VESD05A1B-02V Vishay Semiconductors Single ESD-Protection Diode in SOD-523 FEATURES • Single-line ESD-protection • Capacitance typical CD = 12 pF (VR = 2.5 V, f = 1 MHz) 2 1 • Leakage current IR < 1 µA (VR = 5 V) 20278 • ESD-protection acc. IEC 61000-4-2 ± 20 kV contact discharge ± 30 kV air discharge 19344 • e3 - Sn MARKING (example only) • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC XY 20279 Bar = cathode marking X = date code Y = type code (see table below) ORDERING INFORMATION DEVICE NAME VESD05A1B-02V ORDERING CODE TAPED UNITS PER REEL (8 mm TAPE ON 7" REEL) MINIMUM ORDER QUANTITY VESD05A1B-02V-G-08 3000 3000 PACKAGE DATA DEVICE NAME VESD05A1B-02V PACKAGE NAME TYPE CODE WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS SOD-523 .H 1.4 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS SYMBOL VALUE Peak pulse current acc. IEC 61000-4-5, 8/20 µs/single shot IPPM 3 A Peak pulse power acc. IEC 61000-4-5, 8/20 µs/single shot PPP 33 W ± 20 kV ± 30 kV TJ - 40 to + 125 °C Tstg - 55 to + 150 °C ESD immunity Operating temperature Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Junction temperature Storage temperature VESD UNIT ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 Document Number: 83368 Rev. 1.0, 08-Nov-10 For technical questions, contact: [email protected] www.vishay.com 1 VESD05A1B-02V Vishay Semiconductors Single ESD-Protection Diode in SOD-523 BiAs-MODE (bidirectional asymmetrical protection mode) With the VESD05A1B-02V one signal- or data-lines (L1) can be protected against voltage transients. With pin 1 connected to ground and pin 2 connected to a signal- or data-line which has to be protected. As long as the voltage level on the data- or signal-line is between 0 V (ground level) and the specified maximum reverse working voltage (VRWM) the protection diode between data line and ground offers a high isolation to the ground line. The protection device behaves like an open switch. As soon as any positive transient voltage signal exceeds the break through voltage level of the protection diode, the diode becomes conductive and shorts the transient current to ground. Now the protection device behaves like a closed switch. The clamping voltage (VC) is defined by the breakthrough voltage (VBR) level plus the voltage drop at the series impedance (resistance and inductance) of the protection device. Any negative transient signal will be clamped accordingly. The negative transient current is flowing in the forward direction of the protection diode. The low forward voltage (VF) clamps the negative transient close to the ground level. Due to the different clamping levels in forward and reverse direction the VESD05A1B-02V clamping behaviour is bidirectional and asymmetrical (BiAs). 2 L1 1 BiAs 20280 Ground ELECTRICAL CHARACTERISTICS VESD05A1B-02V PARAMETER Protection paths TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of lines which can be protected Nchannel - - 1 lines Reverse working voltage at IR = 1 µA VRWM 5 - - V Reverse current at VR = 5 V IR - 0.01 0.1 µA Reverse breakdown voltage at IR = 1 mA VBR 6 6.8 7.5 V - 8 9.5 V Reverse clamping voltage at IPP = 1 A at IPP = IPPM = 3 A VC at IPP = 0.2 A Forward clamping voltage at IPP = 1 A VF at IPP = IPPM = 3 A Capacitance at VR = 0 V; f = 1 MHz at VR = 2.5 V; f = 1 MHz CD - 8.9 11 V - 0.95 1.2 V - 1.3 - V - 1.9 - V - 19 23 pF - 12 - pF Note • Ratings at 25 °C, ambient temperature unless otherwise specified. BiAs mode (between pin 1 and pin 2). Document Number: 83368 Rev. 1.0, 08-Nov-10 For technical questions, contact: [email protected] www.vishay.com 2 VESD05A1B-02V Single ESD-Protection Diode in SOD-523 Vishay Semiconductors 0.7 (0.028) 1.7 (0.067) 0.9 (0.035) 1.5 (0.059) 0.7 (0.028) 0.5 (0.020) 0.1 (0.004) max. 0.08 (0.003) 0.20 (0.008) PACKAGE DIMENSIONS in millimeters (inches): SOD-523 1.3 (0.051) 1.1 (0.043) 0.4 (0.016) 0.35 (0.014) 0.18 (0.007) foot print recommendation: 1.45 (0.057) Document no.: S8-V-3880.02-001 (4) Rev. h - Date: 13. Oct. 2010 0.35 (0.014) 16864 Document Number: 83368 Rev. 1.0, 08-Nov-10 For technical questions, contact: [email protected] www.vishay.com 3 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000