TD62081~084AP/CP/F/AF TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TD62081AP,TD62081CP,TD62081F,TD62081AF,TD62082AP,TD62082CP TD62082F,TD62082AF,TD62083AP,TD62083CP,TD62083F,TD62083AF TD62084AP,TD62084CP,TD62084F,TD62084AF 8CH DARLINGTON SINK DRIVER The TD62081AP / CP / F / AF Series are high−voltage, high−current darlington drivers comprised of eight NPN darlington pairs. All units feature integral clamp diodes for switching inductive loads. Applications include relay, hammer, lamp and display (LED) drivers. FEATURES l Output current (single output) 500 mA (Max.) (TD62081AP / F / AF series) 400 mA (Max.) (TD62081CP series) l High sustaining voltage output 35 V (Min.) (TD62081F series) 50 V (Min.) (TD62081AP / AF series) 100 V (Min.) (TD62081CP series) l Output clamp diodes l Inputs compatible with various types of logic. l Package type−AP, CP : DIP−18 pin l Package type−F, AF : SOP−18 pin Weight DIP18−P−300−2.54D : 1.478 g (Typ.) SOP18−P−375−1.27 : 0.41 g (Typ.) TYPE INPUT BASE RESISTOR DESIGNATION TD62081AP / CP / F / AF External General Purpose TD62082AP / CP / F / AF 10.5−kΩ + 7 V Zenner diode 14~25 V PMOS TD62083AP / CP / F / AF 2.7 kΩ TTL, 5 V CMOS TD62084AP / CP / F / AF 10.5 kΩ 6~15 V PMOS, CMOS PIN CONNECTION (TOP VIEW) 1 2001-06-28 TD62081~084AP/CP/F/AF SCHEMATICS (EACH DRIVER) TD62081AP / CP / F / AF TD62082AP / CP / F / AF TD62083AP / CP / F / AF TD62084AP / CP / F / AF Note: The input and output parasitic diodes cannot be used as clamp diodes. MAXIMUM RATINGS (Ta = 25°C) CHARACTERISTIC SYMBOL AP, AF Output Sustaining Voltage CP CP UNIT −0.5~50 VCE (SUS) F Output Current RATING −0.5~100 V −0.5~35 IOUT 500 400 mA / ch Input Voltage VIN (Note 1) −0.5~30 V Input Current IIN (Note 2) 25 mA AP, AF Clamp Diode Reverse Voltage CP 50 VR F Clamp Diode Forward Current Power Dissipation CP AP, CP F, AF 100 V 35 IF PD 500 400 1.47 0.96 mA W Operating Temperature Topr −40~85 °C Storage Temperature Tstg −55~150 °C Note 1: Except TD62081AP / CP / F / AF Note 2: Only TD62081AP / CP / F / AF 2 2001-06-28 TD62081~084AP/CP/F/AF RECOMMENDED OPERATING CONDITIONS (Ta = −40~85°C) CHARACTERISTIC SYMBOL TEST CONDITION MIN TYP. MAX 0 ― 50 0 ― 100 0 ― 35 Tpw = 25 ms, Duty = 10% 8 Circuits 0 ― 347 Tpw = 25 ms, Duty = 50% 8 Circuits 0 ― 123 Tpw = 25 ms, Duty = 10% 8 Circuits 0 ― 268 Tpw = 25 ms, Duty = 50% 8 Circuits 0 ― 90 0 ― 30 14 ― 30 3.5 ― 30 TD62084AP / CP / F / AF 8 ― 30 TD62082AP / CP / F / AF 0 ― 7.4 0 ― 0.5 0 ― 1.0 0 ― 5 ― ― 50 ― ― 100 ― ― 35 ― ― 400 ― ― 320 ― ― 0.52 ― ― 0.4 AP, AF Output Sustaining Voltage CP VCE (SUS) F AP, CP Output Current IOUT F, AF Input Voltage Except TD62081AP / CP / F / AF VIN TD62082AP / CP / F / AF Input Voltage (Output On) Input Voltage (Output Off) TD62083AP / CP / F / AF TD62083AP / CP / F / AF VIN (ON) VIN (OFF) TD62084AP / CP / F / AF Input Current Only TD62081AP / CP / F / AF IIN AP, AF Clamp Diode Reverse Voltage CP VR F Clamp Diode Forward Current Power Dissipation CP AP, CP F, AF IF PD 3 UNIT V mA / ch V V V mA V mA W 2001-06-28 TD62081~084AP/CP/F/AF ELECTRICAL CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CIR− CUIT AP, AF VCE = 50 V CP VCE = 100 V F VCE = 35 V AP, AF VCE = 50 V CP VCE = 