BGS15AN16 SP5T Antenna Switch Data Sheet Revision 2.1, 2013-01-21 Power Management & Multimarket Edition 2013-01-21 Published by Infineon Technologies AG 81726 Munich, Germany © 2013 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. BGS15AN16 SP5T RF Switch BGS15AN16 SP5T Antenna Switch Revision History: 2013-01-21, Revision 2.1 Previous Revision: 2011-05-08, Revision 2.0 Page Subjects (major changes since last revision) 8,9,10 Updated drawings Trademarks of Infineon Technologies AG BlueMoon™, COMNEON™, C166™, CROSSAVE™, CanPAK™, CIPOS™, CoolMOS™, CoolSET™, CORECONTROL™, DAVE™, EasyPIM™, EconoBRIDGE™, EconoDUAL™, EconoPACK™, EconoPIM™, EiceDRIVER™, EUPEC™, FCOS™, HITFET™, HybridPACK™, ISOFACE™, I²RF™, IsoPACK™, MIPAQ™, ModSTACK™, my-d™, NovalithIC™, OmniTune™, OptiMOS™, ORIGA™, PROFET™, PRO-SIL™, PRIMARION™, PrimePACK™, RASIC™, ReverSave™, SatRIC™, SensoNor™, SIEGET™, SINDRION™, SMARTi™, SmartLEWIS™, TEMPFET™, thinQ!™, TriCore™, TRENCHSTOP™, X-GOLD™, XMM™, X-PMU™, XPOSYS™. Other Trademarks Advance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, PRIMECELL™, REALVIEW™, THUMB™ of ARM Limited, UK. AUTOSAR™ is licensed by AUTOSAR development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum. COLOSSUS™, FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™ of Epcos AG. FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium. HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™ of Infrared Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc. MICROTEC™, NUCLEUS™ of Mentor Graphics Corporation. Mifare™ of NXP. MIPI™ of MIPI Alliance, Inc. MIPS™ of MIPS Technologies, Inc., USA. muRata™ of MURATA MANUFACTURING CO., MICROWAVE OFFICE™ (MWO) of Applied Wave Research Inc., OmniVision™ of OmniVision Technologies, Inc. Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc. RFMD™ RF Micro Devices, Inc. SIRIUS™ of Sirius Sattelite Radio Inc. SOLARIS™ of Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd. Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA, Inc. TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™ of Texas Instruments Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ of Diodes Zetex Limited. Last Trademarks Update 2010-03-22 Data Sheet 3 Revision 2.1, 2013-01-21 BGS15AN16 SP5T RF Switch Table of Contents Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 Signals Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 3.1 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Electrical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Package Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Data Sheet 4 Revision 2.1, 2013-01-21 BGS15AN16 SP5T RF Switch List of Figures List of Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Data Sheet Functional Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pin Configuration (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Package Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pin Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Land Pattern and Stencil Mask. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tape Drawing for PG-TSNP-16-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 3 8 8 9 9 Revision 2.1, 2013-01-21 BGS15AN16 SP5T RF Switch List of Tables List of Tables Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Data Sheet Pin Description (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Truth Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating Ranges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ESD Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical Characteristics (cont’d) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 4 5 5 5 6 7 Revision 2.1, 2013-01-21 BGS15AN16 SP5T RF Switch Features 1 Features Main Features • • • • • • • • • • • • • 5 high-linearity Rx ports with power handling capability of up to 30 dBm All ports fully symmetrical No external decoupling