PR3001G - PR3007G 3.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER Features · · · · · · · Glass Passivated Die Construction Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 125A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 · · · A C D DO-201AD Mechanical Data · · B A Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 1.12 grams (approx.) Dim Min Max A 25.40 ¾ B 7.20 9.50 C 1.20 1.30 D 4.80 5.30 All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic PR PR PR PR PR PR PR Symbol 3001G 3002G 3003G 3004G 3005G 3006G 3007G Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 55°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 3.0 A IFSM 125 A @ IF = 3.0A VFM 1.3 V @ TA = 25°C @ TA = 125°C IRM 5.0 100 mA Reverse Recovery Time (Note 3) trr Typical Junction Capacitance (Note 2) Cj 50 pF RqJA 32 K/W Tj, TSTG -65 to +150 °C Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 150 250 500 ns 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1A, Irr = 0.25A. See figure 5. DS27003 Rev. D-2 1 of 2 PR3001G - PR3007G IF, INSTANTANEOUS FOWRARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 4 Single phase half wave Resistive or Inductive load 3 2 1 0 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Derating Curve 175 1.0 0.1 Tj = 25°C Pulse width = 300 µs 0.01 0.6 0.8 1.0 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 Cj, CAPACITANCE (pF) IFSM, PEAK FWD SURGE CURRENT (A) 200 10 100 Tj = 25°C f = 1 MHz 10 1 10 1 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Peak Forward Surge Current 100 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr 50Ω NI (Non-inductive) (-) 10Ω NI Device Under Test (+) +0.5A (-) 0A Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS27003 Rev. D-2 2 of 2 PR3001G - PR3007G