HEF4538B Dual precision monostable multivibrator Rev. 06 — 2 November 2009 Product data sheet 1. General description The HEF4538B is a dual retriggerable-resettable monostable multivibrator. Each multivibrator has an active LOW trigger/retrigger input (nA), an active HIGH trigger/retrigger input (nB), an overriding active LOW direct reset input (nCD), an output (nQ) and its complement (nQ), and two pins (nREXT/CEXT, and nCEXT, always connected to ground) for connecting the external timing components CEXT and REXT. Typical pulse width variation over the specified temperature range is ±0.2 %. The multivibrator may be triggered by either the positive or the negative edges of the input pulse and will produce an accurate output pulse with a pulse width range of 10 µs to infinity. The duration and accuracy of the output pulse are determined by the external timing components CEXT and REXT. The output pulse width (tW) is equal to REXT × CEXT. The linear design techniques in LOCMOS (Local Oxide CMOS) guarantee precise control of the output pulse width. A LOW level at nCD terminates the output pulse immediately. The trigger inputs’ Schmitt trigger action makes the circuit highly tolerant of slower rise and fall times. It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input. It is also suitable for use over the industrial (−40 °C to +85 °C) and automotive (−40 °C to +125 °C) temperature ranges. 2. Features n n n n n n Tolerant of slow trigger rise and fall times Fully static operation 5 V, 10 V, and 15 V parametric ratings Standardized symmetrical output characteristics Operates across the automotive temperature range −40 °C to +125 °C Complies with JEDEC standard JESD 13-B 3. Applications n Automotive and industrial HEF4538B NXP Semiconductors Dual precision monostable multivibrator 4. Ordering information Table 1. Ordering information All types operate from −40 °C to +125 °C. Type number Package Name Description Version HEF4538BP DIP16 plastic dual in-line package; 16 leads (300 mil) SOT38-4 HEF4538BT SO16 plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 5. Functional diagram 2 1REXT/CEXT 1 1CEXT 5 1A 4 1B 3 6 1Q 7 2Q 10 2Q 9 1CD 14 2REXT/CEXT 15 2CEXT 11 2A 12 2B 13 1Q 2CD 001aae727 Fig 1. Functional diagram HEF4538B_6 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 2 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator nB nA VDD nREXT/CEXT Vref1 enable nQ nCEXT VSS nCD nQ Vref2 enable 001aae734 Fig 2. Logic diagram (one multivibrator) 6. Pinning information 6.1 Pinning HEF4538B 1CEXT 1 16 VDD 1REXT/CEXT 2 15 2CEXT 1CD 3 14 2REXT/CEXT 1B 4 13 2CD 1A 5 12 2B 1Q 6 11 2A 1Q 7 10 2Q VSS 8 9 2Q 001aae733 Fig 3. Pin configuration HEF4538B_6 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 3 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator 6.2 Pin description Table 2. Pin description Symbol Pin Description 1CEXT, 2CEXT 1, 15 external capacitor connection (always connected to ground) 1REXT/CEXT, 2REXT/CEXT 2, 14 external capacitor/resistor connection 1CD, 2CD 3, 13 direct reset input (active LOW) 1B, 2B 4, 12 input (LOW-to-HIGH triggered) 1A, 2A 5, 11 input (HIGH-to-LOW triggered) 1Q, 2Q 6, 10 output 1Q, 2Q 7, 9 complementary output (active LOW) VSS 8 ground supply voltage VDD 16 supply voltage 7. Functional description Table 3. Function table Inputs Outputs nA nB nCD ↓ L H H ↑ H X X L [1] nQ nQ L H H = HIGH voltage