21.59 [.850] MAX 59.09 [2.326] 1 8 8 1 8 1 8 13.80 [.543] 1 3.05±0.50 [.120±.020] 3 x 13.97[.550] = (41.91 [1.650]) 10.89 [.429] 53.34±0.13 [2.100±.005] RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENER FUER LEITERPLATTE - BESTUCKUNGSSEITE ALL TOLERANCES ±0.05 [.002] UNLESS NOTED 53.34 [2.100] 40.64 [1.600] 39.37 [1.550] 26.67 [1.050] 12.70 [.500] 11.43 [.450] 1 8.89 [.350] 10.16 [.400] 2.54 [.100] 25.40 [1.000] 1 1 10 1.27 [.050] 3.68 [.145] 2.54 [.100] 10 1 3.25±0.07 [ .128±.003] X2 10 10 0.89±0.07 [ .035±.003] X40 1.60±0.07 [ .063±.003] X5 2.73 [.107] 2.73 [.107] 53.34 [2.100] NOTE 1: SIDE SHIELD TABS IN FRONT 3.68mm (F2) NOTE 2: REAR SHIELD TABS BETWEEN EACH PORT (T) NOTE 3: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8µm [30µin] OVER Ni TERMINAL FINISH: SOLDER MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES OPERATING TERMPERATURE: 0°C TO 70°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. MATERIALS AND FINISH Scale Tolerances Information: - All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. c 23JUL04 Designation Subject to modification without prior notice. Drawing will not be updated. 2:1 MOD JACK - MJIM 8C10T, 1X4, INTEGRATED MAGNETICS 203185 www.ERNI.com Class MAXMJ I (1/2) A3 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 14.89 [.586] 0.38±0.10 [.015±.004] 60.19±0.20 [2.370±.008] TOP OF PCB LP ELECTRICAL SCHEMATICS 1000 BASE T - M5B01 ELEKTRISCHES DIAGRAMM PCB TD0+ P1 4X 0.01 µF CABLE 4X 75 W J1 MX0+ TD0- P2 J2 MX0- TD1+ P3 J3 MX1+ TD1- P6 J6 MX1- TD2+ P4 J4 MX2+ TD2- P5 J5 MX2- TD3+ P7 J7 MX3+ TD3- P8 J8 MX3- VCC 1000pF/2KV P9 MAGNETICS SPECIFICATIONS @ 25°C TURNS RATIO: 1CT:1CT ±3% OCL(100 KHz, 0.1 V, 8 mA) 350 µH MIN INSERTION LOSS: 1-100 MHz -1.1 dB MAX RETURN LOSS: 1-40 MHz -18 dB MIN 60 MHz -14 dB MIN 80 MHz -12 dB MIN 100 MHz -10 dB MIN CROSSTALK: 1-100 MHz -35 dB TYP CMR: 0.1 - 30 MHz -50 dB TYP 30 - 60 MHz -40 dB TYP 60 - 100 MHz -35 dB TYP ISOLATION 1500 Vrms Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. GND P10 Tolerances Information: Scale - All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. c 23JUL04 Designation Subject to modification without prior notice. Drawing will not be updated. 2:1 MOD JACK - MJIM 8C10T, 1X4, INTEGRATED MAGNETICS 203185 www.ERNI.com Class MAXMJ I (2/2) A3