GI850 THRU GI858 FAST SWITCHING PLASTIC RECTIFIER Reverse Voltage - 50 to 800 Volts Forward Current - 3.0 Amperes FEATURES DO-201AD ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High surge current capability ♦ Fast switching for high efficiency ♦ Construction utilizes void-free molded plastic technique ♦ High forward current operation ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs (2.3kg) tension 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) MECHANICAL DATA 0.052 (1.32) 0.048 (1.22) DIA. Case: JEDEC DO-201AD molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.04 ounce, 1.1 grams 1.0 (25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GI850 GI851 Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 Volts Maximum RMS voltage VRMS 35 70 140 280 420 510 Volts VDC 50 100 200 400 600 800 Volts VRSM 75 150 250 450 650 880 Volts Maximum DC blocking voltage Maximum non-repetitive peak reverse voltage GI852 GI854 GI856 GI858 UNITS Maximum average forward rectified current 0.375" (9.5mm) lead length at T A=90°C I(AV) 3.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 100.0 Amps VF 1.25 1.10 Volts Maximum instantaneous forward voltage at: 3.0A 9.4A, TJ=175°C Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=100°C IR 150 150 10.0 200 250 300 500 µA Typical junction capacitance (NOTE 1) CJ 28.0 pF Maximum reverse recovery time (NOTE 2) trr 200.0 ns IRM(REC) 2.0 Amps RΘJA RΘJL 22.0 8.0 °C/W TJ, TSTG -50 to +150 °C Maximum reverse recovery current (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Reverse recovery test conditions: IF=1.0A, VR=30V, di/dt=50A/µs, and Irr=10% IRM for measurement of trr (3) Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length, with both leads equally heat sink 4/98 FIG. 2 - MAXIMUM PEAK FORWARD SURGE CURRENT 8.0 TL=LEAD TEMPERATURE L= LEAD LENGTH L=0.25” (6.3 mm) 6.0 L=0.375” (9.5mm) LEAD LENGTH 4.0 2.0 0.8 x 0.8 x 0.40” (20 x 20 x 1mm) COPPER HEATSINKS RESISTIVE OR INDUCTIVE LOAD TA=AMBIENT TEMPERATURE 0.375” (9.5mm) LEAD LENGTH 0 30 50 70 90 110 130 150 PEAK FORWARD SURGE CURRENT, AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 200 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) NON-REPETITIVE TJ=25°C 100 TJ=150°C TJ=25°C TJ=150°C REPETITIVE 10 1 170 10 100 NUMBER OF CYCLES AT 60 HZ TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT MICROAMPERES 10 10 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 0.1 TJ=100°C 1 TJ=50°C 0.1 TJ=25°C 0.01 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 TJ=25°C f=1.0 MHz Vsig=50mVp-p JUNCTION CAPACITANCE, pF INSTANTANEOUS FORWARD CURRENT AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RATINGS AND CHARACTERISTIC CURVES GI850 THRU GI858 10 1 10 REVERSE VOLTAGE, VOLTS 100 100