2SC5174 TOSHIBA Transistor Silicon NPN Epitaxial Type 2SC5174 Power Amplifier Applications Driver Stage Amplifier Applications • High transition frequency: fT = 100 MHz (typ.) • Complementary to 2SA1932 Unit: mm Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 230 V Collector-emitter voltage VCEO 230 V Emitter-base voltage VEBO 5 V Collector current IC 1 A Base current IB 0.1 A Collector power dissipation PC 1.8 W Junction temperature Tj 150 °C JEDEC ― Tstg −55 to 150 °C JEITA ― Storage temperature range TOSHIBA Weight: 1.5 g (typ.) Electrical Characteristics (Ta = 25°C) Characteristics 2-10T1A Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 230 V, IE = 0 ― ― 1.0 µA Emitter cut-off current IEBO VEB = 5 V, IC = 0 ― ― 1.0 µA V (BR) CEO V Collector-emitter breakdown voltage DC current gain Collector-emitter saturation voltage Base-emitter voltage Transition frequency IC = 10 mA, IB = 0 230 ― ― hFE VCE = 5 V, IC = 100 mA 100 ― 320 VCE (sat) IC = 500 mA, IB = 50 mA ― ― 1.5 V VBE VCE = 5 V, IC = 500 mA ― ― 1.0 V VCE = 10 V, IC = 100 mA ― 100 ― MHz VCB = 10 V, IE = 0, f = 1 MHz ― 20 ― pF fT Collector output capacitance Cob Marking C5174 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 1 2004-07-26 2SC5174 IC – VCE IC – VBE 1.0 20 10 Common emitter VCE = 5 V 0.8 IC (A) 8 6 0.6 4 Collector current Collector current IC (A) 1.0 0.4 IB = 2 mA 0.2 0.8 Ta = 100°C 0.6 25 −25 0.4 0.2 Common emitter Ta = 25°C 0 0 2 4 6 8 Collector-emitter voltage VCE 0 0 10 0.4 0.2 Collector-emitter saturation voltage VCE (sat) (V) hFE 3 1000 DC current gain 500 300 Ta = 100°C 100 −25 50 25 30 10 0.003 0.01 0.03 0.1 VBE 1.2 1.4 (V) VCE (sat) – IC 5 Common emitter VCE = 5 V 3000 1.0 0.8 Base-emitter voltage (V) hFE – IC 5000 0.6 0.3 1 Common emitter IC/IB = 10 1 0.5 0.3 25 0.1 −25 0.05 0.03 0.01 0.003 3 Ta = 100°C Collector current IC (A) 0.01 0.03 0.1 0.3 1 3 Collector current IC (A) Safe Operating Area 3 IC max (pulsed)* fT – IC 1 IC (A) 300 Collector current Transition frequency fT (MHz) 500 100 50 30 5 5 VCE = 10 V Ta = 25°C 10 30 100 Collector current 300 1 ms* 10 ms* 0.5 100 ms* 0.3 DC operation Ta = 25°C 0.1 0.05 0.03 *: Single nonrepetitive pulse Ta = 25°C Curves must be derated 0.01 linearly with increase in temperature. 0.005 1 3 5 10 30 Common emitter 10 IC max (continuous) 1000 IC (mA) VCEO max 50 Collector-emitter voltage 2 100 VCE 300 500 (V) 2004-07-26 2SC5174 RESTRICTIONS ON PRODUCT USE 030619EAA • The information contained herein is subject to change without notice. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 3 2004-07-26