195D www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT®, Conformal Coated FEATURES • 8 mm, 12 mm tape packaging to EIA-481 reeling per IEC 60286-3. 7" (178 mm) standard 13" (330 mm) available • US and European case sizes available • Mounting: Surface mount • Terminations: 100 % tin (2) standard, tin/lead available • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. PERFORMANCE/ELECTRICAL CHARACTERISTICS www.vishay.com/doc?40088 Capacitance Range: 0.1 μF to 330 μF Operating Temperature: - 55 °C to + 125 °C (above 85 °C, voltage derating is required) Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 2 VDC to 50 VDC ORDERING INFORMATION 195D 106 X0 004 S 2 T TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C CASE CODE TERMINATION PACKAGING This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % X5 = ± 5 % (Special order) This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes table Style 2 is standard 2 = 100 % tin 4 = Gold plated 8 = Solder plated (60/40) Special order T = Tape and reel 7" [178 mm] reel standard. For H case size lengthwise W = Tape and reel 13" [330 mm] reel available See Standard Packaging Quantity table Note • Preferred tolerance and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Revision: 08-Feb-13 Document Number: 40001 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 195D www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] Tantalum wire nib identifies anode (+) terminal W L B D REF. J MAX. J MAX. A H CASE CODE L W H A B C (MIN.) D (REF.) J (MAX.) STANDARD CASE CODES C 0.087 max. [2.21 max.] 0.045 ± 0.010 [1.14 ± 0.25] 0.045 ± 0.010 [1.14 ± 0.25] 0.016 ± 0.008 [0.40 ± 0.20] 0.042 ± 0.010 [1.07 ± 0.25] - 0.063 [1.60] 0.004 [0.10] S 0.143 max. [3.63 max.] 0.072 ± 0.008 [1.83 ± 0.20] 0.048 ± 0.008 [1.22 ± 0.20] 0.023 ± 0.010 [0.58 ± 0.25] 0.085 ± 0.015 [2.16 ± 0.37] - 0.114 [2.90] 0.004 [0.10] V 0.143 max. [3.63 max.] 0.104 ± 0.010 [2.65 ± 0.25] 0.051 ± 0.010 [1.30 ± 0.25] 0.023 ± 0.010 [0.58 ± 0.25] 0.085 ± 0.015 [2.16 ± 0.37] - 0.114 [2.90] 0.004 [0.10] X 0.285 max. [7.24 max.] 0.104 ± 0.010 [2.65 ± 0.25] 0.051 ± 0.010 [1.30 ± 0.25] 0.039 ± 0.020 [1.00 ± 0.50] 0.200 ± 0.027 [5.08 ± 0.69] - 0.244 [6.20] 0.004 [0.10] Y 0.285 max. [7.24 max.] 0.104 ± 0.010 [2.65 ± 0.25] 0.069 ± 0.010 [1.75 ± 0.25] 0.039 ± 0.020 [1.00 ± 0.50] 0.200 ± 0.027 [5.08 ± 0.69] - 0.244 [6.20] 0.004 [0.10] Z 0.285 max. [7.24 max.] 0.104 ± 0.010 [2.65 ± 0.25] 0.104 ± 0.010 [2.65 ± 0.25] 0.039 ± 0.020 [1.00 ± 0.50] 0.200 ± 0.027 [5.08 ± 0.69] - 0.244 [6.20] 0.004 [0.10] R 0.283 max. [7.20 max.] 0.236 + 0.012/- 0.024 [6.0 + 0.30/- 0.60] 0.138 ± 0.012 [3.50 ± 0.30] 0.051 ± 0.012 [1.30 ± 0.30] 0.181 ± 0.025 [4.60 ± 0.60] - 0.244 [6.20] 0.004 [0.10] A 0.110 ± 0.008 [2.80 ± 0.20] 0.0591 ± 0.012 [1.5 ± 0.30] 0.055 max. [1.40 max.] 0.028 ± 0.012 [0.70 ± 0.30] 0.063 ± 0.012 [1.60 ± 0.30] 0.012 [0.3] - - B 0.165 ± 0.008 [4.20 ± 0.20] 0.055 ± 0.012 [1.4 ± 0.30] 0.063 max. [1.6 max.] 0.031 ± 0.012 [0.80 ± 0.30] 0.098 ± 0.012 [2.50 ± 0.30] 0.012 [0.3] - - D 0.165 ± 0.008 [4.20 ± 0.20] 0.083 ± 0.012 [2.1 ± 0.30] 0.063 max. [1.6 max.] 0.031 ± 0.012 [0.80 ± 0.30] 0.098 ± 0.012 [2.50 ± 0.30] 0.02 [0.5] - - E 0.217 ± 0.012 [5.50 ± 0.30] 0.083 ± 0.012 [2.1 ± 0.30] 0.067 max. [1.70 max.] 0.039 ± 0.012 [1.00 ± 0.30] 0.126 ± 0.012 [3.20 ± 0.30] 0.031 [0.8] - - F 0.197 ± 0.012 [5.0 ± 0.30] 0.130 ± 0.012 [3.3 ± 0.30] 0.079 max. [2.00 max.] 0.039 ± 0.012 [1.00 ± 0.30] 0.142 ± 0.012 [3.60 ± 0.30] 0.031 [0.8] - - G 0.276 ± 0.012 [7.00 ± 0.30] 0.102 ± 0.012 [2.6 ± 0.30] 0.110 max. [2.80 max.] 0.039 ± 0.012 [1.00 ± 0.30] 0.177 ± 0.012 [4.5 ± 0.30] 0.031 [0.8] - - H 0.307 ± 0.012 [7.80 ± 0.30] 0.146 ± 0.012 [3.7 ± 0.30] 0.118 max. [3.0 max.] 0.039 ± 0.012 [1.00 ± 0.30] 0.197 ± 0.012 [5.00 ± 0.30] 0.031 [0.8] - - EUROPEAN CASE CODES Note • The anode termination (D less B) will be a minimum of 0.010" (0.25 mm), C case = 0.005" (0.131 mm) minimum Revision: 08-Feb-13 Document Number: 40001 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 195D www.vishay.com Vishay Sprague RATINGS AND CASE CODES μF 2V 4V 6.3 V 10 V 15 V 16 V 20 V 25 V 0.10 0.15 0.22 S 0.33 35 V 40 V 50 V A A A/C A A A/C A A B/C/S A B/C B B/S 0.47 A A A C B/S B D/V 0.68 A A C B/S D/S D D/V A/S B B/C B/S S D/S D E/X A C B B/S S D/S E/V E F/X A C B/S S D/S E/V F/X F F/Y 1.0 1.5 2.2 3.3 A C B/S S D D/S E/V X F/Y F G/Z 4.7 A B/S S D/S E E/V X F/X G/Z G H/Z 6.8 A S D/S E/V X F/X G/Y H/Z H R 10 A D/S E/V X F/X Y G/Y Z E/V X F/X Y G/Z H/Z R 22 X F/X Y G G/Y/Z H/Z R R 33 F/X Y G/Z H H/Z R R 47 Y G/Y H/Z R R R 15 68 G/Y H/Z R 100 H/Z Z H/R 120 R R R 150 R R R 180 R R 220 R R 330 R F R STANDARD RATINGS CAPACITANCE (μF) CASE CODE 3.3 4.7 6.8 10 A A A A PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 0.5 0.5 0.5 0.6 8 8 8 8 2 VDC AT + 85 °C, 1.2 VDC AT + 125 °C 195D335(1)002A(2)(3) 195D475(1)002A(2)(3) 195D685(1)002A(2)(3) 195D106(1)002A(2)(3) 4 VDC AT + 85 °C, 2.7 VDC AT + 125 °C 2.2 A 195D225(1)004A(2)(3) 0.5 8 3.3 C 195D335(1)004C(2)(3) 0.5 6 4.7 B 195D475(1)004B(2)(3) 0.5 8 4.7 S 195D475(1)004S(2)(3) 0.5 6 6.8 S 195D685(1)004S(2)(3) 0.5 6 10 D 195D106(1)004D(2)(3) 0.5 8 10 S 195D106(1)004S(2)(3) 0.5 6 15 E 195D156(1)004E(2)(3) 0.6 8 15 V 195D156(1)004V(2)(3) 0.6 6 22 X 195D226(1)004X(2)(3) 0.9 6 Note • Part number definitions: (1) Tolerance: For 10 % tolerance, specify “X9”, for 20 % tolerance, change to “X0” (2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8” (3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W” Revision: 08-Feb-13 Document