100 V Output Leakage F Current AP, AF ICEX 1 TD62082 CP VCE (sat) 2 IIN (ON) 2 TD62084AP / CP / F / AF IIN (OFF) 4 TD62082AP / CP / F / AF TD62083AP / CP / F / AF VIN (ON) 5 TD62084AP / CP / F / AF hFE 2 Clamp Diode Reverse Current IR 6 Clamp Diode Forward Voltage VF 7 CIN ― Note: 50 Ta = 85°C ― ― 100 UNIT µA VIN = 1 V ― ― 500 IOUT = 350 mA, IIN = 500 µA ― 1.3 1.6 IOUT = 200 mA, IIN = 350 µA ― 1.1 1.3 IOUT = 100 mA, IIN = 250 µA ― 0.9 1.1 VIN = 17 V ― 0.82 1.25 VIN = 3.85 V ― 0.93 1.35 VIN = 5 V ― 0.35 0.5 VIN = 12 V ― 1.0 1.45 IOUT = 500 µA, Ta = 85°C 50 65 ― VCE = 2 V, IOUT = 300 mA ― ― 13 VCE = 2 V, IOUT = 200 mA ― ― 2.4 VCE = 2 V, IOUT = 250 mA ― ― 2.7 VCE = 2 V, IOUT = 300 mA ― ― 3.0 VCE = 2 V, IOUT = 125 mA ― ― 5.0 VCE = 2 V, IOUT = 200 mA ― ― 6.0 VCE = 2 V, IOUT = 275 mA ― ― 7.0 VCE = 2 V, IOUT = 350 mA ― ― 8.0 VCE = 2 V, IOUT = 350 mA 1000 ― ― VCE = 35 V TD62082AP / CP / F / AF Input Capacitance ― 500 VCE = 100 V F CP ― ― VCE = 50 V DC Current Transfer Ratio Ta = 25°C ― AP, AF Input Voltage (Output On) MAX VIN = 6 V VCE = 35 V TD62083AP / CP / F / AF TYP. VCE = 50 V F Collector−Emitter Saturation Voltage MIN VCE = 35 V VCE = 100 V TD62084 CP Input Current TEST CONDITION Ta = 25°C (Note) ― ― 50 Ta = 85°C (Note) ― ― 100 IF = 350 mA ― ― 2.0 IF = 280 mA ― ― 1.8 ― 15 ― V mA µA V µA V pF VR = VR MAX. 4 2001-06-28 TD62081~084AP/CP/F/AF CHARACTERISTIC SYMBOL TEST CIR− CUIT AP, AF Turn−On Delay CP tON F 8 AP, AF Turn−Off Delay CP tOFF F TEST CONDITION MIN TYP. MAX RL = 125 Ω, VOUT = 50 V ― 0.1 ― RL = 312 Ω, VOUT = 100 V ― 0.1 ― RL = 87.5 Ω, VOUT = 35 V ― 0.1 ― RL = 125 Ω, VOUT = 50 V ― 0.2 ― RL = 312 Ω, VOUT = 100 V ― 3.0 ― RL = 87.5 Ω, VOUT = 35 V ― 0.2 ― UNIT µA TEST CIRCUIT 1. ICEX 2. VCE (sat), hFE 3. IIN (ON) 4. IIN (OFF) 5. VIN (ON) 6. IR 7. VF 5 2001-06-28 TD62081~084AP/CP/F/AF 8. tON, tOFF Note 1: Pulse Width 50 µs, Duty Cycle 10% Output Impedance 50 Ω, tr ≤ 5 ns, tf ≤ 10 ns Note 2: See below. INPUT CONDITION TYPE NUMBER R1 VIH TD62081AP / CP / F / AF 2.7 kΩ 3V TD62082AP / CP / F / AF 0Ω 13 V TD62083AP / CP / F / AF 0Ω 3V TD62084AP / CP / F / AF 0Ω 8V Note 3: CL includes probe and jig capacitance PRECAUTIONS for USING This IC does not include built-in protection circuits for excess current or overvoltage. If this IC is subjected to excess current or overvoltage, it may be destroyed. Hence, the utmost care must be taken when systems which incorporate this IC are designed. Utmost care is necessary in the design of the output line, COMMON and GND line since IC may be destroyed due to short−circuit between outputs, air contamination fault, or fault by improper grounding. 6 2001-06-28 TD62081~084AP/CP/F/AF 7 2001-06-28 TD62081~084AP/CP/F/AF 8 2001-06-28 TD62081~084AP/CP/F/AF PACKAGE DIMENSIONS DIP18−P−300−2.54D Unit : mm Weight: 1.478 g (Typ.) 9 2001-06-28 TD62081~084AP/CP/F/AF PACKAGE DIMENSIONS SOP18−P−375−1.27 Unit : mm Weight: 0.41 g (Typ.) 10 2001-06-28 TD62081~084AP/CP/F/AF RESTRICTIONS ON PRODUCT USE 000707EBA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The products described in this document are subject to the foreign exchange and foreign trade laws. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 11 2001-06-28