S913T/S913TR/S913TRW Vishay Telefunken MOSMIC for TV–Tuner Prestage with 9 V Supply Voltage MOSMIC - MOS Monolithic Integrated Circuit Electrostatic sensitive device. Observe precautions for handling. Applications Low noise gain controlled input stages in UHF-and VHF- tuner with 9 V supply voltage. RFC C block AGC VDD D G2 RF out RF in G1 C block S C block 94 9296 Features D D D D D Improved cross modulation at gain reduction D High AGC-range D SMD package Integrated gate protection diodes Low noise figure High gain Biasing network on chip 2 1 1 13 579 94 9279 3 S913T Marking: 913 Plastic case (SOT 143) 1 = Source, 2 = Drain, 3 = Gate 2, 4 = Gate 1 1 3 S913TR Marking: 13R Plastic case (SOT 143R) 1 = Source, 2 = Drain, 3 = Gate 2, 4 = Gate 1 2 13 654 4 95 10831 94 9278 4 4 2 13 566 3 S913TRW Marking: W13 Plastic case (SOT 343R) 1 = Source, 2 = Drain, 3 = Gate 2, 4 = Gate 1 Document Number 85059 Rev. 3, 20-Jan-99 www.vishay.de • FaxBack +1-408-970-5600 1 (9) S913T/S913TR/S913TRW Vishay Telefunken Absolute Maximum Ratings Tamb = 25_C, unless otherwise specified Parameter Drain - source voltage Drain current Gate 1/Gate 2 - source peak current Gate 1/Gate 2 - source voltage Total power dissipation Channel temperature Storage temperature range Test Conditions Tamb ≤ 60 °C Symbol Value VDS 12 ID 30 ±IG1/G2SM 10 ±VG1/G2SM 6 Ptot 200 TCh 150 Tstg –55 to +150 Unit V mA mA V mW °C °C Symbol RthChA Unit K/W Maximum Thermal Resistance Tamb = 25_C, unless otherwise specified Parameter Test Conditions Channel ambient on glass fibre printed board (25 x 20 x 1.5) mm3 plated with 35mm Cu Value 450 Electrical DC Characteristics Tamb = 25_C, unless otherwise specified Parameter Gate 1 - source breakdown voltage Gate 2 - source breakdown voltage Gate 1 - source leakage current Gate 2 - source leakage current Drain current Self-biased operating current Gate 2 - source cut-off voltage Test Conditions ±IG1S = 10 mA, VG2S = VDS = 0 Symbol Min ±V(BR)G1SS 7 ±IG2S = 10 mA, VG1S = VDS = 0 ±V(BR)G2SS +VG1S = 5 V, VG2S = VDS = 0 –VG1S = 5 V, VG2S = VDS = 0 ±VG2S = 5 V, VG1S = VDS = 0 Typ 7 10 +IG1SS –IG1SS ±IG2SS VDS = 9 V, VG1S = 0, VG2S = 4 V VDS = 9 V, VG1S = nc, VG2S = 4 V IDSS IDSP VDS = 9 V, VG1S = nc, ID = 100 mA VG2S(OFF) Max Unit 10 V 50 100 20 50 7 10 1.0 500 14 V mA mA nA mA mA V Caution for Gate 1 switch-off mode: No external DC-voltage on Gate 1 in active mode! Switch-off at Gate 1 with VG1S < 0.7 V is feasible. Using open collector switching transistor (inside of PLL), insert 10 kW collector resistor. www.vishay.de • FaxBack +1-408-970-5600 2 (9) Document