TLP741G TOSHIBA Photocoupler GaAs Ired & Photo−Thyristor TLP741G Office Machine Household Use Equipment Solid State Relay Switching Power Supply Unit in mm The TOSHIBA TLP741G consists of a photo-thyristor optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP package. • Peak off−state voltage: 400V(min.) • Trigger LED current: 10mA(max.) • On−state current: 150mA(max.) • UL recognized: UL1577, file no. E67349 • BSI approved: BS EN60065: 2002 Certificate no. 8877 BS EN60950-1: 2002 Certificate no. 8878 • Isolation voltage: 4000Vrms(min.) • Option (D4) type VDE approved: DIN EN 60747-5-2 Certificate no. 40009302 Maximum operating insulation voltage: 630VPK Highest permissible over voltage: 6000VPK TOSHIBA Weight: 0.35 g (Note) When a EN 60747-5-2 approved type is needed, please designate the "option (D4)" • Creepage distance: Clearance: Insulation thickness: 11−7B1 7.62mm pich standard type 10.16mm pich (LF2) type 7.0mm(min.) 7.0mm(min.) 0.5mm(min.) 8.0mm(min.) 8.0mm(min.) 0.5mm(min.) 1 Pin Configuration (top view) 2007-10-01 TLP741G Absolute Maximum Ratings (Ta = 25°C) Characteristic Forward current Forward current derating (Ta ≥ 39°C) LED Peak forward current (100μs pulse, 100pps) Power dissipation Symbol Rating Unit IF 60 mA ΔIF / °C −0.7 mA / °C IFP 1 A PD 100 mW ΔPD / °C −1.0 mW / °C Reverse voltage VR 5 V Junction temperature Tj 125 °C Peak forward voltage(RGK = 27kΩ) VDRM 400 V Peak reverse voltage(RGK = 27kΩ) VRRM 400 V On−state current IT(RMS) 150 mA On−state current derating (Ta ≥ 25°C) ΔIT / °C −2.0 mA / °C ITP 3 A Peak one cycle surge current ITSM 2 A Peak reverse gate voltage VGM 5 V PD 150 mW ΔPD / °C −2.0 mW / °C Tj 100 °C Storage temperature range Tstg −55~125 °C Operating temperature range Topr −55~100 °C Lead soldering temperature (10s) Tsol 260 °C Total package power dissipation PT 250 mW Total package power dissipation derating (Ta ≥ 25°C) ΔPT / °C −3.3 mW / °C Isolation voltage (AC, 1 min., R.H. ≤ 60%) BVS 4000 Vrms Detector Power dissipation derating (Ta ≥ 25°C) Peak on−state current (100μs pulse, 120pps) Power dissipation Power dissipation derating (Ta ≥ 25°C) Junction temperature Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Recommended Operating Conditions Characteristic Symbol Min. Typ. Max. Unit Supply voltage VAC ― ― 120 Vac Forward current IF 15 20 25 mA Operating temperature Topr −25 ― 85 °C Gate to cathode resistance RGK ― 27 33 kΩ Gate to cathode capacity CGK ― 0.01 0.1 μF Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2007-10-01 TLP741G Individual Electrical Characteristics (Ta = 25°C) Detector LED Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward voltage VF IF = 10mA 1.0 1.15 1.3 V Reverse current IR VR = 5V ― ― 10 μA Capacitance CT V = 0, f = 1MHz ― 30 ― pF Ta = 25°C ― 10 5000 nA Ta = 100°C ― 1 100 μA Ta = 25°C ― 10 5000 nA Ta = 100°C ― 1 100 μA ITM = 100mA ― 0.9 1.3 V RGK = 27kΩ ― 0.2 ― mA VD = 280V, RGK = 27kΩ 5 10 ― V/μs Anode to gate ― 20 ― Gate to cathode ― 350 ― Min. Typ. Max. Unit Off−state current IDRM VAK = 400V RGK = 27kΩ Reverse current IRRM VKA = 400V RGK = 27kΩ On−state voltage VTM Holding current IH Off−state dv / dt dv/dt Capacitance Cj V = 0, f = 1MHz pF Coupled Characteristics (Ta = 25°C) Characteristic Symbol Test Condition Trigger LED current IFT VAK = 6V, RGK = 27kΩ ― 4 10 mA Turn−on time tON IF = 30mA, VAA = 50V, RGK = 27kΩ ― 10 ― μs Coupled dv/dt dv/dt VS = 500V, RGK = 27kΩ 500 ― ― V/μs ― 0.8 ― pF ― Ω Capacitance (input to output) CS VS = 0, f = 1MHz Isolation resistance RS VS = 500V AC, 1 minute Isolation voltage BVS 1×10 12 10 14 4000 ― ― AC, 1 second, in oil ― 10000 ― DC, 1 minute, in oil ― 10000 ― 3 Vrms Vdc 2007-10-01 TLP741G 4 2007-10-01 TLP741G 5 2007-10-01 TLP741G RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-10-01