NTGD4161P Power MOSFET −30 V, −2.3 A, Dual P−Channel, TSOP−6 Features • • • • • Fast Switching Speed Low Gate Charge Low RDS(on) Independently Connected Devices to Provide Design Flexibility This is a Pb−Free Device http://onsemi.com V(BR)DSS RDS(on) Max 160 mW @ −10 V Applications • Load Switch • Battery Protection • Portable Devices Like PDAs, Cellular Phones and Hard Drives −30 V 280 mW @ −4.5 V P−Channel (MOSFET1) D1 MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Parameter Symbol Value Unit Drain−to−Source Voltage VDSS −30 V Gate−to−Source Voltage VGS ±20 V ID −2.1 A Continuous Drain Current (Note 1) Power Dissipation (Note 1) Steady State TA = 25°C t≤5s TA = 25°C Steady State TA = 25°C TA = 85°C Steady State Power Dissipation (Note 2) Pulsed Drain Current G1 G2 −2.3 PD S1 W 1.1 ID TA = 85°C TA = 25°C tp = 10 ms 1 0.6 W IDM −10 A TJ, TSTG −55 to 150 °C Source Current (Body Diode) IS −0.8 A Lead Temperature for Soldering Purposes (1/8” from case for 10 s) TL 260 °C Operating Junction and Storage Temperature D1 S1 D2 A −1.5 −1.1 PD S2 MARKING DIAGRAM 1.3 TA = 25°C D2 −1.5 t≤5s Continuous Drain Current (Note 2) P−Channel (MOSFET2) S8 MG G TSOP−6 CASE 318G STYLE 13 S8 M G G1 S2 G2 = Specific Device Code = Date Code* = Pb−Free Package (Note: Microdot may be in either location) THERMAL RESISTANCE RATINGS Parameter Junction−to−Ambient − Steady State (Note 1) Symbol Max Unit RqJA 115 °C/W *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION Junction−to−Ambient − Steady State (Note 2) 225 Junction−to−Ambient − t ≤ 5 s (Note 1) 95 Device Package Shipping † 40 NTGD4161PT1G TSOP−6 (Pb−Free) 3000 / Tape & Reel Junction−to−Case − Steady State (Note 1) RqJC Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. When surface mounted to an FR4 board using 1 in. pad size (Cu. area = 1.2 in2 [1 oz] including traces) 2. When surface mounted to an FR4 board using minimum recommended pad size (Cu. area = 0.047 in2) © Semiconductor Components Industries, LLC, 2006 September, 2006 − Rev. 1 1 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: NTGD4161P/D NTGD4161P ELECTRICAL CHARACTERISTICS (TJ=25°C unless otherwise stated) Parameter Symbol Test Condition Min Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = −250 mA −30 Drain−to−Source Breakdown Voltage Temperature Coefficient V(BR)DSS/TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS 22 VGS = 0 V, VDS = −24 V mV/°C TJ = 25°C −1.0 TJ = 125°C −10 IGSS VDS = 0 V, VGS = ±20 V VGS(TH) VGS = VDS, ID = −250 mA Gate−to−Source Leakage Current V mA ±100 nA −3.0 V ON CHARACTERISTICS (Note 3) Gate Threshold Voltage Gate Threshold Temperature Coefficient Drain−to−Source On Resistance VGS(TH)/TJ RDS(on) Forward Transconductance gFS −1.0 −1.9 −4.7 mV/°C VGS = −10 V, ID = −2.1 A 105 160 VGS = −4.5 V, ID = −1.6 A 190 280 VDS = −5.0 V, ID = −2.1 A 2.7 S 281 pF mΩ CHARGES AND CAPACITANCES Input Capacitance CISS VDS = −15 V, f = 1.0 MHz, VGS = 0 V Output Capacitance COSS 50 Reverse Transfer Capacitance CRSS 28 Total Gate Charge QG(TOT) 5.6 Threshold Gate Charge QG(TH) Gate−to−Source Charge QGS Gate−to−Drain Charge QGD 0.90 td(on) 7.1 nC 7.6 14 ns 9.2 23 12.5 20 4.5 12 TJ = 25°C −0.79 −1.2 TJ = 125°C −0.65 VGS = −10 V, VDS = −5.0 V, ID = −2.1A 0.65 1.2 SWITCHING CHARACTERISTICS (Note 4) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time tr td(off) VGS = −4.5 V, VDD = −15 V, ID = −1.0 A, RG = 6.0 Ω tf