 and 13 output transition time see Figs 12 and 13 13 4.5 − − 38 ns 6.0 − − 32 ns 2.0 − − 110 ns 4.5 − − 22 ns 6.0 − − 19 ns Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 Type 74HCT3G14 GND = 0 V; tr = tf ≤ 6.0 ns; CL = 50 pF. TEST CONDITIONS SYMBOL PARAMETER WAVEFORMS MIN. TYP. MAX. UNIT VCC (V) Tamb = 25 °C tPHL/tPLH propagation delay nA to nY see Figs 12 and 13 4.5 − 21 32 ns tTHL/tTLH output transition time see Figs 12 and 13 4.5 − 6 15 ns tPHL/tPLH propagation delay nA to nY see Figs 12 and 13 4.5 − − 40 ns tTHL/tTLH output transition time see Figs 12 and 13 4.5 − − 19 ns tPHL/tPLH propagation delay nA to nY see Figs 12 and 13 4.5 − − 48 ns tTHL/tTLH output transition time 4.5 − − 22 ns Tamb = −40 to +85 °C Tamb = −40 to +125 °C see Figs 12 and 13 AC WAVEFORMS VI handbook, halfpage nA input VM VM GND t PHL t PLH VOH nY output 90% VM VM 10% VOL t THL t TLH MNA722 For HC3G: VM = 50%; VI = GND to VCC. For HCT3G: VM = 1.3 V; VI = GND to 3.0 V. Fig.12 The input (nA) to output (nY) propagation delays and output transition times. 2003 Nov 04 14 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 S1 handbook, full pagewidth VCC PULSE GENERATOR RL = VI VCC open GND 1 kΩ VO D.U.T. CL = 50 pF RT MNA742 TEST S1 tPLH/tPHL open tPLZ/tPZL VCC tPHZ/tPZH GND Definitions for test circuit: CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to the output impedance Zo of the pulse generator. Fig.13 Load circuitry for switching times. 2003 Nov 04 15 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 APPLICATION INFORMATION Power dissipation The slow input rise and fall times cause additional power dissipation. This can be calculated using the following formula: MNA036 200 handbook, halfpage ICC(AV) (µA) Pad = fi × (tr × ICC(AV) + tf × ICC(AV)) × VCC 150 Where: positive-going edge Pad = additional power dissipation (µW) 100 fi = input frequency (MHz) tr = input rise time between 10% and 90% (ns); tf = input fall time between 90% and 10% (ns); 50 ICC(AV) = average additional supply current (µA). Average ICC(AV) differs with positive or negative input transitions, as shown in Fig.14 and Fig.15. negative-going edge 0 0 2.0 4.0 Relaxation oscillator VCC (V) 6.0 A relaxation oscillator circuit using the HC3G14/HCT3G14 is shown in Fig.16. Remark to the application information Linear change of VI between 0.1VCC to 0.9VCC. All values given are typical unless otherwise specified. Fig.14 Average ICC for HC Schmitt-trigger devices. MNA058 200 handbook, halfpage ICC(AV) (µA) R handbook, halfpage 150 positive-going edge C 100 MNA035 negative-going edge 50 0 0 2 4 VCC (V) 6 1 1 For HC3G: f = --- ≈ ----------------------T 0.8 × RC Linear change of VI between 0.1VCC to 0.9VCC. 1 1 For HCT3G: f = --- ≈ --------------------------T 0.67 × RC Fig.15 Average ICC for HCT Schmitt-trigger devices. Fig.16 Relaxation oscillator using the HC3G/HCT3G14. 2003 Nov 04 16 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 PACKAGE OUTLINES TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm D E A SOT505-2 X c HE y v M A Z 5 8 A A2 (A3) A1 pin 1 index θ Lp L 1 4 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D(1) E(1) e HE L Lp v w y Z(1) θ mm 1.1 0.15 0.00 0.95 0.75 0.25 0.38 0.22 0.18 0.08 3.1 2.9 3.1 2.9 0.65 4.1 3.9 0.5 0.47 0.33 0.2 0.13 0.1 0.70 0.35 8° 0° Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT505-2 2003 Nov 04 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 02-01-16 --- 17 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm D E SOT765-1 A X c y HE v M A Z 5 8 Q A A2 A1 pin 1 index (A3) θ Lp 1 4 e L detail X w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D(1) E(2) e HE L Lp Q v w y Z(1) θ mm 1 0.15 0.00 0.85 0.60 0.12 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.40 0.15 0.21 0.19 0.2 0.13 0.1 0.4 0.1 8° 0° Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT765-1 2003 Nov 04 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 02-06-07 MO-187 18 Philips Semiconductors Product specification Inverting Schmitt-triggers 74HC3G14; 74HCT3G14 DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Production This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2003 Nov 04 19 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: [email protected]. SCA75 © Koninklijke Philips Electronics N.V. 2003 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613508/02/pp20 Date of release: 2003 Nov 04 Document order number: 9397 750 10569