FDH/FDLL 300/A / 333 COLOR BAND MARKING 1ST BAND 2ND BAND FDLL300 FDLL300A BROWN BROWN GREEN YELLOW FDLL333 BROWN BLUE DEVICE LL-34 DO-35 THE PLACEMENT OF THE EXPANSION GAP HAS NO RELATIONSHIP TO THE LOCATION OF THE CATHODE TERMINAL High Conductance Low Leakage Diode Sourced from Process 1M. See MMBD1501/A-1505/A for characteristics. Absolute Maximum Ratings* Symbol TA = 25°C unless otherwise noted Parameter Value Units 125 V W IV Working Inverse Voltage IO Average Rectified Current 200 mA IF DC Forward Current 500 mA if Recurrent Peak Forward Current 600 mA if(surge) Tstg Peak Forward Surge Current Pulse width = 1.0 second Pulse width = 1.0 microsecond Storage Temperature Range 1.0 4.0 -65 to +200 A A °C TJ Operating Junction Temperature 175 °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 200 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD RθJA TA = 25°C unless otherwise noted Characteristic Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient ã 1997 Fairchild Semiconductor Corporation Max Units FDH/FDLL 300/A / 333 500 3.33 300 mW mW/°C °C/W FDH300/A / FDLL300/A / FDH333 / FDLL333 Discrete POWER & Signal Technologies (continued) Electrical Characteristics Symbol TA = 25°C unless otherwise noted Parameter BV Breakdown Voltage IR Reverse Current IR = 100 µA FDH/FDLL 300/A FDH/FDLL 333 VF Forward Voltage FDH/FDLL 300/A FDH/FDLL 300 FDH/FDLL 300A FDH/FDLL 300/A FDH/FDLL 300 FDH/FDLL 300A FDH/FDLL 300/A FDH/FDLL 300/A FDH/FDLL 333 CO Diode Capacitance Test Conditions Min Units 1.0 3.0 3.0 500 680 750 760 800 880 890 920 1.0 nA µA nA nA mV mV mV mV mV mV mV V 890 940 970 1.05 1.08 1.15 6.0 mV mV mV V V V pF 150 VR = 125 V VR = 125 V, TA = 150°C VR = 125 V VR = 125 V, TA = 100°C IF = 1.0 mA IF = 5.0 mA IF = 5.0 mA IF = 10 mA IF = 50 mA IF = 50 mA IF = 100 mA IF = 200 mA IF = 50 mA IF = 100 mA IF = 150 mA IF = 200 mA IF = 250 mA IF = 300 mA VR = 0, f = 1.0 MHz Max 800 830 860 0.87 0.88 0.9 V FDH300/A / FDLL300/A / FDH333 / FDLL333 High Conductance Low Leakage Diode TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.