IRF IRLR8203PBF

PD - 95095A
IRLR8203PbF
IRLU8203PbF
SMPS MOSFET
HEXFET® Power MOSFET
Applications
l High Frequency Isolated DC-DC
Converters with Synchronous Rectification
for Telecom and Industrial Use
l High Frequency Buck Converters for
Computer Processor Power
l Lead-Free
VDSS
RDS(on) max
ID
30V
6.8mΩ
110A„
Benefits
Ultra-Low Gate Impedance
l Very Low RDS(on) at 4.5V VGS
l Fully Characterized Avalanche Voltage
and Current
l
D-Pak
IRLR8203PbF
I-Pak
IRLU8203PbF
Absolute Maximum Ratings
Symbol
VDS
VGS
ID @ TC = 25°C
ID @ TC = 100°C
IDM
PD @TC = 25°C
PD @TC = 100°C
TJ , TSTG
Parameter
Drain-Source Voltage
Gate-to-Source Voltage
Continuous Drain Current, VGS @ 10V
Continuous Drain Current, VGS @ 10V
Pulsed Drain Current
Maximum Power Dissipationƒ
Maximum Power Dissipationƒ
Linear Derating Factor
Junction and Storage Temperature Range
Max.
Units
30
± 20
110 „
76 „
120
140
69
0.92
-55 to + 175
V
V
A
W
W
W/°C
°C
Thermal Resistance
Parameter
RθJC
RθJA
RθJA
Junction-to-Case
Junction-to-Ambient (PCB mount)*
Junction-to-Ambient
Typ.
Max.
Units
–––
–––
–––
1.09
50
110
°C/W
* When mounted on 1" square PCB (FR-4 or G-10 Material) .
For recommended footprint and soldering techniques refer to application note #AN-994
Notes  through „ are on page 10
www.irf.com
1
12/06/04
IRLR/U8203PbF
Static @ TJ = 25°C (unless otherwise specified)
Parameter
Drain-to-Source Breakdown Voltage
∆V(BR)DSS/∆TJ Breakdown Voltage Temp. Coefficient
V(BR)DSS
RDS(on)
VGS(th)
IDSS
IGSS
Min. Typ. Max. Units
Conditions
30
––– –––
V
VGS = 0V, ID = 250µA
––– 0.027 ––– V/°C Reference to 25°C, ID = 1mA
–––
5.6
6.8
VGS = 10V, ID = 15A ƒ
mΩ
Static Drain-to-Source On-Resistance
–––
7.1
9.0
VGS = 4.5V, ID = 12A ƒ
Gate Threshold Voltage
1.0
––– 3.0
V
VDS = VGS, ID = 250µA
––– ––– 20
VDS = 24V, VGS = 0V
µA
Drain-to-Source Leakage Current
––– ––– 100
VDS = 24V, VGS = 0V, TJ = 125°C
Gate-to-Source Forward Leakage
––– ––– 200
VGS = 20V
nA
Gate-to-Source Reverse Leakage
––– ––– -200
VGS = -20V
Dynamic @ TJ = 25°C (unless otherwise specified)
Symbol
gfs
Qg
Qgs
Qgd
Qoss
td(on)
tr
td(off)
tf
Ciss
Coss
Crss
Parameter
Forward Transconductance
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Output Gate Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Min.
35
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
Typ.
–––
33
5.7
17
23
15
99
30
69
2430
1200
250
Max. Units
Conditions
–––
S
VDS = 15V, ID = 12A
50
ID = 12A
8.5
nC
VDS = 24V
25
VGS = 4.5V ƒ
34
VGS = 0V, VDS = 10V
–––
VDD = 15V
–––
ID = 12A
ns
–––
R G = 6.8Ω
–––
VGS = 4.5V ƒ
–––
VGS = 0V
–––
VDS = 15V
–––
pF
ƒ = 1.0MHz
Avalanche Characteristics
Symbol
EAS
IAR
Parameter
Single Pulse Avalanche Energy‚
Avalanche Current
Typ.
Max.
Units
–––
–––
310
30
mJ
A
Diode Characteristics
Symbol
IS
ISM
Parameter
Continuous Source Current
(Body Diode)
Pulsed Source Current
(Body Diode) 
VSD
Diode Forward Voltage
trr
Qrr
trr
Qrr
Reverse
Reverse
Reverse
Reverse
2
Recovery
Recovery
Recovery
Recovery
Time
Charge
Time
Charge
Min. Typ. Max. Units
–––
––– 110„
–––
–––
120
–––
–––
–––
–––
–––
–––
0.75
0.65
48
62
49
67
1.3
–––
72
92
74
100
A
V
ns
nC
ns
nC
Conditions
D
MOSFET symbol
showing the
G
integral reverse
S
p-n junction diode.
