RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 14,72 0,580 21,59 0,850 MAX 0,38 ±0,100 0,015 ±0,004 16,66 0,656 PCB EDGE LP 1 8 L.E.D. 1 13,63 0,537 L.E.D. 2 3,20 ±0,500 0,126 ±0,020 15,88 0,625 11,43 ±0,130 0,450 ±0,005 10,89 0,429 PART NO. IDENT-NR. DATE CODE DATUMSCODE XXXXXX XXXX RC NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) NOTE 2: PANEL GROUND FLANGES BOTH SIDES, TOP AND BOTTOM (GF5) NOTE 3: RoHS COMPLIANT; PRINT "RC" WITH DATE CODE NO. IDENT. NR. MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin), OVER Ni TERMINAL FINISH: Sn MATTE LED LENS: EPOXY MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TEMPERATURE: -40°C TO +85°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 203475 Information: SCHEMATIC NUMBER: H5B02 LED 2 LEFT LED 2 LINKS LED 1 RIGHT LED 1 RECHTS LED CODE YELLOW GREEN L1 Tolerances Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C10T, 1x1, INT. MAG., LED ALIGNED 203476 www.ERNI.com - 17.11.2006 Index Date Class MJIM I (1/2) A3 ELECTRICAL SCHEMATICS 1000 BASE T - H5B02 ELEKTRISCHER SCHALTPLAN PCB CABLE 4 x 75 4 x 0.01 µF TD0+ P1 J1 MX0+ TD0- P2 J2 MX0- TD1+ P3 J3 MX1+ TD1- P6 J6 MX1- TD2+ P4 J4 MX2+ TD2- P5 J5 MX2- TD3+ P7 J7 MX3+ J8 MX3- TD3- P8 1000pF/2KV VCC P9 SHIELD GND P10 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL ±0.05 [0.002] UNLESS NOTED 1,27 0,050 0,64 0,025 2,54 0,100 1 0,89 ±0,070 0,035 ±0,003 x10 10 1,60 ±0,070 0,063 ±0,003 x2 4,06 0,160 1,02 ±0,070 0,040 ±0,003 x4 8,18 0,322 8,89 0,350 14 2,54 0,100 13 11 12 3,05 0,120 3,25 ±0,070 0,128 ±0,003 x2 11,43 0,450 13,26 0,522 15,49 0,610 LED SPECIFICATIONS LED ANWEISUNG MAGNETICS SPECIFICATIONS @ 25°C TURNS RATIO: Vf TYP Vf MAX If mA YELLOW 2.1 2.5 20 11 12 13 14 GREEN 2.2 2.5 20 11 12 13 14 ORANGE/GREEN 2.05/2.2 2.5 20 11 12 13 14 CIRCUIT DIAGRAM SCHALTPLAN 1CT:1CT ±3% OCL(100 KHz, 0.1 V, 8 mA) 350 µH MIN INSERTION LOSS: 1-100 MHz COLOR FARBE -1.1 dB MAX RETURN LOSS: -18 dB MIN 60 MHz -14 dB MIN 80 MHz -12 dB MIN 100 MHz -10 dB MIN CROSSTALK: 1-100 MHz -35 dB TYP CMR: 0,1-30 MHz 30-60 MHz 60-100 MHz -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 1-40 MHz Information: Tolerances Scale G G N N 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C10T, 1x1, INT. MAG., LED ALIGNED 203476 www.ERNI.com Class MJIM I (2/2) A3