21.59 [.850] MAX 59.09 [2.326] 8 1 8 1 8 1 8 13.80 [.543] 1 3.05±0.50 [.120±.020] 3 x 13.97[.550] = (41.91 [1.650]) 10.89 [.429] 53.34±0.13 [2.100±.005] RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENER FUER LEITERPLATTE - BESTUCKUNGSSEITE ALL TOLERANCES ±0.05 [.002] UNLESS NOTED 52.07 [2.050] 40.64 [1.600] 38.10 [1.500] 26.67 [1.050] 24.13 [.950] 10.16 [.400] 1 8 8 8 8.89 [.350] 10.16 [.400] 2.54 [.100] 12.70 [.500] 1 1 1 1.27 [.050] 3.68 [.145] 2.54 [.100] ˚3.25±0.07 [˚.128±.003] X2 ˚1.60±0.07 [˚.063±.003] X5 ˚0.89±0.07 [˚.035±.003] X32 2.73 [.107] 2.73 [.107] 53.34 [2.100] NOTE 1: SIDE SHIELD TABS IN FRONT 3.68mm (F2) NOTE 2: REAR SHIELD TABS BETWEEN EACH PORT (T) NOTE 3: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) MATERIALS AND FINISH Information: Tolerances HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK CONTACT FINISH: Au, 0.8µm [30µin] OVER Ni TERMINAL FINISH: SOLDER MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES OPERATING TERMPERATURE: 0˚C TO 70˚C Consider protection memo from DIN 34 CONTACTS: PHOSPHOR BRONZE All Dimensions in mm SCHEMATICS NUMBER: M3D01 SHIELDING: Cu ALLOY, PLATED WITH Ni All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. 23JUL04 Index Date Designation MOD JACK - MJIM 8C8T, 1X4, INTEGRATED MAGNETICS www.ERNI.com d 2:1 Scale 203160 MAXMJ I RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 14.89 [.586] 0.38±0.10 [.015±.004] 60.19±0.20 [2.370±.008] TOP OF PCB LP ELECTRICAL SCHEMATIC M3D01 ELEKTRISCHES DIAGRAMM PCB CABLE P1 J1 CT P4 P2 J2 P3 J3 CT P5 P6 J6 N/C P7 J4,5 GND P8 J7,8 1000pF/2KV 4X 75 W MAGNETICS SPECIFICATIONS @ 25˚C AUTO MDIX COMPATIBLE TURNS RATIO: (P1-P2 : J1-J2) 1CT : 1 ±3% (P3-P6 : J3-J6) 1CT : 1 ±3% OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN INSERTION LOSS: 0.1-100 MHz RETURN LOSS: 0.5 - 30 MHz: 40 MHz: 50 MHz 60 - 80 MHz CROSSTALK: 1-100 MHz 0.9 OHMS MAX -1.1 dB MAX -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN -40 dB TYP CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms Information: Tolerances 2:1 Scale - All Dimensions in mm Consider protection memo from DIN 34 DCR (P1-P2, P3-P6) All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. 23JUL04 Index Date MOD JACK - MJIM 8C8T, 1X4, INTEGRATED MAGNETICS www.ERNI.com d Designation 203160 MAXMJ I