UPR60e3 Powermite High Efficiency 2 Amp Ultrafast Rectifier Compliant DESCRIPTION The Microsemi UPR60e3 Powermite high efficiency rectifiers are RoHS compliant and offers optimized forward voltage characteristics with reverse blocking capabilities up to 600 Volts. They are ideal for surface mount applications that operate at high frequencies. In addition to its size advantages, Powermite package features include a full metallic bottom that eliminates possibility of solder flux entrapment during assembly and a unique locking tab acts as an efficient heat path from die to mounting plane for external heat sinking with very low thermal resistance junction to case (bottom). Its innovative design makes this device ideal for use with automatic insertion equipment. DO-216 Package Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • • • • • • • Low thermal resistance DO-216 package for higher current operation Ultrafast recovery time of 30 ns Efficient heat path with Integral locking bottom metal tab Low forward voltage Full metallic bottom eliminates flux entrapment Compatible with automatic insertion equipment Low profile-maximum height of 1 mm RoHS compliant APPLICATIONS / BENEFITS • • Switching and regulating power supplies Charge pump circuits • • • Reduces reverse recovery loss with low I RM 2 Small 8.45 mm foot print (See mounting pad details) Replaces wire bonded die with a flip chip package MAXIMUM RATINGS @ 25 ºC unless otherwise specified Parameters/Test Conditions Junction and Storage Temperature Thermal Resistance Junction-to-Tab Thermal Resistance Junction-to-Bottom Non-Repetitive Peak Forward Surge Current (At 8.3 ms Single half-sine wave) Working Peak Reverse Voltage (1) Rated Average Power Dissipation @ TTAB = 75 ºC Average Rectified Output Current (At rated V RWM , TC =75ºC) Solder Temperature @ 10 s Symbol Value Unit TJ and TSTG I FSM -55 to +150 30 10 20 ºC ºC/W ºC/W A V RWM P M(AV) IO 600 2.5 2.0 V W A 260 o Notes: 1. When mounted on FR-4PC board using 2 oz copper with recommended minimum foot print. SPICE MODEL UPR60 (SURFACE MOUNT RECTIFIER) .MODEL UPR60 D(IS = 1.88N N = 1.6 RS = 0.133 IKF = 2.37M + XTI = 3 EG = 1.11 Cjo = 25p M = .41 Vj = .424 Fc = 0.5 + Isr = 10n Nr = 2.135 Bv = 600 Ibv = 300n Tt = 62n RF01145, Rev. A (10/31/13) ©2013 Microsemi Corporation C MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Page 1 of 5 UPR60e3 MECHANICAL and PACKAGING • • • • • • • CASE: Void-free transfer molded thermosetting epoxy compound meeting UL94V-0 TERMINALS: Annealed matte-tin plating over copper and readily solderable per MIL-STD-750, method 2026. (Consult factor for tin-lead plating.) MARKING: R60• for UPR60e3 (dot indicates “e3” designation) POLARITY: Cathode designated by TAB 2 TAPE & REEL option: 12 mm tape per standard EIA-481-B. Consult factory for quantities. WEIGHT: Approximately 0.016 gram See Package Dimensions on last page. PART NOMENCLATURE UPR 60 e3 Ultrafast Powermite Rectifier RoHS Compliant Working Peak Reverse Voltage SYMBOLS & DEFINITIONS Definition Symbol CT f IF I FSM IO IR I REC VR V RWM Total Capacitance: The total small signal capacitance between the diode terminals of a complete device. Frequency Forward Current: The dc current flowing from the external circuit into the anode terminal Surge Peak Forward Current: The forward current including all nonrepetitive transient currents but excluding all repetitive transients (ref JESD282-B) Average Rectified Output Current: The Output Current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave input and a 180 degree conduction angle. Reverse Current: The dc current flowing from the external circuit into the cathode terminal at the specified voltage V R Recovery Current: Reverse Voltage: A positive dc cathode-anode voltage below the breakdown region Working Peak Reverse Voltage: The peak voltage excluding all transient voltages (ref JESD282-B). Also sometimes known historically as PIV. ELECTRICAL CHARACTERISTICS @ T A = +25 ºC unless otherwise noted Parameter Symbol Conditions Min Max Units Forward Voltage (Note 1) VF IF = 2.0 Amps 1.6 V Forward Voltage (Note 1) VF IF = 1.2 Amps 1.4 V Reverse Current IR V R = 600 V, T J = 25 ºC 1 µA Reverse Current IR V R = 600 V, T J = 125 ºC 100 µA Reverse Recovery Time t rr I F = 0.5 A; I R = 1.0 A: I REC = 0.25 A 30 ns Note 1: Short duration test pulse used to minimize self – heating effect. RF01145, Rev. A (10/31/13) ©2013 Microsemi Corporation Page 2 of 5 UPR60e3 CT @ 1 MHz (pF) GRAPHS V R (Volts) IR (Amperes) FIGURE 1 Typical Capacitance V R (Volts) FIGURE 2 Typical Reverse Current versus Voltage RF01145, Rev. A (10/31/13) ©2013 Microsemi Corporation Page 3 of 5 UPR60e3 IF (Amperes) GRAPHS V F (Volts) FIGURE 3 Typical Forward Voltage versus Current RF01145, Rev. A (10/31/13) ©2013 Microsemi Corporation Page 4 of 5 UPR60e3 PACKAGE DIMENSIONS Ltr A B C D E F G H J K Dimensions Inch Millimeters Min Max Min Max 0.029 0.039 0.73 0.99 0.016 0.026 0.40 0.66 0.070 0.080 1.77 2.03 0.087 0.097 2.21 2.46 0.020 0.030 0.50 0.76 0.051 0.061 1.29 1.54 0.021 0.031 0.53 0.78 0.004 0.008 0.10 0.20 0.070 0.080 1.77 2.03 0.035 0.045 0.89 1.14 MOUNTING PAD DIMENSIONS Ltr A B C D E RF01145, Rev. A (10/31/13) ©2013 Microsemi Corporation Dimensions Inch Millimeters 0.100 2.54 0.105 2.67 0.050 1.27 0.030 0.76 0.025 0.64 Page 5 of 5