BGS13AL12 SP3T Antenna Switch with Antenna Termination Port Data Sheet Revision 1.1, 2009-06-25 Preliminary Industrial & Multimarket Edition 2009-06-25 Published by Infineon Technologies AG 81726 Munich, Germany © 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. BGS13AL12 SP3T RF Switch BGS13AL12, SP3T Antenna Switch with Antenna Termination Port Revision History: 2009-06-25, Revision 1.1 Previous Revision: 2009-05-04, Revision 1.0 Page Subjects (major changes since last revision) Converted to the new IFX FrameMaker Template. 9 Pin13 Pin Description 11,12 Electrical Specifications 13 Application Board, Deembedding Board 14 Pin Marking Trademarks of Infineon Technologies AG APOXI™, BlueMoon™, COMNEON™, CONVERGATE™, COSIC™, C166™, CROSSAVE™, CanPAK™, CIPOS™, CoolMOS™, CoolSET™, CORECONTROL™, DAVE™, EasyPIM™, EconoBRIDGE™, EconoDUAL™, EconoPACK™, EconoPIM™, EiceDRIVER™, EUPEC™, FCOS™, FALC™, GEMINAX™, GOLDMOS™, HITFET™, HybridPACK™, ISAC™, ISOFACE™, IsoPACK™, my-d™, MIPAQ™, ModSTACK™, NovalithIC™, OmniTune™, OmniVia™, OPTIVERSE™, OptiMOS™, ORIGA™, PROFET™, PRO-SIL™, PrimePACK™, RASIC™, ReverSave™, SCEPTRE™, SEROCCO™, SICOFI™, SMARTi™, SMINT™, SOCRATES™, SatRIC™, SensoNor™, SINDRION™, SmartLEWIS™, SIEGET™, TrueNTRY™, TEMPFET™, TriCore™, thinQ!™, TRENCHSTOP™, VINAX™, VINETIC™, X-GOLD™, XMM™, X-PMU™, XPOSYS™, XWAY™. Other Trademarks AMBA™, ARM™, MULTI-ICE™, PRIMECELL™, REALVIEW™, THUMB™ of ARM Limited, UK. AUTOSAR™ is licensed by AUTOSAR development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum. COLOSSUS™, FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™ of Epcos AG. FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium. HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™ of Infrared Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc. MICROTEC™, NUCLEUS™ of Mentor Graphics Corporation. Mifare™ of NXP. MIPI™ of MIPI Alliance, Inc. MIPS™ of MIPS Technologies, Inc., USA. muRata™ of MURATA MANUFACTURING CO. OmniVision™ of OmniVision Technologies, Inc. Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc. RFMD™ RF Micro Devices, Inc. SIRIUS™ of Sirius Sattelite Radio Inc. SOLARIS™ of Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd. Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA, Inc. TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™ of Texas Instruments Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ of Diodes Zetex Limited. Last Trademarks Update 2009-05-27 Preliminary Data Sheet 3 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Table of Contents Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 Signals Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 3.1 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Electrical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4 4.1 Application Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Deembedding Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 5 Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Preliminary Data Sheet 4 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch List of Figures List of Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Functional Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Pin Configuration (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Application Board with External Parallel Inductor L1 (15 nH) at Ant Port . . . . . . . . . . . . . . . . . . . . 13 Deembedding Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Pin Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Land Pattern and Stencil Mask. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Preliminary Data Sheet 5 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch List of Tables List of Tables Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Pin Description (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Truth Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Operating Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ESD Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Electrical Characteristics (cont’d) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Preliminary Data Sheet 6 Revision 1.1, 2009-06-25 SP3T RF Switch 6 5 4 GND 7 3 Term ANT 8 2 RF3 GND 9 1 GND 11 12 CTRLB 10 CTRLA • • • • • • • • • • 3 high-linearity Rx ports with power handling capability of up to 30 dBm Antenna Termination Port No external decoupling components required Small leadless package TSLP12 High ESD robustness Low harmonic generation Low insertion loss High port-to-port-isolation 0.1 to 3.0 GHz coverage On-chip control logic supporting logic levels from 1.4 V to 3.0 V Lead and halogen free package (RoHS and WEEE compliant) Vdd • RF2 Main Features: GND Features RF1 1 BGS13AL12 Applications • • • • WCDMA diversity CDMA diversity Analog and Digital Tuner Band Switching Product Name Product Type Package SP3T RF Switch BGS13AL12 PG-TSLP-12-3 Preliminary Data Sheet 7 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Features Description The BGS13AL12 RF MOS switch is specifically designed for WCDMA diversity applications. An additional 4th port allows proper termination of the antenna when turned off. This SP3T offers low insertion loss and high robustness against interferer signals at the antenna port, while maintaining a very small size of only 2.0 x 2.0 mm² and a maximum height of only 0.4 mm The on-chip controller integrates CMOS logic and level shifters, driven by control inputs from 1.4 to 3.0 V. Unlike GaAs technology, external DC blocking capacitors at the RF Ports are only required if DC voltage is applied externally. The BGS13AL12 RF Switch is manufactured in Infineon’s patented MOS technology, offering the performance of GaAs with the economy and integration of conventional CMOS including the inherent higher ESD robustness. Ant RF1 RF2 Rext RF3 Decoder +ESD GND Vdd Ctrl A Ctrl B BGS 13A_F unctional_ D iagram m .vsd Figure 1 Functional Diagram Preliminary Data Sheet 8 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Signals Description 2 Signals Description Table 1 Pin Description (top view) Buffer Type Function 1 GND GND Ground 2 RF3 I/O Rx RF port 3 3 Term I/O Ext. Term Port 4 RF2 I/O Rx RF port 2 5 GND GND Ground 6 RF1 I/O Rx RF port 1 7 GND GND Ground 8 Ant I/O Antenna port 9 GND GND Ground 10 Vdd PWR Vdd supply 11 CTRL A I Control pin A 12 CTRL B I Control pin B 13 NC NC For thermal reasons recommended to connect to Ground RF2 Pin Type GND Name RF1 Pin No. 6 5 4 GND 7 3 Term ANT 8 2 RF3 GND 9 1 GND 12 CTRLB 11 CTRLA Vdd 10 BGS 13A _Pinout.vsd Figure 2 Pin Configuration (top view) Table 2 Truth Table Function Ctrl A Ctrl B Ant → RF1 H H Ant → RF2 L H Ant → RF3 H L Ant → Term L L Preliminary Data Sheet 9 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Electrical Characteristics 3 Electrical Characteristics Table 3 Absolute Maximum Ratings Parameter Symbol Values Min. Typ. Max. Unit Note / Test Condition Storage Temperature Range Tstg -65 – 150 °C – DC Voltage at all pins to GND VDC – – 3.2 V – – – 32 dBm – Unit Note / Test Condition Max RF power at antenna port, any RF port on PAnt IN max Table 4 Operating Ranges Parameter Symbol Values Min. Typ. Max. Ambient Temperature TA -30 – 85 °C – RF Frequency f 0.1 – 3 GHz – Control Voltage low VCtrlL -0.3 – 0.3 V – Control Voltage high VCtrlH 1.4 – Vdd V – Supply Voltage Vdd 2.70 – 3.0 V – Max. Input (Reverse) Power at antenna pin