level; L = LOW voltage level; X = don’t care; ↑ = positive-going transition; ↓ = negative-going transition; = one HIGH level output pulse, with the pulse width determined by CEXT and REXT; = one LOW level output pulse, with the pulse width determined by CEXT and REXT. HEF4538B_6 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 4 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator (1) (1) (2) (1) nB input (3) nA input (4) nCD input nREXT/CEXT input Vref2 Vref1 Vref1 Vref2 nQ output T T T (5) 001aae737 (1) Positive edge triggering. (2) Positive edge re-triggering (pulse lengthening). (3) Negative edge triggering. (4) Reset (pulse shortening). (5) T = REXT × CEXT. Fig 4. Timing diagram CEXT REXT VDD nREXT/CEXT nCEXT T nQ T = REXT × CEXT nA nB nQ nCD Fig 5. 001aae735 Connection of the external timing components REXT and CEXT 8. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS = 0 V (ground) Symbol Parameter VDD supply voltage Conditions IIK input clamping current VI input voltage IOK output clamping current - ±10 mA II/O input/output current - ±10 mA IDD supply current - 50 mA Tstg storage temperature −65 −0.5 VI < −0.5 V or VI > VDD + 0.5 V −0.5 VI < −0.5 V or VI > VDD + 0.5 V HEF4538B_6 Product data sheet Min Max Unit +18 V ±10 mA VDD + 0.5 +150 V °C © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 5 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator Table 4. Limiting values …continued In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS = 0 V (ground) Symbol Parameter Tamb ambient temperature Ptot total power dissipation P Conditions Min Max Unit −40 +125 °C Tamb = −40 °C to +125 °C power dissipation DIP16 package [1] - 750 mW SO16 package [2] - 500 mW - 100 mW per output [1] For DIP16 package: Ptot derates linearly with 12 mW/K above 70 °C. [2] For SO16 package: Ptot derates linearly with 8 mW/K above 70 °C. 9. Recommended operating conditions Table 5. Recommended operating conditions Symbol Parameter Min Typ Max Unit VDD supply voltage Conditions 3 - 15 V VI input voltage 0 - VDD V Tamb ambient temperature in free air −40 - +125 °C ∆t/∆V input transition rise and fall rate VDD = 5 V - - 3.75 µs/V VDD = 10 V - - 0.5 µs/V VDD = 15 V - - 0.08 µs/V 10. Static characteristics Table 6. Static characteristics VSS = 0 V; VI = VSS or VDD unless otherwise specified. Symbol Parameter VIH VIL VOH VOL HIGH-level input voltage LOW-level input voltage HIGH-level output voltage LOW-level output voltage Conditions |IO| < 1 µA |IO| < 1 µA |IO| < 1 µA |IO| < 1 µA VDD Tamb = −40 °C Tamb = 25 °C Min Max Min Max Min Max Min Max 5V 3.5 - 3.5 - 3.5 - 3.5 - V 10 V 7.0 - 7.0 - 7.0 - 7.0 - V 15 V 11.0 - 11.0 - 11.0 - 11.0 - V 5V - 1.5 - 1.5 - 1.5 - 1.5 V 10 V - 3.0 - 3.0 - 3.0 - 3.0 V 15 V - 4.0 - 4.0 - 4.0 - 4.0 V 5V 4.95 - 4.95 - 4.95 - 4.95 - V 10 V 9.95 - 9.95 - 9.95 - 9.95 - V 15 V 14.95 - 14.95 - 14.95 - 14.95 - V 5V - 0.05 - 0.05 - 0.05 - 0.05 V 10 V - 0.05 - 0.05 - 0.05 - 0.05 V 15 V - 0.05 - 0.05 - 0.05 - 0.05 V HEF4538B_6 Product data sheet Tamb = 85 °C Tamb = 125 °C Unit © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 6 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator Table 6. Static characteristics …continued VSS = 0 V; VI = VSS or VDD unless otherwise specified. Symbol Parameter IOH HIGH-level output current LOW-level output current IOL II input leakage current CI input capacitance Conditions VDD Tamb = −40 °C