components required High ESD robustness Low harmonic generation Low insertion loss High port-to-port-isolation 0.1 to 3.0 GHz coverage Direct connection to battery Power down mode On-chip control logic supporting logic levels from 1.5 V to Vdd Lead and halogen free package (RoHS and WEEE compliant) Small leadless package TSNP16 with the size of 2.3 x 2.3 mm² and a maximum height of 0.73 mm. Applications • • • • • WCDMA diversity CDMA diversity Analog and Digital Tuner Band Switching LTE Description The BGS15AN16 RF MOS switch is specifically designed for WCDMA diversity applications. Any of the 5 ports can be used as termination of the diversity antenna handling up to 30 dBm. This SP5T offers low insertion loss and high robustness against interferer signals at the antenna port and low harmonic generation in termination mode. An integrated LDO allows to connect Vdd directly to battery, hence no regulated supply voltage is required. A power down mode is implemented to avoid current drain when the device is not in use. The on-chip controller integrates CMOS logic and level shifters, driven by control inputs from 1.5 V to Vdd. Unlike GaAs technology, external DC blocking capacitors at the RF Ports are only required if DC voltage is applied externally. The BGS15AN16 RF Switch is manufactured in Infineon’s patented MOS technology, offering the performance of GaAs with the economy and integration of conventional CMOS including the inherent higher ESD robustness. The device has a very small size of only 2.3 x 2.3 mm² and a maximum height of 0.73 mm Product Name Product Type Package SP5T RF Switch BGS15AN16 PG-TSNP-16-6 Data Sheet 7 Revision 2.1, 2013-01-21 BGS15AN16 SP5T RF Switch Features Ant RF1 RF2 RF3 RF4 RF5 Decoder +ESD GND Figure 1 Data Sheet Vdd Ctrl A Ctrl B Ctrl C Functional Diagram 8 Revision 2.1, 2013-01-21 BGS15AN16 SP5T RF Switch Signals Description 2 Signals Description Table 1 Pin Description (top view) Buffer Type 1 RX5 RX5 Rx RF port 5 2 RX4 I/O Rx RF port 4 3 GND GND Ground 4 RX3 I/O Rx RF port 3 5 GND GND Ground 6 RX2 I/O Rx RF port 2 7 GND GND Ground 8 RX1 I/O Rx RF port 1 9 GND GND Ground 10 ANT I/O Antenna port 11 DGND GND Ground 12 VDD PWR Vdd supply 13 V3 I Control pin 3 14 V2 I Control pin 2 15 V1 I Control pin 1 16 GND GND Ground V3 13 V2 12 11 10 9 GND 14 8 RX1 V1 15 7 GND GND 16 6 RX2 RX5 1 5 GND Data Sheet 4 RX3 3 GND 2 RX4 Figure 2 Function ANT Pin Type DGND Name VDD Pin No. Pin Configuration (top view) 9 Revision 2.1, 2013-01-21 BGS15AN16 SP5T RF Switch Signals Description Table 2 Truth Table Function V1 V2 V3 Ant → RF1 1 0 0 Ant → RF2 0 1 0 Ant → RF3 0 0 1 Ant → RF4 1 0 1 Ant → RF5 1 1 1 Power down mode 0 0 0 All off 1 1 0 All off 0 1 1 Data Sheet 10 Revision 2.1, 2013-01-21 BGS15AN16 SP5T RF Switch Electrical Characteristics 3 Electrical Characteristics Table 3 Absolute Maximum Ratings Parameter Symbol Values Min. Typ. Max. Unit Note / Test Condition Storage Temperature Range Tstg -55 – 150 °C – DC Voltage at Vdd pin to GND VDC – – 5.5 V – DC Voltage at all other pins to GND VDC – – 3.6 V – Max RF power at antenna port, any RF port on PAnt IN max – – 32 dBm 50 Ω Max. Input (Reverse) Power at antenna pin – – 30 dBm 50% duty cycle 50 Ω Pin Attention: Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit. Table 4 Operating Ranges Parameter Symbol Values Min. Typ. Max. Unit Note / Test Condition Ambient Temperature TA -30 – 85 °C – RF Frequency f 0.1 – 3 GHz – Control Voltage low VCtrlL -0.3 – 0.3 V – Control Voltage high VCtrlH 1.5 – Vdd V Vdd < 3.3V Supply Voltage Vdd 2.85 – 4.7 V – Unit Note / Test Condition Table 5 ESD Ratings Parameter Symbol Values Min. Typ. Max. ESD HBM, all ports Vmax 1 – – kV all GND ports connected ESD CDM, all ports Vmax 2 – – kV – ESD MM, all ports Vmax 100 – – V – 8 – – kV with external 27nH inductor ESD robustness IEC-61000-4-2, antenna port Vmax Data Sheet 11 Revision 2.1, 2013-01-21 BGS15AN16 SP5T RF Switch Electrical Characteristics 3.1 Electrical Specification Test Conditions: • • • • • • Termination port impedance: Z0 = 50 Ω Temperature range: TA = -30 °C...