Pin – – 30 dBm – Unit Note / Test Condition Table 5 ESD Ratings Parameter Symbol Values Min. Typ. Max. Human Body-Model IEC 61340-3-1, all pins Vmax – – 500 V – Human Body-Model IEC 61340-3-1, antenna port Vmax – – 1000 V – ESD robustness of antenna port can be increased to 8 kV IEC-61000-4-2 with external protection circuit. Attention: Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit. Preliminary Data Sheet 10 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Electrical Characteristics 3.1 Electrical Specification Test Conditions: • • • • • Termination port impedance: Z0 = 50 Ω Temperature range: TA = -30 °C...+85 °C Supply Voltage: Vdd = 2.8 V Pin = 15 dBm Across operating range of control voltages: VCtrH = 1.4...2.8 V Table 6 Electrical Characteristics Parameter Symbol Values Unit Min. Typ. Max. – 0.45/0.751) 0.65/1.01) dB Note / Test Condition Insertion Loss 824<f<960 MHz 1) – 1) 1.0/0.9 dB – 1710<f<1980 MHz – 0.8/0.7 1980<f<2170 MHz – 0.9/0.81) 1.1/1.01) dB – Inband ripple Rx ports (high bands) – – 0.2 dB – Inband ripple Rx ports (low bands) – – 0.2 dB – All ports @ 0.9 GHz 14 – – dB – All ports @ 2 GHz 12 – – dB – 0.9 GHz 20 – – dB – 2 GHz 20 – – dB – 0.9 GHz 20 – – – 2 GHz 20 – – – 0.9 GHz 20 – – dB – 2 GHz 20 – – dB – 1) Return Loss Isolation Ant – RF1,2,3 Isolation RF1,2,3 – RF1,2,3 Isolation RF Ports – Vdd, Vctrl 1) With external parallel Inductor (15 nH) at Ant port Preliminary Data Sheet 11 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Electrical Characteristics Table 7 Electrical Characteristics (cont’d) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Tx=10 dBm@ ant port, Int= -15 dBm @ant port (TX Freq = 824 - 915 MHz) – -115 -100 dBm – Tx=10 dBm@ ant port, Int= -15 dBm @ant port (TX Freq=1710 - 1980 MHz) – -110 -100 dBm – Tx=10 dBm@ ant port, Int= -15 dBm @ant port(TX Freq = 824 - 915 MHz) – -110 -107 dBm – Tx=10 dBm@ ant port, Int= -15 dBm @ant port (TX Freq=1710 - 1980 MHz) – -110 -107 dBm – Tx1=21.5 dBm, Tx2=21.5 dBm, Int=-30 dBm (650 MHz - 900 MHz) – -83 – dBc – Tx1=21.5 dBm, Tx2=21.5 dBm, Int=-30 dBm (1710 MHz - 2155 MHz) – -82 – dBc – Pin (UMTS) = 23 dBm, Duty Cyle = 100%, unused RF pins = any load, VSWR = 4:1 – – – – – 1 GHz – – -46 dBm – 2 GHz – – -46 dBm – 1) Input Intercept Point Requirements - IMD2 Input Intercept Point Requirements – IMD31) Triple Beat Ratio Harmonic Generation RF ports up to 12.75 GHz Harmonic Generation Termination port up to 12.75 GHz Pin (UMTS) = 30 dBm at low band, 22 dBm at high band, Duty Cycle = 25% – – – – – 1 GHz, Second Harmonic – – -40 dBm – 1 GHz, all other Harmonics up to 12.75GHz – – -46 dBm 2 GHz – – -44 dBm On/Off Switching Time (10-90%) RF – – 5 μs Current Consumption at Vdd Pin – 200 500 μA – Current Consumption at Vctrl Pins – <1 30 μA – – Switching Time and Current Consumtion 1) With external parallel Inductor (15 nH) at Ant port Preliminary Data Sheet 12 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Application Board 4 Application Board XXX X 13 L1 Vdd V1 V2 GND BGS 13AL12 _application _board .vsd Figure 3 Application Board with External Parallel Inductor L1 (15 nH) at Ant Port 4.1 Deembedding Board BGS 13AL 12_D eem bedding _ board.vsd Figure 4 Deembedding Board Preliminary Data Sheet 13 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Package Outlines 5 Package Outlines Package_Outlines.vsd Figure 5 Package Outlines Figure 6 Pin Marking Preliminary Data Sheet 14 Revision 1.1, 2009-06-25 BGS13AL12 SP3T RF Switch Package Outlines Land_ Pattern_Stencil_M ask.vsd Figure 7 Land Pattern and Stencil Mask Preliminary Data Sheet 15 Revision 1.1, 2009-06-25 w w w . i n f i n e o n . c o m Published by Infineon Technologies AG