Number 85059 Rev. 3, 20-Jan-99 S913T/S913TR/S913TRW Vishay Telefunken Electrical AC Characteristics VDS = 9 V, VG2S= 4 V, f = 1 MHz , Tamb = 25_C, unless otherwise specified Parameter Forward transadmittance Gate 1 input capacitance Feedback capacitance Output capacitance Power g gain AGC range Noise figure g Test Conditions GS = 2 mS, GL = 0.5 mS, f = 200 MHz GS = 3,3 mS, GL = 1 mS, f = 800 MHz VDS = 9 V, VG2S = 1 to 4 V, f = 800 MHz GS = 2 mS, GL = 0.5 mS, f = 200 MHz GS = 3,3 mS, GL = 1 mS, f = 800 MHz Symbol Min y21s 20 Cissg1 Crss Coss Gps Gps 16.5 DGps 40 F F Typ 24 2.1 20 0.9 26 20 1 1.3 Max Unit 28 mS 2.5 pF fF pF dB dB dB dB dB Common Source S–Parameters VDS = 9 V , VG2S = 4 V , Z0 = 50 W, Tamb = 25_C, unless otherwise specified f/MHz 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200 1250 1300 S11 LOG ANG MAG dB deg –0.02 –4.1 –0.04 –7.9 –0.12 –11.9 –0.19 –15.7 –0.29 –19.7 –0.41 –23.1 –0.52 –26.8 –0.66 –30.3 –0.81 –33.6 –0.97 –36.9 –1.12 –40.3 –1.28 –43.3 –1.42 –46.5 –1.55 –49.6 –1.70 –52.4 –1.87 –55.4 –1.99 –58.4 –2.11 –61.3 –2.24 –64.2 –2.38 –67.1 –2.50 –69.9 –2.67 –72.8 –2.72 –75.7 –2.85 –78.5 –2.95 –81.4 –3.06 –84.4 Document Number 85059 Rev. 3, 20-Jan-99 S21 LOG ANG MAG dB deg 7.50 174.9 7.41 169.0 7.31 162.9 7.20 157.3 7.07 150.8 6.94 145.8 6.71 140.0 6.59 134.8 6.34 129.9 6.17 124.6 5.96 119.7 5.74 114.7 5.55 110.6 5.36 105.8 5.17 101.5 4.98 97.0 4.84 93.0 4.68 88.4 4.52 84.5 4.31 80.3 4.14 75.8 3.96 71.9 3.90 67.6 3.80 64.2 3.67 60.0 3.55 55.7 S12 LOG ANG MAG dB deg –63.74 88.2 –57.58 85.0 –54.15 82.1 –51.78 79.3 –50.15 76.8 –48.89 75.0 –47.92 72.9 –47.25 71.2 –46.77 69.8 –46.47 68.5 –46.32 67.8 –46.34 68.8 –46.24 70.0 –46.36 71.0 –46.67 72.9 –47.12 76.2 –47.41 81.6 –47.72 89.3 –47.55 98.3 –47.07 104.4 –46.96 110.4 –46.72 119.7 –45.93 128.4 –44.91 137.0 –43.76 144.2 –42.39 149.1 S22 LOG ANG MAG dB deg –0.13 –1.6 –0.14 –3.0 –0.16 –4.5 –0.18 –5.8 –0.20 –7.6 –0.24 –8.9 –0.27 –10.2 –0.31 –11.7 –0.35 –12.9 –0.40 –14.5 –0.44 –15.7 –0.49 –17.0 –0.54 –18.2 –0.57 –19.4 –0.62 –20.8 –0.66 –22.0 –0.71 –23.3 –0.74 –24.8 –0.79 –25.9 –0.86 –27.3 –0.95 –28.4 –0.98 –29.7 –1.01 –31.1 –1.03 –32.4 –1.06 –33.8 –1.15 –35.0 www.vishay.de • FaxBack +1-408-970-5600 3 (9) S913T/S913TR/S913TRW Vishay Telefunken 250 40 y21s – Forward Transadmittance ( mS ) Ptot – Total Power Dissipation ( mW ) Typical Characteristics (Tamb = 25_C unless otherwise specified) 200 150 100 50 VDS=9V f=200MHz 30 20 10 0 0 0 25 50 75 100 150 125 Tamb – Ambient Temperature ( °C ) 95 10771 0 Figure 1. Total Power Dissipation vs. Ambient Temperature 12 VG2S=5V 3V 2V 4 0 1 2 