DRAIN−SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time VSD tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = −0.8 A V 8.0 VGS = 0 V, dIS/dt = 100 A/ms, IS = −0.8 A QRR 5.7 3 3. Pulse Test: pulse width ≤ 300 ms, duty cycle ≤ 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 ns 2.3 nC NTGD4161P TYPICAL PERFORMANCE CURVES −10 V −4.5 V 5 TJ = 25°C 4 −ID, DRAIN CURRENT (A) −ID, DRAIN CURRENT (A) 5 −4 V 3 −3.8 V −3.6 V 2 −3.4 V −3.2 V 1 0 −3 V −2.8 V 0 1 2 3 4 −VDS, DRAIN−TO−SOURCE VOLTAGE (V) VDS ≥ −3 V 4 3 2 150°C 1 25°C −40°C 0 5 1 2 3 4 −VGS, GATE−TO−SOURCE VOLTAGE (V) Figure 2. Transfer Characteristics 0.5 ID = −2.1 A 0.4 0.3 TJ = 125°C 0.2 TJ = 25°C 0.1 0 3 4 5 6 7 8 9 10 −VGS, GATE−TO−SOURCE VOLTAGE (V) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) Figure 1. On−Region Characteristics 0.4 TJ = 25°C 0.35 0.3 VGS = −4.5 V 0.25 0.2 0.15 0.1 VGS = −10 V 0.05 0 0 1 2 3 4 5 6 −ID, DRAIN CURRENT (A) Figure 3. On−Resistance versus Gate−to−Source Voltage Figure 4. On−Resistance versus Drain Current and Temperature 0.3 1000 VGS = 0 V ID = −1.6 A VGS = −4.5 V 0.2 ID = −2.1 A VGS = −10 V 0.1 0.0 −50 −IDSS, LEAKAGE(nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE 5 TJ = 150°C 100 TJ = 125°C 10 −25 0 25 50 75 100 125 150 0 TJ, JUNCTION TEMPERATURE (°C) 5 10 15 20 25 −VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 5. On−Resistance Variation with Temperature Figure 6. On−Resistance Variation with Temperature http://onsemi.com 3 30 NTGD4161P TYPICAL PERFORMANCE CURVES 250 CISS −VGS, GATE−TO−SOURCE VOLTAGE (V) C, CAPACITANCE (pF) 300 TJ = 25°C VGS = 0 V 200 150 100 COSS 50 CRSS 0 0 5 10 15 20 25 10 10 QT 8 8 VGS 6 6 QGS 4 QGD 2 2 ID = −2.1 A TJ = 25°C VDS 0 0 30 1 DRAIN−TO−SOURCE VOLTAGE (V) 2 3 4 0 6 5 QG, TOTAL GATE CHARGE (nC) Figure 7. Capacitance Variation Figure 8. Gate−to−Source and Drain−to−Source Voltage versus Total Charge 100 0.8 VGS = −10 V Single Pulse TA = 25°C VGS = 0 V 0.7 −ID, DRAIN CURRENT (A) −IS, SOURCE CURRENT (A) 4 −VDS, DRAIN−TO−SOURCE VOLTAGE (V) 350 0.6 0.5 TJ = 150°C 0.4 0.3 TJ = 125°C 0.2 10 100 ms 1 ms 1 10 ms 0.1 RDS(on) Limit Thermal Limit Package Limit TJ = 25°C 0.1 0 0.3 TJ = −40°C 0.4 0.5 0.6 0.7 0.8 0.9 dc 0.01 1.0 0.1 1 10 100 −VSD, SOURCE−TO−DRAIN VOLTAGE (V) −VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 9. Diode Forward Voltage versus Current Figure 10. Maximum Rated Forward Biased Safe Operating Area RqJA, EFFECTIVE TRANSIENT THERMAL RESPONSE (NORMALIZED) 1.0 0.5 0.2 0.1 0.1 0.05 0.02 0.01 0.01 0.001 1E−06 Single Pulse 1E−05 1E−04 1E−03 1E−02 1E−01 t, time (s) Figure 11. FET Thermal Response http://onsemi.com 4 1E+00 1E+01 1E+02 1E+03 NTGD4161P PACKAGE DIMENSIONS TSOP−6 CASE 318G−02 ISSUE S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. D 6 HE 1 5 4 2 3 E b e q c A 0.05 (0.002) L A1 SOLDERING FOOTPRINT* DIM A A1 b c D E e L HE q MIN 0.90 0.01 0.25 0.10 2.90 1.30 0.85 0.20 2.50 0° MILLIMETERS NOM MAX 1.00 1.10 0.06 0.10 0.38 0.50 0.18 0.26 3.00 3.10 1.50 1.70 0.95 1.05 0.40 0.60 2.75 3.00 10° − MIN 0.035 0.001 0.010 0.004 0.114 0.051 0.034 0.008 0.099 0° INCHES NOM 0.039 0.002 0.014 0.007 0.118 0.059 0.037 0.016 0.108 − MAX 0.043 0.004 0.020 0.010 0.122 0.067 0.041 0.024 0.118 10° STYLE 13: PIN 1. GATE 1 2. SOURCE 2 3. GATE 2 4. DRAIN 2 5. SOURCE 1 6. DRAIN 1 2.4 0.094 1.9 0.075 0.95 0.037 0.95 0.037 0.7 0.028 1.0 0.039 SCALE 10:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTGD4161P/D