Tamb = 25 °C Tamb = 85 °C Tamb = 125 °C Unit Min Max Min Max Min Max Min Max 5V −1.7 - −1.4 - −1.1 - −1.1 - VO = 4.6 V 5V −0.64 - −0.5 - −0.36 - −0.36 - mA VO = 9.5 V 10 V −1.6 - −1.3 - −0.9 - −0.9 - mA VO = 13.5 V 15 V −4.2 - −3.4 - −2.4 - −2.4 - mA VO = 0.4 V 5V 0.64 - 0.5 - 0.36 - 0.36 - mA VO = 0.5 V 10 V 1.6 - 1.3 - 0.9 - 0.9 - mA VO = 1.5 V 15 V 4.2 - 3.4 - 2.4 - 2.4 - mA nREXT/CEXT 15 V - ±0.1 - ±0.1 - ±1.0 - ±1.0 µA - - - - 7.5 - - - - VO = 2.5 V mA pF Table 7. Typical static characteristics VSS = 0 V; VI = VSS or VDD; Tamb = +25 °C. Symbol Parameter Conditions IDD supply current active state input capacitance CI [1] VDD nREXT/CEXT Typ Unit 55 µA 10 V 150 µA 15 V 220 µA - 15 pF 5V [1] Only one monostable is switching: for the specified current during the output pulse (output Q is HIGH). 11. Dynamic characteristics Table 8. Dynamic characteristics VSS = 0 V; Tamb = 25 °C; for test circuit see Figure 11. Symbol Parameter tPHL HIGH to LOW propagation delay Conditions VDD nA, nB to nQ; see Figure 6 nCD to nQ; see Figure 6 tPLH LOW to HIGH propagation delay nA, nB to nQ; see Figure 6 nCD to nQ; see Figure 6 Extrapolation formula[1] Min Max Unit 5V 193 ns + (0.55 ns/pF) CL - 220 440 ns 10 V 74 ns + (0.23 ns/pF) CL - 85 190 ns 15 V 52 ns + (0.16 ns/pF) CL - 60 120 ns 5V 98 ns + (0.55 ns/pF) CL - 125 250 ns 10 V 44 ns + (0.23 ns/pF) CL - 55 110 ns 15 V 32 ns + (0.16 ns/pF) CL - 40 80 ns 5V 173 ns + (0.55 ns/pF) CL - 200 460 ns 10 V 79 ns + (0.23 ns/pF) CL - 90 180 ns 15 V 52 ns + (0.16 ns/pF) CL - 60 120 ns 5V 98 ns + (0.55 ns/pF) CL - 125 250 ns 10 V 44 ns + (0.23 ns/pF) CL - 55 110 ns 15 V 32 ns + (0.16 ns/pF) CL - 40 80 ns HEF4538B_6 Product data sheet Typ © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 7 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator Table 8. Dynamic characteristics …continued VSS = 0 V; Tamb = 25 °C; for test circuit see Figure 11. Symbol Parameter Conditions trec nCD to nA, nB; see Figure 7 recovery time retrigger time trtrig pulse width tW VDD nQ, nQ to nA, nB; see Figure 7 Max Unit 5V - 20 40 ns 10 V - 10 20 ns 15 V - 10 ns 5 0 - - ns 10 V 0 - - ns 15 V 0 - - ns nA LOW; minimum width; 5 V see Figure 7 10 V 90 45 - ns 30 15 - ns 15 V 24 12 - ns 5V 50 25 - ns 10 V 24 12 - ns 15 V 20 10 - ns 5V 55 25 - ns 10 V 25 12 - ns nCD LOW; minimum width; see Figure 7 nQ or nQ; REXT = 100 kΩ; CEXT =2.0 nF; see Figure 7 nQ or nQ ; REXT = 100 kΩ; CEXT = 0.1 µF; see Figure 7 nQ or nQ; REXT = 100 kΩ; CEXT = 10 µF; see Figure 7 pulse width variation Typ 5V nB HIGH; minimum width; see Figure 7 ∆tW Extrapolation formula[1] Min nQ or nQ variation over temperature range; see Figure 8 15 V 20 10 - ns 5V 218 230 242 µs 10 V 213 224 235 µs 15 V 211 223 234 µs 5V 10.3 10.8 11.3 ms 10 V 10.2 10.7 11.2 ms 15 V 10.1 10.6 11.1 ms 5V 1.01 1.09 1.11 ms 10 V 0.99 1.04 1.09 ms 15 V 0.99 1.04 1.09 ms 5V - ±0.2 - % 10 V - ±0.2 - % 15 V - ±0.2 - % - ±1.5 - % 5V - ±1 - % 10 V - ±1 - % 15 V - ±1 - % nQ or nQ variation over VDD voltage range 5 V to 15 V; see Figure 9 nQ or nQ variation between monostables in the same device; REXT = 100 kΩ; CEXT = 2 nF to 10 µF REXT external timing resistor 5 - [2] kΩ CEXT external timing capacitor 2000 - no limits pF [1] The typical values of the propagation delay and transition times are calculated from the extrapolation formulas shown (CL in pF). [2] The maximum permissible resistance REXT, which holds