8 11.43±0.13 [.450±.005] 10.89 [.429] RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED 16.66 [.656] 0.38±0.10 [.015±.004] 11.43 [.450] 0.64 [.025] 2.54 [.100] 1.27 [.050] ˚.063±.003] X2 ˚3.25±0.07 [ ˚.128±.003] X2 2.03 [.080] ELECTRICAL SCHEMATICS 1000 BASE T - M5A01 ELEKTRISCHES DIAGRAMM PC B TD0+ P1 2.03 [.080] CABL E J1 MX0+ TD0- P2 J2 MX0- TD1+ P3 J3 MX1+ CMR CHOKES ˚1.60±0.07 [ 10 2.54 [.100] ˚.035±.003] X10 3.05 [.120] ˚0.89±0.07 [ PCB EDGE LP 8.89 [.350] 1 TD1- P6 MAGNETIC SPECIFICATIONS @ 25˚C TD2+ P4 1,500 Vrms ISOLATION 14.72 [.580] 1 13.63 [.537] 3.20±0.20 [.126±.008] 21.59 [.850] MAX 15.88 [.625] J6 MX1J4 MX2+ OCL (100KHz, 0.1V, 8mA):350µH MIN CMR (0.1-100MHz) -40dB TYP. INSERTION LOSS (0.1-100MHz): -1.1dB MAX CROSSTALK (0.1-100MHz): -[33-20log(F/100MHz)]dB TYP RETURN LOSS: 1-40MHz 60MHz -14.5dB MIN -12dB MIN 100MHz -10dB MIN J5 MX2- TD3+ P7 J7 MX3+ TD3- P8 -18dB MIN 80MHz TD2- P5 J8 MX30.01 µf X4 VCC 4X 75 W P9 1000 pf/2KV GND P10 MATERIALS AND FINISH NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) SHIELDING: Cu ALLOY, PLATED WITH Ni Information: Scale Tolerances 2:1 - CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8µm [30µin], OVER Ni MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TEMPERATURE: 0˚C TO 70˚C All Dimensions SCHEMATIC NUMBER: M5A01 Consider protection memo from DIN 34 TERMINAL FINISH: SnPb All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. - in mm [in] Subject to modification without Designation MOD JACK - MJIM prior notice. Drawing will not be updated. 8C10T, 1X1, INTEGRATED MAGNETICS ERNI Components Rev. - Date - 203267 CHESTER, VA U.S.A. - Group/Type MJIM I