PA1217 800-1000 MHz. Low Noise High Dynamic Range Linear Amplifier Features (typical values) Low Cost Ceramic Surface Mount Package Low NF ..................................................... 0.6 dB. IP3 ........................................................ +40 dBm Pout ......................................................... +25dBm Typical Value Parame te r Gain Flatness Reverse Isolation --u-- 25°C --n-- -40°C --∆-- +70°C M in. Value M ax. Value Units 800 1000 MHz 33 30 - dB +/- 0.5 - 1.0 dB 45.0 - - dB Frequency Gain @25 degrees C. Typical Performance G a in (d B ) v s . F re q u e n c y 35 34 33 32 800 900 1000 N F (d B ) v s . F re q u e n c y 1 0 .7 5 Pout @ 1dB. comp. 25 24 - dBm 0 .5 0 .2 5 Noise Figure 0.6 - 1.0 VSWR 1.6:1 - 2.0:1 40 37 - dBm +12V/155 - +12V/175 v./mA. Input IP3 Supply Required dB 800 900 1000 P o u t (d B m ) v s . F re q u e n c y 26 2 5 .5 25 2 4 .5 24 800 IP3 measured with 2 tones @+10 dB @ 1 Mhz apart Min and max values from -40 to +85 degrees C 900 1000 V S W R v s . F re q u e n c y 1 .7 1 .6 1 .5 1 .4 1 .3 1 .2 1 .1 1 Outline Drawings 800 900 1000 IP 3 ( d B m ) v s . F r e q u e n c y SEE ATTACHED DRAWING 4 1 .5 4 0 .5 3 9 .5 3 8 .5 800 900 1000 F re q u e n c y in M H z . Maximum Ratings Storage Temperature ....... -65°C to +150°C DC Voltage .................................. +15 volts RF Input Power .......................... +17 dBm. Heat Spreader Temperature .......... +100°C Rev: 08012001 Specifications subject to change without notice 100 Emlen Way Telford, Pa. 18969 Tel. (215) 723-6011 Fax. (215) 723-6015 PA1217 Page 2