RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 0,64 0,025 TOP OF PCB LP 12,67 0,499 1,27 0,050 2,54 0,100 1,27 0,050 16,66 0,656 0,38 ±0,10 0,015 ±0,004 2,54 0,100 8 1 0,89 ±0,07 0,035 ±0,003 1 8 11,43 ±0,13 0,450 ±0,005 18,67 0,735 1,60 ±0,07 0,063 ±0,003 2,97 0,117 8,89 0,350 15,74 0,620 11,75 0,463 3,20 ±0,25 0,126 ±0,010 3,25 ±0,07 0,128 ±0,003 IMPROVED CONTACT DESIGN (PRE BEND) 11,43 0,450 15,54 0,612 8,13 0,320 NOTE 1: PANEL GROUND FLANGES BOTH SIDES, BOTTOM AND TOP (GF5) NOTE 2: RoHS COMPLIANT 1:1 T e chnical sp e cif icat io ns Stan d ard ap p l i c . Standard description Standard description Thickness of plating Thickness of plating Standard description Thickness of plating A sse mb l y p ro c e ss Packaging Solder temperature Suitable assembly process A p p ro v al s UL insulation body UL File No. RoHS compliant UL 94 Val u e T e st Data Stand ard ap p l i c . Val u e PBT 30% Me c han i c al p ro p e rti e s C5210 (acc. JIS) Insertion/withdrawal force IEC 603-7 max. 20 N see chart Mechanical operations IEC 512-5, 9a min. 1.000 80 µin matte Sn over 50 µin Ni Effectiveness of connector C2680 (acc. JIS) coupling device IEC 512-8, 15f 50 N 50 µin Ni El e c tri c al p ro p e rti e s Cre e p ag e / c l e aranc e d i stan c e s a) Contact - contact IEC 807-3 0,52 mm Tray b) Contact - shell IEC 807-3 min. 1,0 mm 235°C at 3-5s Vo l tag e p ro o f (Di e l e c tri c Wi thstan d Vo l tag e ) wave a) Contact - contact IEC 512-2, 4a min. 1.000 V AC/DC b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC Current carrying capacity IEC 512-3, 5b 1.5 A @ 25° C V0 Contact resistance IEC 512-2, 2a max. 30 mOhm E145613 Insulation resistance IEC 512-2, 3a min. 500 MOhm Yes En v i ro n me ntal p ro p e rti e s Operation temperature 0 - 70° C PART NO. IDENT. NR. CONTACT FINISH OBERFLÄCHENBEHANDLUNG 133271 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Mate ri al s & F i n i sh Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Shell/shield plating Tolerances Information: 0,8µm Au [30µin], OVER 1,25 [50µin]Ni Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJLS 8P8C, 1X1 133701 www.ERNI.com F 29.08.2007 Index Date Class MJ I (1/1) A3