TJ = 25°C, IS = 12A, VGS = 0V ƒ
TJ = 125°C, IS = 12A, VGS = 0V ƒ
TJ = 25°C, IF = 12A, VR=15V
di/dt = 100A/µs ƒ
TJ = 125°C, IF = 12A, VR=15V
di/dt = 100A/µs ƒ
www.irf.com
IRLR/U8203PbF
1000
1000
VGS
10V
4.5V
3.7V
3.5V
3.3V
3.0V
2.7V
BOTTOM 2.5V
100
VGS
10V
4.5V
3.7V
3.5V
3.3V
3.0V
2.7V
BOTTOM 2.5V
TOP
ID, Drain-to-Source Current (A)
ID, Drain-to-Source Current (A)
TOP
2.5V
10
20µs PULSE WIDTH
Tj = 25°C
100
2.5V
10
20µs PULSE WIDTH
Tj = 175°C
1
1
0.1
1
10
100
0.1
1
VDS, Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
100
Fig 2. Typical Output Characteristics
1000.00
2.0
ID, Drain-to-Source Current (Α)
10
VDS, Drain-to-Source Voltage (V)
I D = 30A
T J = 175°C
VDS = 15V
20µs PULSE WIDTH
10.00
2.0
3.0
4.0
VGS, Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
www.irf.com
5.0
(Normalized)
T J = 25°C
100.00
RDS(on) , Drain-to-Source On Resistance
1.5
1.0
0.5
V GS = 10V
0.0
-60
-40
-20
0
20
40
60
80
TJ, Junction Temperature
100 120 140 160 180
( ° C)
Fig 4. Normalized On-Resistance
Vs. Temperature
3
IRLR/U8203PbF
10000
6
VGS = 0V,
f = 1 MHZ
Ciss = Cgs + Cgd, Cds SHORTED
Crss = Cgd
I D = 12A
VDS = 24V
VDS = 15V
5
VDS = 6V
Ciss
VGS , Gate-to-Source Voltage (V)
C, Capacitance(pF)
Coss = Cds + Cgd
Coss
1000
Crss
4
3
2
1
100
1
10
0
100
0
10
40
1000
ID, Drain-to-Source Current (A)
1000
100
I SD , Reverse Drain Current (A)
30
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
OPERATION IN THIS AREA
LIMITED BY R DS(on)
100
TJ = 175 ° C
10
TJ = 25 ° C
1
V GS = 0 V
0.1
0.2
0.4
0.6
0.8
1.0
1.2
V SD,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
4
20
QG, Total Gate Charge (nC)
VDS, Drain-to-Source Voltage (V)
100µsec
1msec
10
1
1.4
10msec
Tc = 25°C
Tj = 175°C
Single Pulse
0
1
10
100
1000
VDS , Drain-toSource Voltage (V)
Fig 8. Maximum Safe Operating Area
www.irf.com
IRLR/U8203PbF
120
RD
V DS
LIMITED BY PACKAGE
VGS
100
D.U.T.
RG
+
-VDD
ID , Drain Current (A)
80
4.5V
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
60
Fig 10a. Switching Time Test Circuit
40
VDS
20
90%
0
25
50
75
100
125
TC , Case Temperature
150
175
( ° C)
10%
VGS
Fig 9. Maximum Drain Current Vs.
Case Temperature
td(on)
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
(Z thJC )
10
1
Thermal Response
D = 0.50
0.20
P DM
0.10
0.1
0.05
0.02
0.01
t1
SINGLE PULSE
(THERMAL RESPONSE)
t2
Notes:
1. Duty factor D =
2. Peak T
0.01
0.00001
0.0001
0.001
0.01
t1 / t 2
J = P DM x Z thJC
+TC
0.1
1
t 1, Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
www.irf.com
5
IRLR/U8203PbF
800
15V
ID
12A
21A
30A
TOP
+
V
- DD
IAS
20V
tp
A
0.01Ω
Fig 12a. Unclamped Inductive Test Circuit
V(BR)DSS
tp
EAS , Single Pulse Avalanche Energy (mJ)
D.U.T
RG
BOTTOM
DRIVER
L
VDS
600
400
200
0
25
50
75
100
Starting Tj, Junction Temperature
125
150
175
( ° C)
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
I AS
Fig 12b. Unclamped Inductive Waveforms
Current Regulator
Same Type as D.U.T.
