TLP541G, TLP542G TOSHIBA Photocoupler GaAs Ired & Photo-Thyristor TLP541G,TLP542G Programmable Controllers AC−Output Module Solid State Relay Unit in mm The TOSHIBA TLP541G consists of a photo−thyristor optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP package. The TOSHIBA TLP542G consists of a photo−thyristor optically coupled to a gallium arsenide infrared emitting diode in a seven lead plastic DIP package. • Peak off-state voltage: 400 V (min.) • Trigger LED current: 7 mA (max.) • On-state current: 150 mA (max.) • Isolation voltage: 2500 Vrms (min.) • UL recognized: UL1577, file no. E67349 Pin Configuration (top view) TOSHIBA 11−7A8 Weight: 0.4 g TOSHIBA 11−10C5 Weight: 0.53 g 1 2002-09-25 TLP541G, TLP542G Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit IF 70 mA ΔIF / °C −0.7 mA / °C Peak forward current (100 μs pulse, 100 pps) IFP 1 A Reverse voltage VR 5 V Junction temperature Tj 125 °C Peak forward voltage (RGK = 27kΩ) VDRM 400 V Peak reverse voltage (RGK = 27kΩ) VRRM 400 V On−state current IT (RMS) 150 mA On−state current derating (Ta ≥ 25°C) ΔIT / °C −2.0 mA / °C Peak one cycle surge current ITSM 2 A Peak reverse gate voltage VGM −5 V Tj 100 °C Storage temperature range Tstg −55~125 °C Operating temperature range Topr −30~100 °C Lead soldering temperature (10 s) Tsol 260 °C BVS 2500 Vrms Forward current Detector LED Forward current derating (Ta ≥ 25°C) Junction temperature Isolation voltage (AC, 1 min., R.H. ≤ 60%) (Note) (Note) Device considered a two terminal device: LED side pins shorted together and detector side pins shorted together. Recommended Operating Conditions Characteristic Symbol Min. Typ. Max. Unit Supply voltage VAC ― ― 120 Vac Forward current IF 10 16 25 mA Operating temperature Topr −30 ― 85 °C Gate to cathode resistance RGK ― 27 33 kΩ Gate to cathode capacity CGK ― 0.01 0.1 μF 2 2002-09-25 TLP541G, TLP542G Individual Electrical Characteristics (Ta = 25°C) Detector LED Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V ― ― 10 μA Capacitance CT V = 0, f = 1 MHz ― 30 ― pF Off−state current IDRM VAK = 400 V RGK = 27 kΩ Ta = 25°C ― 10 5000 nA Ta = 100°C ― 1 100 μA Reverse current IRRM VKA = 400 V RGK = 27 kΩ Ta = 25°C ― 10 5000 nA Ta = 100°C ― 1 100 μA On−state voltage VTM ITM = 100 mA ― 0.9 1.3 V Holding current IH RGK = 27 kΩ ― 0.2 1 mA Off−state dv/dt dv/dt VAK = 280 V, RGK = 27 kΩ 5 10 ― V/μs V = 0, f = 1 MHz Anode to gate ― 20 ― Gate to cathode ― 350 ― Min. Typ. Max. Unit Capacitance Cj pF Coupled Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Trigger LED current IFT VAK = 6 V, RGK = 27 kΩ 1 4 7 mA Turn−on time ton IF = 50 mA, RGK = 27 kΩ ― 10 ― μs Capacitance (input to output) CS VS = 0, f = 1 MHz ― 0.8 ― pF Isolation resistance RS VS = 500 V, R.H. ≤ 60% ― 10 ― Ω ― Vrms Isolation voltage BVS AC, 1 minute 3 2500 11 ― 2002-09-25 TLP541G, TLP542G 4 2002-09-25 TLP541G, TLP542G 5 2002-09-25 TLP541G, TLP542G RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2002-09-25