PR3001 - PR3005 3.0A FAST RECOVERY RECTIFIER Features · · · · · · Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 150 A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 B A · · · C D Mechanical Data · · A DO-201AD Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 1.12 grams (approx.) Dim Min Max A 25.40 ¾ B 7.20 9.50 C 1.20 1.30 D 4.80 5.30 All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 90°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage @ IF = 3.0A @ TA = 25°C @ TA = 100°C Symbol PR 3001 PR 3002 PR 3003 PR 3004 PR 3005 Unit VRRM VRWM VR 50 100 200 400 600 V VR(RMS) 35 70 140 280 420 V IO 3.0 A IFSM 150 A VFM 1.2 V IRM 5.0 100 mA Reverse Recovery Time (Note 3) trr Typical Junction Capacitance (Note 2) Cj Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 150 250 ns 50 pF RqJA 15 K/W Tj, TSTG -65 to +150 °C 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF =0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. DS26014 Rev. A1-2 1 of 2 PR3001 - PR3005 Single phase half wave Resistive or Inductive load 3 2 1 0 0 25 50 100 125 150 1.0 0.1 Tj = 25°C Pulse width = 300µs 0.01 0.6 175 0.8 1.0 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics AMBIENT TEMPERATURE (°C) Fig. 1 Forward Derating Curve 200 100 PR3001 - PR3004 100 Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) A, 75 10 IF, INSTANTANEOUS FOWRARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 4 Tj = 25°C f = 1.0MHz PR3005 10 1 10 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 100 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr 50Ω NI (Non-inductive) (-) 10Ω NI Device Under Test (+) +0.5A (-) 0A Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS26014 Rev. A1-2 2 of 2 PR3001 - PR3005