UF2001 - UF2007 2.0A Axial Leaded Ultrafast Diode Features · · · · · · Diffused Junction Ultra-Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 60A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 B A · · · · C D Mechanical Data · · A DO-15 Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 0.4 grams (approx.) Mounting Position: Any Dim Min Max A 25.40 ¾ B 5.50 7.62 C 0.686 0.889 D 2.60 3.60 All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 50°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage @ IF = 2.0A @ TA = 25°C @ TA = 100°C Symbol UF 2001 UF 2002 UF 2003 UF 2004 UF 2005 UF 2006 UF 2007 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 2.0 A IFSM 60 A VFM 1.0 1.3 IRM Reverse Recovery Time (Note 3) trr 50 Typical Junction Capacitance (Note 2) Cj 50 Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 1.7 5.0 100 V mA 75 30 ns pF RqJA 50 K/W Tj, TSTG -65 to +150 °C 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured at IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. 1 of 2 IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 2.0 1.6 1.2 0.8 0.4 Single phase half-wave 60 Hz resistive or inductive load 0 25 50 75 100 125 150 175 10 UF2005 - UF2007 1.0 0.1 Tj = 25°C Pulse width = 300µs 0.01 0.6 200 0.8 1.0 1.2 60 Cj, CAPACITANCE (pF) 100 40 20 10 100 Tj = 25°C f = 1.0MHz 10 1 0 1 1 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current trr 50Ω NI (Non-inductive) (+) (-) +0.5A 10Ω NI Device Under Test (-) 0A Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) UF2004 UF2001 - UF2003 -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit 2 of 2 100