Number: 40001 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 195D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 33 33 47 68 68 100 100 120 150 180 220 330 F X Y G Y H Z R R R R R 1.5 2.2 3.3 3.3 4.7 6.8 6.8 10 10 15 22 22 33 47 47 68 68 100 120 150 180 220 A C B S S D S E V X F X Y G Y H Z Z R R R R 0.22 1.0 1.0 1.5 2.2 2.2 3.3 4.7 4.7 6.8 6.8 S A S C B S S D S E V PART NUMBER 4 VDC AT + 85 °C, 2.7 VDC AT + 125 °C 195D336(1)004F(2)(3) 195D336(1)004X(2)(3) 195D476(1)004Y(2)(3) 195D686(1)004G(2)(3) 195D686(1)004Y(2)(3) 195D107(1)004H(2)(3) 195D107(1)004Z(2)(3) 195D127(1)004R(2)(3) 195D157(1)004R(2)(3) 195D187(1)004R(2)(3) 195D227(1)004R(2)(3) 195D337(1)004R(2)(3) 6.3 VDC AT + 85 °C, 4 VDC AT + 125 °C 195D155(1)6R3A(2)(3) 195D225(1)6R3C(2)(3) 195D335(1)6R3B(2)(3) 195D335(1)6R3S(2)(3) 195D475(1)6R3S(2)(3) 195D685(1)6R3D(2)(3) 195D685(1)6R3S(2)(3) 195D106(1)6R3E(2)(3) 195D106(1)6R3V(2)(3) 195D156(1)6R3X(2)(3) 195D226(1)6R3F(2)(3) 195D226(1)6R3X(2)(3) 195D336(1)6R3Y(2)(3) 195D476(1)6R3G(2)(3) 195D476(1)6R3Y(2)(3) 195D686(1)6R3H(2)(3) 195D686(1)6R3Z(2)(3) 195D107(1)6R3Z(2)(3) 195D127(1)6R3R(2)(3) 195D157(1)6R3R(2)(3) 195D187(1)6R3R(2)(3) 195D227(1)6R3R(2)(3) 10 VDC AT + 85 °C, 7 VDC AT + 125 °C 195D224(1)010S(2)(3) 195D105(1)010A(2)(3) 195D105(1)010S(2)(3) 195D155(1)010C(2)(3) 195D225(1)010B(2)(3) 195D225(1)010S(2)(3) 195D335(1)010S(2)(3) 195D475(1)010D(2)(3) 195D475(1)010S(2)(3) 195D685(1)010E(2)(3) 195D685(1)010V(2)(3) MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 1.3 1.3 1.9 2.7 2.7 4.0 4.0 4.8 6.0 7.2 8.8 13.2 8 6 6 8 6 8 8 8 8 8 8 8 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.9 1.3 1.3 2.0 2.8 2.8 4.1 4.1 6.0 7.2 9.0 10.8 13.2 8 6 8 6 6 8 6 8 6 6 8 6 6 8 6 8 6 8 8 8 8 8 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 4 6 6 6 6 6 6 6 6 6 6 Note • Part number definitions: (1) Tolerance: For 10 % tolerance, specify “X9”, for 20 % tolerance, change to “X0” (2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8” (3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W” Revision: 08-Feb-13 Document Number: 40001 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 195D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 10 15 15 22 33 33 47 47 68 100 100 120 150 X F X Y G Z H Z R H R R R 0.47 0.68 1.0 1.5 3.3 4.7 10 22 33 A A B B D E F G H 0.47 0.68 1.0 1.0 1.5 1.5 2.2 3.3 3.3 4.7 4.7 6.8 10 10 15 22 22 22 33 33 47 68 A A B C B S S D S E V X F X Y G Y Z H Z R R PART NUMBER 10 VDC AT + 85 °C, 7 VDC AT + 125 °C 195D106(1)010X(2)(3) 195D156(1)010F(2)(3) 195D156(1)010X(2)(3) 195D226(1)010Y(2)(3) 195D336(1)010G(2)(3) 195D336(1)010Z(2)(3) 195D476(1)010H(2)(3) 195D476(1)010Z(2)(3) 195D686(1)010R(2)(3) 195D107(1)010H(2)(3) 195D107(1)010R(2)(3) 195D127(1)010R(2)(3) 195D157(1)010R(2)(3) 