TLP180 TOSHIBA Photocoupler GaAs Ired & Photo−Transistor TLP180 Programmable Controllers AC / DC−Input Module Telecommunication Unit in mm The TOSHIBA mini flat coupler TLP180 is a small outline coupler, suitable for surface mount assembly. TLP180 consist of a photo transistor, optically coupled to a gallium arsenide infrared emitting diode connected inverse parallel, and can operate directly by AC input current. • Collector−emitter voltage: 80 V (min.) • Current transfer ratio: 50% (min.) Rank GB: 100% (min.) • Isolation voltage: 3750Vrms (min.) • UL recognized: UL1577, file No. E67349 • BSI approved: BS EN60065:2002, certificate no.8285 BS EN60950-1:2002, certificate no.8286 TOSHIBA Weight: 0.09 g 11−4C1 Pin Configuration (top view) 1 6 3 4 1: Anode, Cathode 3: Cathode, Anode 4: Emitter 6: Collector 1 2007-10-01 TLP180 Absolute Maximum Ratings (Ta = 25°C) LED Characteristic Symbol Rating Unit Forward current IF(RMS) ±50 mA Forward current detating (Ta≥53°C) ΔIF / °C −0.7 mA / °C IFP ±1 A Tj 125 °C Collector−emitter voltage VCEO 80 V Emitter−collector voltage VECO 7 V IC 50 mA Pulse forward current (Note1) Detector Junction temperature Collector current Power dissipation PC 150 mW ΔPC / °C −1.5 mW / °C Tj 125 °C Storage temperature range Tstg −55~125 °C Operating temperature range Topr −55~100 °C Lead soldering temperature(10s) Tsol 260 °C Total package power dissipation PT 200 mW ΔPT / °C −2.0 mW / °C BVS 3750 Vrms Power dissipation derating (Ta ≥ 25°C) Junction temperature Total package power dissipation derating (Ta ≥ 25°C) Isolation voltage (AC,1min.,R.H. ≤ 60%) (Note 2) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pulse width ≤ 100μs,f=100Hz Note 2: Device considered a two terminal device: Pins 1 and 3 shorted together and 4 and 6 shorted together. Recommended Operating Conditions Characteristic Symbol Min. Typ. Max. Unit Supply voltage VCC ― 5 48 V Forward current IF(RMS) ― 16 20 mA Collector current IC ― 1 10 mA Topr −25 ― 85 °C Operating temperature Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2007-10-01 TLP180 Electrical Characteristics (Ta = 25°C) Detector LED Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward voltage VF IF = ±10 mA 1.0 1.15 1.3 V Capacitance CT V = 0, f = 1 MHz ― 60 ― pF Collector−emitter breakdown voltage V(BR) CEO IC = 0.5 mA 80 ― ― V Emitter−collector breakdown voltage V(BR) ECO IE = 0.1 mA 7 ― ― V ― 0.01 (2) 0.1 (10) μA ― 2 (4) 50 (50) μA ― 10 ― pF MIn. Typ. Max. Unit 50 — 600 100 — 600 Collector dark current ICEO Capacitance (collector to emitter) CCE VCE = 48 V (ambient light below 1000Lx) (Note3) VCE = 48 V (ambient light Ta = 85°C below 1000Lx) (Note3) V = 0, f = 1 MHz Note 3: Please use standard electric lamp to light up the device's marking surface. Coupled Electrical Characteristics (Ta = 25°C) Characteristic Symbol Current transfer ratio IC / IF Saturated CTR IC / IF (sat) Collector−emitter saturation voltage VCE (sat) Off−state collector current IC(off) CTR symmetry IC (ratio) Test Condition IF = ±5 mA, VCE = 5 V Rank GB % IF = ±1 mA, VCE = 0.4 V Rank GB — 60 — 30 — — IC = 2.4 mA, IF = ±8 mA — — 0.4 IC = 0.2 mA, IF = ±1 mA Rank GB — 0.2 — — — 0.4 VF = ± 0.7V, VCE = 48 V — 1 10 μA 0.33 1 3 — IC (IF = −5mA) / IC (IF = 5mA) (Note4) % V I (I = I , V = 5V) Note 4 : IC(ratio)= C2 F F2 CE IC1(IF = IF1, VCE = 5V) IC1 IF1 VCE IC2 IF2 3 2007-10-01 TLP180 Isolation Characteristics (Ta = 25°C) Characteristic Symbol Capacitance input to output CS Isolation resistance RS Test Condition VS = 0V, f = 1 MHz VS = 500 V, R.H. ≤ 60% BVS Typ. Max. Unit ― 0.8 ― pF ― Ω 5×10 AC, 1 minute Isolation voltage Min. 10 10 14 3750 ― ― AC, 1 second, in oil ― 10000 ― DC, 1 minute, in oil ― 10000 ― Vdc Min. Typ. Max. Unit ― 2 ― ― 3 ― ― 3 ― ― 3 ― ― 2 ― ― 25 ― ― 40 ― Vrms Switching Characteristics (Ta = 25°C) Characteristic Symbol Rise time tr Fall time tf Turn−on time ton Turn−off time toff Turn−on time tON Storage time ts Turn−off time tOFF Test Condition VCC = 10 V, IC = 2 mA RL = 100Ω RL = 1.9 kΩ VCC = 5 V, IF = ±16 mA (Fig.1) μs μs Fig. 1: Switching time test circuit IF RL IF VCC tS VCE VCE VCC 4.5V 0.5V tON 4 tOFF 2007-10-01 TLP180 IF – Ta PC – Ta 200 Allowable collector power dissipation PC (mW) Allowable forward current IF (mA) 100 80 160 120 60 40 20 0 −20 0 20 40 60 80 100 80 40 0 −20 120 0 20 Ambient temperature Ta (°C) 40 120 100 width ≤ 100μs Ta = 25°C IF (mA) 500 300 Forward current Pulse forward current IFP (mA) 100 IF – VF Pulse 1000 100 50 30 10 3 80 Ambient temperature Ta (°C) IFP – DR 3000 60 10 −3 3 10 −2 Duty cycle 3 10 −1 3 10 10 1 0.1 0.01 0 85°C ratio DR 0.001 0 25 °C 0.4 −25°C 0.8 Forward 1.2 1.6 2 voltage VF (V) 25 °C ΔVF / ΔTa – IF IFP – VFP 1000 Pulse forward current IFP (mA) Forward voltage temperature coefficient ΔVF / ΔTa (mV / °C) −3.2 −2.8 −2.4 −2.0 −1.6 −1.2 −0.8 500 300 100 50 30 10 Pulse 5 width ≤ 10μs Repetitive 3 frequency = 100Hz Ta = 25°C −0.4 0.1 0.3 0.5 1 3 Forward current 5 10 30 1 0.6 50 IF (mA) 1.0 1.4 Pulse forward 5 1.8 2.2 voltage 2.6 3.0 VFP (V) 2007-10-01 TLP180 IC – VCE IC – VCE 50 30 Ta = 25°C Ta = 25°C 50mA Collector current IC (mA) 40 Collector current IC (mA) 50mA 30mA 20mA 15mA 30 10mA PC(MAX.) 20 IF = 5mA 10 40mA 30mA 20 20mA 10mA 10 5mA 2mA 0 0 2 4 6 8 Collector-emitter voltage 0 0 10 VCE (V) 0.2 0.4 Collector dark current ID(ICEO) (μA) Collector current IC (mA) 50 30 Sample A 5 3 Sample B 1 0.5 VCE = 10V 0.3 VCE = 5V 0.1 0.1 VCE = 0.4V 0.3 0.5 1 3 Forward 5 current 10 30 50 IF (mA) 10 10 VCE (V) 10 10 IC / IF – IF 1 0 −1 VCE = 48V 24V 10 1000 1.0 ICEO – Ta 10 Ta = 25°C 10 0.8 Collector-emitter voltage IC – IF 100 0.6 10V −2 5V −3 −4 0 20 40 60 80 100 Ambient temperature Ta (°C) Ta = 25°C 300 (%) Sample A IC / IF Current transfer ratio 500 100 Sample B 50 30 VCE = 10V VCE = 5V VCE = 0.4V 10 0.1 0.3 0.5 1 Forward 3 current 5 10 30 50 IF (mA) 6 2007-10-01 TLP180 VCE(sat) – Ta IC – Ta 0.24 100 IF = 1mA 0.20 Collector current IC (mA) Collector-emitter saturation voltage VCE(sat) (V) IC = 0.2mA 0.16 IF = 5mA, IC = 1mA 0.12 IF = 1mA, IC = 0.2mA 0.08 0.04 VCE = 5V 50 IF = 25mA 30 10mA 5mA 10 5 3 1mA 0 −40 1 −20 0 20 Ambient 40 temperature 60 80 Ta (°C) 100 0.5 0.5mA 0.3 0.1 Switching 1000 Time – RL −20 0 20 40 60 80 100 Ambient temperature Ta (°C) Ta = 25°C IF = 16mA 500 VCC = 5V Switching 300 Time – Ta 160 tOFF 50 100 tOFF 30 50 (μs) ts 30 Switching time Switching time (μs) ts 10 10 5 3 tON 1 5 0.5 3 0.3 IF = 16mA tON 1 1 VCC = 5V 0.1 3 Load 5 10 resistance RL 30 50 100 RL = 1.9kΩ −20 0 20 40 60 80 100 Ambient temperature Ta (°C) (kΩ) 7 2007-10-01 TLP180 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 8 2007-10-01