+85 °C Supply Voltage: Vdd = 2.85 V...4.7 V Pin = 0 dBm Across operating range of control voltages: VCtrH = 1.5...3.5 V Measured using external circuitry according application note AN259. Table 6 Electrical Characteristics Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. – 0.341) 0.49 dB – – 0.55 1) 0.75 dB RX1, RX5 – 1) Insertion Loss 824<f<960 MHz 1710<f<1980 MHz 1710<f<1980 MHz 1980<f<2170 MHz – 1980<f<2170 MHz – 2170<f<2690 MHz – 0.5 0.7 dB RX 2-4 0.59 1) 0.79 dB RX1, RX5 0.55 1) 0.75 dB RX2-4 0.69 1) 0.89 dB RX1, RX5 1) 0.85 dB RX2-4 2170<f<2690 MHz – 0.65 Inband ripple Rx ports (high bands) – 0.05 0.1 dB – Inband ripple Rx ports (low bands) – 0.03 0.1 dB – All ports @ 824 - 915 MHz 25 30 – dB – All ports @ 1.71 - 2.69 GHz 14 20 – dB – 824 - 915 MHz 35 40 – dB – 1.71 - 1.98 GHz 26 30 – dB – 1.98 - 2.17 GHz 24 30 – dB – 2.17 - 2.69 GHz 24 27 – dB – 824 - 915 MHz 32 35 – dB – 1.71 - 1.98 GHz 26 28 – dB – 1.98 - 2.17 GHz 25 28 – dB – 2.17 - 2.69 GHz 21 25 – dB – 0.9 GHz 40 30 – dB – 2 GHz 1)TA = 25 °C and Vdd = 3.5 V 20 20 – dB – 1) Return Loss Isolation Ant – RF1,2,3,4,5 Isolation RF1,2,3 – RF1,2,3,4,5 Isolation RF Ports – Vdd, Vctrl Data Sheet 12 Revision 2.1, 2013-01-21 BGS15AN16 SP5T RF Switch Electrical Characteristics Table 7 Electrical Characteristics (cont’d) Parameter Symbol Values Unit Note / Test Condition Min. Typ. Max. Tx=15 dBm@ ant port, Int= -15 dBm @ant port (TX Freq = 824 - 915 MHz) – -110 -104 dBm – Tx=10 dBm@ ant port, Int= -15 dBm @ant port (TX Freq=1710 - 1980 MHz) – -110 -104 dBm – Tx=15 dBm@ ant port, Int= -15 dBm @ant port(TX Freq = 824 - 915 MHz) – -110 -104 dBm – Tx=10 dBm@ ant port, Int= -15 dBm @ant port (TX Freq=1710 - 1980 MHz) – -110 -104 dBm – Pin (UMTS) = 23 dBm, Duty Cyle = 100%, unused RF pins = any load, VSWR = 4:1 – – – – – 824 to 960 MHz – – -46 dBm – – – -46 dBm – Pin = 30 dBm at low band, 22 dBm at high band, Duty Cycle = 25% – – – – – 824 to 960 MHz, Third Harmonic – -50 -42 dBm – 824 to 960 MHz, all other Harmonics up to 12.75 GHz – -50 -44 dBm – 1920 to 1980 MHz – -50 -44 dBm – On/Off Switching Time (10-90%) RF 0.3 1 3 μs – Boost Converter Settling Time – 10 25 μs after power down mode Current Consumption at Vdd Pin 50 75 100 μA – Current Consumption at Vctrl Pins 0.1 1 30 μA – Current Consumption at power down mode 1) TA = 25 °C and Vdd = 3.5 V – – 1 μA – 1) Input Intercept Point Requirements - IMD2 Input Intercept Point Requirements – IMD31) Harmonic Generation RF ports up to 12.75 GHz1) 1920 to 1980 MHz Harmonic Generation RF port up to 12.75 GHz 1) Switching Time and Current Consumtion Data Sheet 13 Revision 2.1, 2013-01-21 BGS15AN16 SP5T RF Switch Package Outline Package Outline 2.3 ±0.05 0.73 +0.04 -0.03 1) 2 ±0.035 0.02 MAX. 16 16 x 0.2±0.035 2.3 ±0.05 16 x 0.2±0.035 1.4 ±0.035 1±0.05 1.4 ±0.005 2 ±0.035 1±0.05 0.2 x 45° 4 1 1) Dimension applies to plated terminals Figure 3 Package Outline 123456 Type code Date code (YYWW) Pin 1 marking Figure 4 Data Sheet Pin Marking 14 Revision 2.1, 2013-01-21 BGS15AN16 SP5T RF Switch Package Outline NSMD Soldering Type: Reflow Soldering 0.225 0.2 0.3 0.3 0.2 0.3 Copper 0.55 1.25 2.3 1.25 2.3 0.3 0.2 0.3 0.3 0.2 0.3 0.2 0.3 0.2 0.3 Solder mask 0.2 0.3 0.2 Stencil apertures SMD - V1 SMD - V2 0.35 0.225 0.3 0.2 0.3 0.3 Copper Figure 5 0.3 0.2 0.15 2.3 0.15 2.3 0.55 1.25 0.55 1.25 0.35 0.225 0.075 0.275 0.225 0.2 0.3 0.3 0.2 0.3 0.2 Solder mask 0.3 0.3 0.2 Land Pattern and Stencil Mask 0.95 8 2.7 Pin 1 marking Data Sheet 0.2 Vias top to first inner layer 4 Figure 6 0.3 0.2 2.7 Tape Drawing for PG-TSNP-16-6 15 Revision 2.1, 2013-01-21 w w w . i n f i n e o n . c o m Published by Infineon Technologies AG