Piggyback Shrink Boot Connector Adapters 443-033 Band-in-a-Can Piggyback Boot Adapter, Composite With Shrink Boot Nut & Self-Locking Rotatable Coupling Our Easiest to Use and Most Versatile Individual and Overall Shield Termination and Pre-Terminated Shrink Boot Adapter How To Order Product Series 443 Angular Function S = Straight W = 90° Elbow H Connector Designator (Table III) A = MIL-DTL-83723, Series III; MIL-DTL-5015; MIL-DTL-26482 F = MIL-DTL-38999, Series I & II G = MIL-DTL-28840 H = MIL-DTL-38999, Series III & IV S Finish Sym (Table II) 033 XM 19 Basic No. Shell Size (Table III) .440 (11.2) Typ O-Ring Slot Option S = Pigtail Slot (Omit For None) Entry Dia. (Table IV) 20 K Band Option K = Precoiled (Omit For None) S-2 Boot Material Type (Table V) Accomodates 600-052-1 Band M As Supplied Sym K Band Notes See Table I on page 3 for front-end dimensional details. Ref Glenair standard STD-001 (common accessory interface data). Coupling Nut supplied unplated. O-Ring not supplied with Connector Designator A Consult factory for additional sizes available. Entry diameter equals max wire bundle diameter. One Band supplied with each assembly. To order separately, see 600-052-1. Use Glenair 600-050 hand or 600-051 pneumatic banding tools. Glenair 600-091 or 600-157 Series Backshell Assembly Tools are recommended for assembly and installation. © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 10 E-Mail: [email protected] Piggyback Shrink Boot Connector Adapters 443-033 Band-in-a-Can Piggyback Boot Adapter, Composite With Shrink Boot Nut & Self-Locking Rotatable Coupling Table IV: Cable Entry Table III: Shell Size Shell Size E .060 (1.5) F .090 (2.3) G .090 (2.3) H Ø Entry Max Entry Dash No. Entry Code ± .06 (1.5) ± .03 (0.8) M Min N Max A F/L G H U 08 08 - 09 - .690 (17.5) .880 (22.4) 1.19 (30.2) 10 10 .940 (23.9) .220 (5.6) .330 (8.40) .236 (6.00) 10 10 - 11 08 .750 (19.1) 1.00 (25.4) 1.25 (31.8) 12 12 1.17 (29.7) .280 (7.1) .430 (11.0) .236 (6.00) 12 12 11 13 10 .810 (20.6) 1.13 (28.7) 1.31 (33.3) 14 14 14 13 15 12 .880 (22.4) 1.31 (33.3) 1.38 (35.1) 16 14 16 1.28 1.41 (32.5) (35.8) .340 .460 (8.6) (11.7) .510 .670 (13.0) (17.0) .276 .276 (7.00) (7.00) 16 16 15 17 14 .940 (23.9) 1.38 (35.1) 1.44 (36.6) 20 18 18 17 19 16 .970 (24.6) 1.44 (36.6) 1.47 (37.3) 20 18 20 1.50 1.56 (38.1) (39.6) .550 .620 (14.0) (15.7) .750 .820 (19.0) (20.8) .276 .335 (7.00) (8.50) 20 20 19 21 18 1.06 (26.9) 1.63 (41.4) 1.56 (39.6) 22 22 22 22 24 1.69 1.81 42.9) (46.0) .700 .780 (17.8) (19.8) .960 1.05 (24.4) (26.7) .335 .335 (8.50) (8.50) 24 24 28 32 1.91 2.02 (48.5) (51.3) .850 .950 (21.6) (24.1) 1.18 1.31 (30.0) (33.3) .335 .394 (8.50) (10.0) 28 - 23 20 1.13 (28.7) 1.75 (44.5) 1.63 (41.4) 24 23 25 22 - 1.19 (30.2) 1.88 (47.8) 1.69 (42.9) 32 25 1.34 (34.0) 2.13 (54.1) 1.78 (45.2) 32 - 24 F Table II: Backshell Finish Options Sym XM XMT XW Anti-Decoupling Device - Typ Finish Description 2000 Hour Corrosion Resistant Electroless Nickel 2000 Hour Corrosion Resistant NI-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour Grey 2000 Hour Corrosion Resistant Cadmium Olive Drab Over Electroless Nickel E N After Unrestricted Shrinkage G Accommodates 600-052-1 Band Pigtail Termination Slot - Typ Entry Table V: Boot Material Selection Guide Attribute Continuous Operating Temp. Resistence To Fuels, Oils Low Toxicity, Zero Halogen Type 1 High-Performance Semi-Rigid Elastomer -75° To +150° cExcellent No Type 2 Zero-Halogen Semi-Rigid Polyolefin 30° To +135° cVery Good Yes Type 3 General Purpose Flexible Polyolefin 55° To 135° c Good No Dimensions in Inches (millimeters) are subject to change without notice. © 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 11 E-Mail: [email protected]