Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current Data Sheet 1 EMIFILr (Capacitor type) Single Circuit Type for Large Current NFM55P Series (2220 Size) c Dimensions c Insertion Loss Characteristics (Main Items) (50Ω - 50Ω) 2.2±0.3 0 4.7+0.5 –0.3 5.7±0.3 5.0±0.3 Insertion Loss (dB) 20 1.7+0.3 –0.2 (2) (1) NFM55PC155F1H4 40 60 (3) 80 100 0.1 : Electrode (2) 1 (in mm) c Equivalent Circuit 10 Frequency (MHz) 100 1000 3000 c Packaging Input (Output) (1) Code Packaging L 180mm Embossed Tape Minimum Quantity 500 B Bulk(Bag) 100 Output (Input) (3) No polarity. GND (2) c Rated Value (p: packaging code) Part Number NFM55PC155F1H4p Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range 1.5µF 80/-20% 6A 50Vdc 100M ohm -55 to +85°C Number of Circuit: 1 c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2011.11.2 http://www.murata.com/