the specified accuracy of tW (nQ, nQ output), depends on the leakage current of the capacitor CEXT and the leakage of the HEF4538B. HEF4538B_6 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 8 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator 12. Waveforms tr VI tf 90 % VM nB input 10 % 0V tW tr tf VI 90 % nA input 10 % 0V VM tW VI VM nCD input 0V tPLH tPLH tPHL VOH nQ output VM VM VOL tPHL tPHL tPLH VOH nQ output VM VOL 001aae736 Measurement points are given in Table 9. Logic levels: VOL and VOH are typical output levels that occur with the output load. Fig 6. Waveforms showing propagation delays Table 9. Measurement points Supply voltage Input Output VDD VM VM 5 V to 15 V 0.5VDD 0.5VDD HEF4538B_6 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 9 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator VI nCD input VM 0V tW trec tW VI nA input VM 0V tsu tW VI nB input VM 0V tsu tretrig VOH nQ output VM VOL tW 001aaj491 Measurement points are given in Table 9. Set-up and recovery times are shown as positive values but may be specified as negative values. Logic levels: VOL and VOH are typical output levels that occur with the output load. Fig 7. Waveforms showing minimum nA, nB, and nQ pulse widths and set-up, recovery and retrigger times HEF4538B_6 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 10 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator 001aae738 3 ∆tW (%) 001aae739 3 ∆tW (%) 2 (1) 2 (1) 1 1 (2) (2) 0 0 (3) (3) −1 −1 −2 −80 −40 0 40 80 100 Tamb (°C) a. REXT = 100 kΩ; CEXT = 100 nF −2 −80 −40 0 40 80 100 Tamb (°C) b. REXT = 100 kΩ; CEXT = 2 nF (1) VDD = 5 V. (2) VDD = 10 V. (3) VDD = 15 V. ∆tW = 0 % at VDD = 10 V and Tamb = 25 °C Fig 8. Typical normalized change in output pulse width as a function of ambient temperature 001aae740 3 001aae741 103 (1) ∆tW (%) IDD (µA) 2 102 (2) 1 (1) 10 (2) 0 (3) 1 −1 −2 0 4 8 12 16 10−1 10−2 10−1 VDD (V) Tamb = 25 °C; ∆tW = 0 % at VDD = 10 V; REXT = 100 kΩ (1) CEXT = 2 nF. 1 10 δ (%) 102 REXT = 100 kΩ; CEXT = 100 nF; CL = 50 pF; one monostable multivibrator switching only (1) VDD = 15 V. (2) CEXT = 100 nF. (2) VDD = 10 V. (3) VDD = 5 V. Fig 9. Typical normalized change in output pulse width as a function of the supply voltage Fig 10. Total supply current as a function of the output duty factor HEF4538B_6 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 11 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator VDD VI VO G DUT CL RT 001aag182 Test data is given in Table 10. Definitions for test circuit: CL = load capacitance including jig and probe capacitance. RT = termination resistance should be equal to the output impedance Zo of the pulse generator. Fig 11. Test circuit Table 10. Test data Supply voltage Input Load VDD VI tr, tf CL 5 V to 15 V VSS or VDD ≤ 20 ns 50 pF HEF4538B_6 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 12 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator 13. Package outline DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-4 ME seating plane D A2 A A1 L c e Z w M b1 (e 1) b b2 MH 9 16 pin 1 index E 1 8 0 5 10 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 min. A2 max. b b1 b2 c D (1) E (1) e e1 L ME MH w Z (1) max. mm 4.2 0.51 3.2 1.73 1.30 0.53 0.38 1.25 0.85 0.36 0.23 19.50 18.55 6.48 6.20 2.54 7.62 3.60 3.05 8.25 7.80 10.0 8.3 0.254 0.76 inches 0.17 0.02 0.13 0.068 0.051 0.021 0.015 0.049 0.033 0.014 