TLP629,TLP629−2,TLP629−4 TOSHIBA Photocoupler GaAs Ired & Photo−Transistor TLP629,TLP629−2,TLP629−4 Telecommunication Office Machine Telephone Use Equipment Unit in mm The TOSHIBA TLP629, −2, and −4 consists of a photo−transistor optically coupled to a gallium arsenide infrared emitting diode. The TLP629−2 offers two isolated channels in an eight lead plastic DIP, while the TLP629−4 provides four isolated channels in a sixteen plastic DIP. This is suitable for application of DC input current up to 150mA. • IF maximum rating: 150mA • Collector−emitter voltage: 55V (min.) • Current transfer ratio: 25% (min.) (IF=20mA) • Isolation voltage: 5000Vrms (min.) • UL recognized: UL1577, file no. E67349 • BSI approved: BS EN60065:2002, certificate no.7426 BS EN60950-1:2002, certificate no.7427 TOSHIBA 11−5B2 Weight: 0.26 g Pin Configurations (top view) TOSHIBA 11−10C4 Weight: 0.54 g TOSHIBA 11−20A3 Weight: 1.1 g 1 2007-10-01 TLP629,TLP629−2,TLP629−4 Absolute Maximum Ratings (Ta = 25°C) Characteristic Forward current LED TLP629 Unit TLP629−2,4 IF 150 mA ΔIF / °C −1.5 (Ta ≥ 25°C) mA / °C Pulse forward current IFP 1 (100μs pulse, 100pps) A Reverse voltage VR 5 V Junction temperature Tj 125 °C Collector−emitter voltage VCEO 55 V Emitter−collector voltage VECO 7 V Collector current IC 80 mA Collector power dissipation (1 circuit) PC 150 100 mW ΔPC / °C −1.5 −1.0 mW / °C Forward current derating Detector Rating Symbol Collector power dissipation derating (1 circuit, Ta ≥ 25°C) Junction temperature Tj 125 °C Storage temperature range Tstg −55~125 °C Operating temperature range Topr −55~100 °C Lead soldering temperature Tsol 260 (10s) °C Total package power dissipation PT 250 200 mW ΔPT / °C −2.5 2.0 mW / °C Total package power dissipation derating (Ta≥25°C) Isolation voltage (Note 1) BVS 5000 (AC, 1min., RH ≤ 60%) Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 1) Device considered a two terminal: LED side pins shorted together, and detector side pins shorted together. Recommended Operating Conditions Characteristics Symbol Min. Supply voltage VCC ― 5 24 V Forward current IF ― 20 120 mA Collector current IC ― 1 10 mA Topr −25 ― 85 °C Operating temperature Typ. Max. Unit Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2007-10-01 TLP629,TLP629−2,TLP629−4 Individual Electrical Characteristics (Ta = 25°C) Detector LED Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward voltage VF IF = 100 mA — 1.4 1.7 V Forward current IF VF = 0.7 V — 2.5 20 μA Reverse current IR VR = 5 V — — 10 μA Capacitance CT V = 0, f = 1 MHz — 50 — pF Collector−emitter breakdown voltage V(BR) CEO IC = 0.5 mA 55 — — V Emitter−collector breakdown voltage V(BR) ECO IE = 0.1 mA 7 — — V VCE = 24 V — 10 100 nA VCE = 24 V, Ta = 85°C — 2 50 μA V = 0, f = 1 MHz — 10 — pF MIn. Typ. Max. Unit Collector dark current ICEO Capacitance collector to emitter CCE Coupled Electrical Characteristics (Ta = 25°C) Characteristic Current transfer ratio Collector−emitter saturation voltage Off−state collector current Symbol Test Condition IC / IF IF = 20 mA, VCE = 1 V 25 — — IC / IF (high) IF = 100 mA, VCE = 1 V 20 — 80 IC = 2.4 mA, IF = 20 mA — — 0.4 IC = 2.4 mA, IF = 100 mA — — 0.4 VF = 0.7V, VCEO = 24 V — 1 1.0 μA Min. Typ. Max. Unit — 0.8 — pF — Ω VCE (sat) IC(off) % V Isolation Characteristics (Ta = 25°C) Characteristic Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0, f = 1 MHz VS = 500 V AC, 1 minute Isolation voltage BVS 10 5×10 10 14 5000 — — AC, 1 second, in oil — 10000 — DC, 1 minute, in oil — 10000 — 3 Vrms Vdc 2007-10-01 TLP629,TLP629−2,TLP629−4 Switching Characteristics (Ta = 25°C) Characteristic Symbol Rise time tr Fall time tf Turn−on time ton Test Condition VCC = 10 V, IC = 2 mA RL = 100Ω Min. Typ. Max. — 2 — — 3 — — 3 10 Turn−off time toff — 3 10 Turn−on time tON — 2 — — 15 — — 25 — Storage time ts Turn−off time tOFF RL = 1.9 kΩ VCC = 5 V, IF = 16 mA (Fig.1) Unit μs μs Fig. 1 Switching time test circuit 4 2007-10-01 TLP629,TLP629−2,TLP629−4 5 2007-10-01 TLP629,TLP629−2,TLP629−4 6 2007-10-01 TLP629,TLP629−2,TLP629−4 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2007-10-01