15 VDC AT + 85 °C, 10 VDC AT + 125 °C 195D474(1)015A(2)(3) 195D684(1)015A(2)(3) 195D105(1)015B(2)(3) 195D155(1)015B(2)(3) 195D335(1)015D(2)(3) 195D475(1)015E(2)(3) 195D106(1)015F(2)(3) 195D226(1)015G(2)(3) 195D336(1)015H(2)(3) 16 VDC AT + 85 °C, 10 VDC AT + 125 °C 195D474(1)016A(2)(3) 195D684(1)016A(2)(3) 195D105(1)016B(2)(3) 195D105(1)016C(2)(3) 195D155(1)016B(2)(3) 195D155(1)016S(2)(3) 195D225(1)016S(2)(3) 195D335(1)016D(2)(3) 195D335(1)016S(2)(3) 195D475(1)016E(2)(3) 195D475(1)016V(2)(3) 195D685(1)016X(2)(3) 195D106(1)016F(2)(3) 195D106(1)016X(2)(3) 195D156(1)016Y(2)(3) 195D226(1)016G(2)(3) 195D226(1)016Y(2)(3) 195D226(1)016Z(2)(3) 195D336(1)016H(2)(3) 195D336(1)016Z(2)(3) 195D476(1)016R(2)(3) 195D686(1)016R(2)(3) MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 1.0 1.5 1.5 2.2 3.3 3.0 4.7 4.7 6.8 8.0 10.0 12.0 15.0 6 6 6 6 6 6 6 6 6 7 8 8 8 0.5 0.5 0.5 0.5 0.5 0.7 1.5 3.3 5.0 6 6 6 6 6 6 6 6 6 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 1.0 1.5 1.5 2.3 3.3 3.2 3.3 5.0 5.0 7.1 10.2 6 6 6 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Note • Part number definitions: (1) Tolerance: For 10 % tolerance, specify “X9”, for 20 % tolerance, change to “X0” (2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8” (3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W” Revision: 08-Feb-13 Document Number: 40001 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 195D www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) CAPACITANCE (μF) CASE CODE 0.47 A 195D474(1)020A(2)(3) 0.5 6 0.68 C 195D684(1)020C(2)(3) 0.5 4 1.0 B 195D105(1)020B(2)(3) 0.5 6 1.0 S 195D105(1)020S(2)(3) 0.5 4 1.5 S 195D155(1)020S(2)(3) 0.5 6 2.2 D 195D225(1)020D(2)(3) 0.5 6 2.2 S 195D225(1)020S(2)(3) 0.5 6 3.3 E 195D335(1)020E(2)(3) 0.7 6 3.3 V 195D335(1)020V(2)(3) 0.7 6 4.7 X 195D475(1)020X(2)(3) 0.9 6 PART NUMBER 20 VDC AT + 85 °C, 13 VDC AT + 125 °C 6.8 F 195D685(1)020F(2)(3) 1.4 6 6.8 X 195D685(1)020X(2)(3) 1.4 6 10 Y 195D106(1)020Y(2)(3) 2.0 6 15 G 195D156(1)020G(2)(3) 3.0 6 15 Z 195D156(1)020Z(2)(3) 3.0 6 22 H 195D226(1)020H(2)(3) 4.4 6 22 Z 195D226(1)020Z(2)(3) 4.4 6 33 R 195D336(1)020R(2)(3) 6.6 6 47 R 195D476(1)020R(2)(3) 9.4 6 25 VDC AT + 85 °C, 17 VDC AT + 125 °C 0.33 A 195D334(1)025A(2)(3) 0.5 6 0.47 C 195D474(1)025C(2)(3) 0.5 4 0.68 B 195D684(1)025B(2)(3) 0.5 6 0.68 S 195D684(1)025S(2)(3) 0.5 4 1.0 S 195D105(1)025S(2)(3) 0.5 4 1.5 D 195D155(1)025D(2)(3) 0.5 6 1.5 S 195D155(1)025S(2)(3) 0.5 6 2.2 E 195D225(1)025E(2)(3) 0.6 6 2.2 V 195D225(1)025V(2)(3) 0.6 6 3.3 X 195D335(1)025X(2)(3) 0.8 6 4.7 F 195D475(1)025F(2)(3) 1.2 6 4.7 X 195D475(1)025X(2)(3) 1.2 6 6.8 G 195D685(1)025G(2)(3) 1.7 6 6.8 Y 195D685(1)025Y(2)(3) 1.7 6 10 G 195D106(1)025G(2)(3) 2.5 6 10 Y 195D106(1)025Y(2)(3) 2.5 6 15 H 195D156(1)025H(2)(3) 