32.22±0.20 [1.269±.008] 14.89 [.586] 21.59 MAX 0.38±0.10 [.015±.004] RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT TOP OF PCB LP 13.97 [.550] 1 8 1 8 13.80 [.543] 3.20±0.30 [.126±.012] 31.12 [1.225] 10.89 [.429] 25.40±0.13 [1.000±.005] RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENER FUER LEITERPLATTE - BESTUCKUNGSSEITE ALL TOLERANCES ±0.05 UNLESS NOTED 12.70 [.500] 2.54 [.100] 11.43 [.450] 1.27 [.050] ˚.035±.003] X20 1 1 ˚.128±.003] X2 10 10 ˚.063±.003] X3 3.68 [.145] ˚1.60±0.07 [ 2.73 [.107] MAGNETICS SPECIFICATIONS @ 25˚C 10.16 [.400] ˚3.25±0.07 [ 8.89 [.350] ˚0.89±.07 [ 2.54 [.100] 25.40 [1.000] ELECTRICAL SCHEMATICS 1000 BASE T - M5B01 ELEKTRISCHES DIAGRAMM PCB 2.73 [.107] 4X 0.01 µF 4X 75 CABLE W TD0+ P1 J1 MX0+ TD0- P2 J2 MX0- TD1+ P3 J3 MX1+ TD1- P6 J6 MX1- TD2+ P4 J4 MX2+ TD2- P5 J5 MX2- -35 dB TYP TD3+ P7 J7 MX3+ 0.1 - 30 MHz -50 dB TYP TD3- P8 J8 MX3- 30 - 60 MHz -40 dB TYP VCC 60 - 100 MHz -35 dB TYP TURNS RATIO: 1CT:1CT ±3% OCL(100 KHz, 0.1 V, 8 mA) 350 µH MIN INSERTION LOSS: 1-100 MHz -1.1 dB MAX RETURN LOSS: 1-40 MHz -18 dB MIN 60 MHz -14 dB MIN 80 MHz 100 MHz -12 dB MIN -10 dB MIN CROSSTALK: 1-100 MHz CMR: ISOLATION 1000pF/2KV P9 GND P10 1500 Vrms NOTE 1. SIDE SHIELD TABS IN FRONT 3.68mm (F2) NOTE 2: ONE REAR SHIELD TAB CENTERED MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TEMPERATURE: 0˚C TO 70˚C NOTE 3: PANEL GROUND FLANGES BOTH SIDES, BOTTOM AND TOP (GF5) MEASUREMENT Information: NO. Tolerances Subject to modification without All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. 2:1 Scale All Dimensions in mm SCHEMATIC NUMBER: M5B01 Consider protection memo from DIN 34 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: SnPb Designation MOD JACK - MJIM prior notice. Drawing will not be updated. 8C10T, 1X2, INTEGRATED MAGNETICS 203184 www.ERNI.com b Index Index 01MAR04 Change No. Date - Material Name Plot At - Group/Type MAXMJ I