0.009 0.77 0.73 0.26 0.24 0.1 0.3 0.14 0.12 0.32 0.31 0.39 0.33 0.01 0.03 Note 1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included. OUTLINE VERSION REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 95-01-14 03-02-13 SOT38-4 Fig 12. Package outline SOT38-4 (DIP16) HEF4538B_6 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 13 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 D E A X c y HE v M A Z 16 9 Q A2 A (A 3) A1 pin 1 index θ Lp 1 L 8 e 0 detail X w M bp 2.5 5 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) mm 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 10.0 9.8 4.0 3.8 1.27 6.2 5.8 1.05 1.0 0.4 0.7 0.6 0.25 0.25 0.1 0.7 0.3 0.01 0.019 0.0100 0.39 0.014 0.0075 0.38 0.039 0.016 0.028 0.020 inches 0.010 0.057 0.069 0.004 0.049 0.16 0.15 0.05 0.244 0.041 0.228 0.01 0.01 0.028 0.004 0.012 θ o 8 o 0 Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC SOT109-1 076E07 MS-012 JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 Fig 13. Package outline SOT109-1 (SO16) HEF4538B_6 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 14 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator 14. Abbreviations Table 11. Abbreviations Acronym Description DUT Device Under Test 15. Revision history Table 12. Revision history Document ID Release date Data sheet status Change notice Supersedes HEF4538B_6 20091102 Product data sheet - HEF4538B_5 Modifications: • • • Section 2 “Features” ESD values removed. Section 9 “Recommended operating conditions” ∆t/∆V values updated. Section 14 “Abbreviations” ESD values removed. HEF4538B_5 20090304 Product data sheet - HEF4538B_4 HEF4538B_4 20090206 Product data sheet - HEF4538B_CNV_3 HEF4538B_CNV_3 19950101 Product specification - HEF4538B_CNV_2 HEF4538B_CNV_2 19950101 Product specification - - HEF4538B_6 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 15 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator 16. Legal information 16.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 16.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 16.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. 16.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 17. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] HEF4538B_6 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 06 — 2 November 2009 16 of 17 HEF4538B NXP Semiconductors Dual precision monostable multivibrator 18. Contents 1 2 3 4 5 6 6.1 6.2 7 8 9 10 11 12 13 14 15 16 16.1 16.2 16.3 16.4 17 18 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 3 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4 Functional description . . . . . . . . . . . . . . . . . . . 4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5 Recommended operating conditions. . . . . . . . 6 Static characteristics. . . . . . . . . . . . . . . . . . . . . 6 Dynamic characteristics . . . . . . . . . . . . . . . . . . 7 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 13 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 15 Legal information. . . . . . . . . . . . . . . . . . . . . . . 16 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 16 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Contact information. . . . . . . . . . . . . . . . . . . . . 16 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2009. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 2 November 2009 Document identifier: HEF4538B_6