3 4 5 6 7 8 2 1 VDS=9V f=200MHz 0 0 9 VDS – Drain Source Voltage ( V ) 95 10772 2 3 4 5 6 Figure 5. Gate 1 Input Capacitance vs. Gate 2 Source Voltage 2 20 C oss – Output Capacitance ( pF ) VDS=9V ID – Drain Current ( mA ) 1 VG2S – Gate 2 Source Voltage ( V ) 95 10775 Figure 2. Drain Current vs. Drain Source Voltage 16 12 8 4 VG2S=4V f=200MHz 1.5 1 0.5 0 0 0 95 10773 4 3 1V 0 3 4 C issg1 – Gate 1 Input Capacitance ( pF ) ID – Drain Current ( mA ) 16 4V 2 Figure 4. Forward Transadmittance vs. Gate 2 Source Voltage 20 8 1 VG2S – Gate 2 Source Voltage ( V ) 95 10774 1 2 3 4 VG2S – Gate 2 Source Voltage ( V ) Figure 3. Drain Current vs. Gate 2 Source Voltage www.vishay.de • FaxBack +1-408-970-5600 4 (9) 3 95 11145 5 7 9 11 VDS – Drain Source Voltage ( V ) Figure 6. Output Capacitance vs. Drain Source Voltage Document Number 85059 Rev. 3, 20-Jan-99 S913T/S913TR/S913TRW Vishay Telefunken 80 CM – Cross Modulation ( dB ) S 21 2 – Transducer Gain ( dB ) 20 0 –20 –40 60 40 20 VDS=9V f=800MHz VDS=9V f=800MHz –60 0 0 95 10776 1 2 3 VG2S – Gate 2 Source Voltage ( V ) Figure 7. Transducer Gain vs. Gate 2 Source Voltage Document Number 85059 Rev. 3, 20-Jan-99 2 4 95 11146 3 4 5 6 VG2S – Gate 2 Source Voltage ( V ) Figure 8. Cross Modulation vs. Gate 2 Source Voltage www.vishay.de • FaxBack +1-408-970-5600 5 (9) S913T/S913TR/S913TRW Vishay Telefunken VDS = 9 V, VG2S = 4 V , Z0 = 50 W S12 S11 j 90° 120° j0.5 60° j2 30° j0.2 0 j5 ÁÁÁ ÁÁÁ ÁÁÁÁÁÁ ÁÁÁ ÁÁÁ ÁÁÁÁÁÁ 0.2 0.5 1 2 5 1050 50 1 550 1300MHz 50 180° 0.008 0.016 0° 300 –j0.2 –j5 550 1300MHz –150° 1050 800 –j0.5 –30° –j2 –120° –j 12 952 –60° –90° 12 953 Figure 9. Input reflection coefficient Figure 11. Reverse transmission coefficient S21 S22 j 90° 120° 550 60° j0.5 800 j2 1050 30° 300 j0.2 1300MHz j5 ÁÁÁÁ ÁÁÁÁÁÁ ÁÁÁÁ ÁÁÁÁÁÁ 50 1.0 2.0 0° 0 0.2 0.5 1 2 5 1 50 550 –j0.2 –150° –j5 –30° 1300MHz –j0.5 –120° 12 954 –j2 –60° –90° Figure 10. Forward transmission coefficient www.vishay.de • FaxBack +1-408-970-5600 6 (9) 12 955 –j Figure 12. Output reflection coefficient Document Number 85059 Rev. 3, 20-Jan-99 S913T/S913TR/S913TRW Vishay Telefunken Dimensions of S913T in mm 96 12240 Dimensions of S913TR in mm 96 12239 Document Number 85059 Rev. 3, 20-Jan-99 www.vishay.de • FaxBack +1-408-970-5600 7 (9) S913T/S913TR/S913TRW Vishay Telefunken Dimensions of S913TRW in mm 96 12238 www.vishay.de • FaxBack +1-408-970-5600 8 (9) Document Number 85059 Rev. 3, 20-Jan-99 S913T/S913TR/S913TRW Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 Document Number 85059 Rev. 3, 20-Jan-99 www.vishay.de • FaxBack +1-408-970-5600 9 (9)