QG
4.5 V
50KΩ
12V
QGS
.2µF
.3µF
QGD
D.U.T.
VG
+
V
- DS
VGS
3mA
Charge
Fig 13a. Basic Gate Charge Waveform
6
IG
ID
Current Sampling Resistors
Fig 13b. Gate Charge Test Circuit
www.irf.com
IRLR/U8203PbF
Peak Diode Recovery dv/dt Test Circuit
+
D.U.T
Circuit Layout Considerations
• Low Stray Inductance
• Ground Plane
• Low Leakage Inductance
Current Transformer
ƒ
+
‚
-
-
„
+

RG
•
•
•
•
Driver Gate Drive
P.W.
+
dv/dt controlled by RG
Driver same type as D.U.T.
ISD controlled by Duty Factor "D"
D.U.T. - Device Under Test
Period
D=
-
VDD
P.W.
Period
VGS=10V
*
D.U.T. ISD Waveform
Reverse
Recovery
Current
Body Diode Forward
Current
di/dt
D.U.T. VDS Waveform
Diode Recovery
dv/dt
Re-Applied
Voltage
Body Diode
VDD
Forward Drop
Inductor Curent
Ripple ≤ 5%
ISD
* VGS = 5V for Logic Level Devices
Fig 14. For N-Channel HEXFET® Power MOSFETs
www.irf.com
7
IRLR/U8203PbF
D-Pak (TO-252AA) Package Outline
Dimensions are shown in millimeters (inches)
D-Pak (TO-252AA) Part Marking Information
EXAMPLE: T HIS IS AN IRFR120
WITH AS S EMBLY
LOT CODE 1234
AS S EMBLED ON WW 16, 1999
IN THE AS S EMBLY LINE "A"
PART NUMBER
INTERNATIONAL
RECTIFIER
LOGO
Note: "P" in as sembly line pos ition
indicates "Lead-Free"
IRFU120
12
916A
34
AS S EMBLY
LOT CODE
DAT E CODE
YEAR 9 = 1999
WEEK 16
LINE A
OR
INT ERNAT IONAL
RECT IFIER
LOGO
PART NUMBER
IRFU120
12
AS S EMBLY
LOT CODE
8
34
DATE CODE
P = DES IGNAT ES LEAD-FREE
PRODUCT (OPT IONAL)
YEAR 9 = 1999
WEEK 16
A = AS S EMBLY S ITE CODE
www.irf.com
IRLR/U8203PbF
I-Pak (TO-251AA) Package Outline
Dimensions are shown in millimeters (inches)
I-Pak (TO-251AA) Part Marking Information
EXAMPLE: T HIS IS AN IRFU120
WIT H AS S EMBLY
LOT CODE 5678
AS S EMBLED ON WW 19, 1999
IN T HE AS S EMBLY LINE "A"
INT ERNAT IONAL
RECT IFIER
LOGO
PART NUMBER
IRF U120
919A
56
78
AS S EMBLY
LOT CODE
Note: "P" in assembly line
position indicates "Lead-Free"
DAT E CODE
YEAR 9 = 1999
WEEK 19
LINE A
OR
INT ERNAT IONAL
RECT IFIER
LOGO
PART NUMBER
IRFU120
56
AS S EMBLY
LOT CODE
www.irf.com
78
DAT E CODE
P = DES IGNAT ES LEAD-FREE
PRODUCT (OPTIONAL)
YEAR 9 = 1999
WEEK 19
A = AS S EMBLY S IT E CODE
9
IRLR/U8203PbF
D-Pak (TO-252AA) Tape & Reel Information
Dimensions are shown in millimeters (inches)
TR
TRR
16.3 ( .641 )
15.7 ( .619 )
12.1 ( .476 )
11.9 ( .469 )
FEED DIRECTION
TRL
16.3 ( .641 )
15.7 ( .619 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
13 INCH
16 mm
NOTES :
1. OUTLINE CONFORMS TO EIA-481.
Notes:
 Repetitive rating; pulse width limited by
max. junction temperature.
‚ Starting TJ = 25°C, L = 0.68mH
RG = 25Ω, IAS = 30A.
ƒ Pulse width ≤ 400µs; duty cycle ≤ 2%.
„Calculated continuous current based on maximum allowable
junction temperature. Package limitation current is 30A.
Data and specifications subject to change without notice.
This product has been designed and qualified for the Industrial market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.12/04
10
www.irf.com