3.8 6 15 Z 195D156(1)025Z(2)(3) 3.8 6 22 R 195D226(1)025R(2)(3) 5.5 6 33 R 195D336(1)025R(2)(3) 8.3 6 Note • Part number definitions: (1) Tolerance: For 10 % tolerance, specify “X9”, for 20 % tolerance, change to “X0” (2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8” (3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W” Revision: 08-Feb-13 Document Number: 40001 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 195D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 0.10 0.15 0.22 0.33 0.33 0.47 0.47 0.68 0.68 1.0 1.0 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10 15 22 A A A B C B S D S D S E V F X F Y G Z H Z Z R R 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 A A A B B D D E F F G H 0.10 0.10 0.15 0.15 0.22 0.22 0.22 0.33 0.33 A C A C B C S B S PART NUMBER MAX. DCL AT + 25 °C (μA) 35 VDC AT + 85 °C, 23 VDC AT + 125 °C 195D104(1)035A(2)(3) 195D154(1)035A(2)(3) 195D224(1)035A(2)(3) 195D334(1)035B(2)(3) 195D334(1)035C(2)(3) 195D474(1)035B(2)(3) 195D474(1)035S(2)(3) 195D684(1)035D(2)(3) 195D684(1)035S(2)(3) 195D105(1)035D(2)(3) 195D105(1)035S(2)(3) 195D155(1)035E(2)(3) 195D155(1)035V(2)(3) 195D225(1)035F(2)(3) 195D225(1)035X(2)(3) 195D335(1)035F(2)(3) 195D335(1)035Y(2)(3) 195D475(1)035G(2)(3) 195D475(1)035Z(2)(3) 195D685(1)035H(2)(3) 195D685(1)035Z(2)(3) 195D106(1)035Z(2)(3) 195D156(1)035R(2)(3) 195D226(1)035R(2)(3) 40 VDC AT + 85 °C, 23 VDC TO 25 VDC AT + 125 °C 195D104(1)040A(2)(3) 195D154(1)040A(2)(3) 195D224(1)040A(2)(3) 195D334(1)040B(2)(3) 195D474(1)040B(2)(3) 195D684(1)040D(2)(3) 195D105(1)040D(2)(3) 195D155(1)040E(2)(3) 195D225(1)040F(2)(3) 195D335(1)040F(2)(3) 195D475(1)040G(2)(3) 195D685(1)040H(2)(3) 50 VDC AT + 85 °C, 33 VDC AT + 125 °C 195D104(1)050A(2)(3) 195D104(1)050C(2)(3) 195D154(1)050A(2)(3) 195D154(1)050C(2)(3) 195D224(1)050B(2)(3) 195D224(1)050C(2)(3) 195D224(1)050S(2)(3) 195D334(1)050B(2)(3) 195D334(1)050S(2)(3) MAX. DF AT + 25 °C 120 Hz (%) 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 1.2 1.2 1.6 1.6 2.4 2.4 3.5 5.3 7.7 6 6 6 6 4 6 4 6 4 6 4 6 6 6 6 6 6 6 6 6 6 6 6 6 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 1.2 1.6 2.4 6 6 6 6 6 6 6 6 6 6 6 6 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 6 4 6 4 6 4 4 6 4 Note • Part number definitions: (1) Tolerance: For 10 % tolerance, specify “X9”, for 20 % tolerance, change to “X0” (2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8” (3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W” Revision: 08-Feb-13 Document Number: 40001 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 195D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 50 VDC AT + 85 °C, 33 VDC AT + 125 °C 0.47 D 195D474(1)050D(2)(3) 0.5 6 0.47 V 195D474(1)050V(2)(3) 0.5 4 0.68 D 195D684(1)050D(2)(3) 0.5 6 0.68 V 195D684(1)050V(2)(3) 0.5 4 1.0 E 195D105(1)050E(2)(3) 0.5 6 1.0 X 195D105(1)050X(2)(3) 0.5 4 1.5 F 195D155(1)050F(2)(3) 0.8 6 1.5 X 195D155(1)050X(2)(3) 0.8 6 6 2.2 F 195D225(1)050F(2)(3) 1.1 2.2 Y 195D225(1)050Y(2)(3) 1.1 6 3.3 G 195D335(1)050G(2)(3) 1.7 6 6 3.3 Z 195D335(1)050Z(2)(3) 1.7 4.7 H 195D475(1)050H(2)(3) 2.4 6 4.7 Z 195D475(1)050Z(2)(3) 2.4 6 6.8 R 195D685(1)050R(2)(3) 3.4 6 10 R 195D106(1)050R(2)(3) 5.0 6 Note • Part number definitions: (1) Tolerance: For 10 % tolerance, specify “X9”, for 20 % tolerance, change to “X0” (2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8” (3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W” RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperature below + 85 °C) STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS Capacitor Voltage Rating Operating Voltage 2.0 1.2 4.0 2.5 6.3 3.6 10 6 15/16 9 20 12 25 15 35 24 40 26 50 28 SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS Revision: 08-Feb-13 Capacitor Voltage Rating Operating Voltage 2.0 1.0 4.0 2.5 6.3 3.3 10 5.0 15/16 7.5 20 10 25 12 35 15 40 20 50 24 Document Number: 40001 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 195D www.vishay.com Vishay Sprague TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY “S” Case “V” Case 1000 IMPEDANCE ESR IMPEDANCE ESR 100 100 10 0.47 μF - 50 VDC 10 Ω Ω 1 μF - 35 VDC 4.7 μF - 10 VDC 1 1 15 μF - 4 VDC 0.1 0.1 1K 10K 100K 1M 10M 100M 1K 10K 100K FREQUENCY IN Hz 1M 10M 100M FREQUENCY IN Hz “X” Case “Y” Case 1000 100 IMPEDANCE ESR IMPEDANCE ESR 100 10 22 μF - 10 VDC Ω Ω 10 6.8 μF - 20 VDC 1 1 0.1 0.1 10 μF - 16 VDC 47 μF - 6.3 VDC 0.01 100 1K 10K 100K 1M 0.01 10M 1K 100 FREQUENCY IN Hz 10K 100K FREQUENCY IN Hz 1M 10M “Z” Case 100 IMPEDANCE ESR Ω 10 4.7 μF - 50 VDC 1 0.1 100 μF - 6.3 VDC 0.01 100 1K 10K 100K 1M 10M FREQUENCY IN Hz Revision: 08-Feb-13 Document Number: 40001 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 195D www.vishay.com Vishay Sprague POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR A 0.040 B 0.050 C 0.030 D 0.080 E 0.090 F 0.110 G 0.120 H 0.140 R 0.250 S 0.080 V 0.095 X 0.110 Y 0.120 Z 0.135 STANDARD PACKAGING QUANTITY CASE CODE UNITS PER REEL 7" REEL 13" REEL A 2500 n/a B 2000 n/a C 2500 10 000 D 2000 n/a E 2000 n/a n/a F 700 G 1400 n/a H 400 n/a R 600 n/a S 2500 10 000 V 2500 10 000 X 200 10 000 Y 1500 7500 Z 1500 5000 PRODUCT INFORMATION Conformal Coated Guide www.vishay.com/doc?40150 Moisture Sensitivity www.vishay.com/doc?40135 SELECTOR GUIDES Solid Tantalum Selector Guide www.vishay.com/doc?49053 Solid Tantalum Chip Capacitors www.vishay.com/doc?40091 FAQ Frequently Asked Questions Revision: 08-Feb-13 www.vishay.com/doc?40110 Document Number: 40001 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000