DZT2907A NEW PRODUCT PNP SURFACE MOUNT TRANSISTOR Features • • • • • • 3 Epitaxial Planar Die Construction Complementary NPN Type Available (DZT2222A) Ideally Suited for Automated Assembly Processes Ideal for Medium Power Amplification and Switching Lead Free By Design/RoHS Compliant (Note 1) "Green" Device (Note 2) 2 1 4 SOT-223 Mechanical Data • • • • • • • COLLECTOR 3 E Case: SOT-223 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Matte Tin annealed over Copper Leadframe (Lead Free Plating). Solderable per MIL-STD-202, Method 208 Marking & Type Code Information: See Page 4 Ordering Information: See Page 4 Weight: 0.115 grams (approximate) Maximum Ratings C 4 2,4 2 C 1 BASE 1 B 3 EMITTER TOP VIEW Schematic and Pin Configuration @TA = 25°C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Continuous Current (Note 3) Peak Collector Current Symbol VCBO VCEO VEBO IC ICM Value -60 -60 -5 -600 -800 Unit V V V mA mA Value 1000 (Note 3) 1500 (Note 4) 12 -55 to +150 83.3 Unit Thermal Characteristics Characteristic Symbol Power Dissipation @ TA = 25°C Pd Power Derating Factor above 25°C (Note 4) Operating and Storage Temperature Range Pder Tj, TSTG Thermal Resistance, Junction to Ambient Air @ TA = 25°C (Note 4) Notes: 1. 2. 3. 4. RθJA mW mW/°C °C ο C/W No purposefully added lead. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. Device mounted on 2” x 2” FR-4 PC board, 2 oz. copper, single sided, pad layout as shown on page 4, or on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Device mounted on FR-4 PCB, 7cm2 of copper pad area. DS30921 Rev. 5 - 2 1 of 4 www.diodes.com DZT2907A © Diodes Incorporated Electrical Characteristics Symbol Min Max Unit ⎯ ⎯ ⎯ ⎯ -60 -60 -5 -0.01 -10 -50 -50 ⎯ ⎯ ⎯ μA nA nA V V V VCB = -50V, IE = 0 VCB = -50V, IE = 0, TA = 150°C VCE = -30V, VEB(OFF) = -0.5V VCE = -30V, VEB(OFF) = -0.5V IC = -10 μA, IE = 0 IC = -10 mA, IB = 0 IE = -10 μA, IC = 0 ⎯ ⎯ 75 100 100 100 50 ⎯ ⎯ -0.4 -1.6 ⎯ ⎯ ⎯ 300 ⎯ -1.3 -2.6 V V ⎯ ⎯ ⎯ ⎯ ⎯ V V IC = -150mA, IB = -15mA IC = -500mA, IB = -50mA VCE = -10V, IC = -100μA VCE = -10V, IC = -1mA VCE = -10V, IC = -10mA VCE = -10V, IC = -150mA VCE = -10V, IC = -500mA IC = -150mA, IB = -15mA IC = -500mA, IB = -50mA fT Cobo Cibo 200 ⎯ ⎯ ⎯ 8 30 MHz pF pF ton td tr toff ts tf ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ 45 10 40 100 80 30 ns ns ns ns ns ns Collector-Base Cutoff Current ICBO Collector Cutoff Current Base Cutoff Current Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage ON CHARACTERISTICS (Note 5) ICEX IBL V(BR)CBO V(BR)CEO V(BR)EBO Collector-Emitter Saturation Voltage VCE(SAT) DC Current Gain hFE Base-Emitter Saturation Voltage VBE(SAT) SMALL SIGNAL CHARACTERISTICS Current Gain-Bandwidth Product Output Capacitance Input Capacitance SWITCHING CHARACTERISTICS Turn-On Time Delay Time Rise Time Turn-Off Time Storage Time Fall Time Notes: Test Conditions VCE = -20V, IC = -50mA, f = 100MHz VCB = -10V, IE = 0A, f =1MHz VEB = -2V, IC = 0A, f =1MHz VCC = -30V, IC = -150mA, IB1 = -15mA VCC = -6V, IC = -150mA, IB1 = IB2 = -15mA 5. Pulse Test: Pulse width, tp<300 uS, Duty Cycle, d< =0.02 Typical Characteristics @TA = 25°C unless otherwise specified -IC, COLLECTOR CURRENT (A) 1.0 P D, POWER DISSIPATION (mW) NEW PRODUCT Characteristic OFF CHARACTERISTICS (Note 5) @TA = 25°C unless otherwise specified 0.8 0.6 0.4 0.2 0 0 150 25 75 100 125 50 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Power Dissipation vs. Ambient Temperature (Note 3) 0 DS30921 Rev. 5 - 2 -VCE, COLLECTOR EMITTER VOLTAGE (V) Fig. 2 Typical Collector Current as a Function of Collector Emitter Voltage 2 of 4 www.diodes.com DZT2907A © Diodes Incorporated -VCE(SAT), COLLECTOR-EMITTER SATURATION VOLTAGE (V) IC/IB = 10 -VBE(SAT), BASE-EMITTER SATURATION VOLTAGE (V) -VBE(ON), BASE-EMITTER TURN-ON VOLTAGE (V) 1.2 1.2 1 0.8 0.6 0.4 0.2 0 0.1 1 10 100 1 0.8 0.6 0.4 0.2 0 1000 0.1 -IC, COLLECTOR CURRENT (mA) Fig. 5 Typical Base-Emitter Turn-On Voltage vs. Collector Current 10 1 100 1000 -IC, COLLECTOR CURRENT (mA) Fig. 6 Typical Base-Emitter Saturation Voltage vs. Collector Current 500 fT, GAIN BANDWIDTH PRODUCT (MHz) 35 30 CAPACITANCE (pF) NEW PRODUCT hFE, DC CURRENT GAIN -IC, COLLECTOR CURRENT (mA) Fig. 4 Typical Collector-Emitter Saturation Voltage vs. Collector Current -IC, COLLECTOR CURRENT (A) Fig. 3 Typical DC Current Gain vs. Collector Current 25 20 15 10 5 450 400 350 300 250 200 150 100 50 0 0 0.1 1 10 0 100 VR, REVERSE VOLTAGE (V) Fig. 7 Typical Capacitance Characteristics DS30921 Rev. 5 - 2 20 40 60 100 80 -IC, COLLECTOR CURRENT (mA) Fig. 8 Typical Gain-Bandwidth Product vs. Collector Current 3 of 4 www.diodes.com DZT2907A © Diodes Incorporated Ordering Information (Note 6) Packaging SOT-223 NEW PRODUCT Device DZT2907A-13 Notes: Shipping 2500/Tape & Reel 6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information (Top View) YWW K2F = Manufacturer’s code marking K2F = Product type marking code YWW = Date code marking Y = Last digit of year ex: 7 = 2007 WW = Week code 01 - 52 Package Outline Dimensions SOT-223 Dim Min Max Typ A 1.55 1.65 1.60 A1 0.010 0.15 0.05 b1 2.90 3.10 3.00 b2 0.60 0.80 0.70 C 0.20 0.30 0.25 D 6.45 6.55 6.50 E 3.45 3.55 3.50 E1 6.90 7.10 7.00 e — — 4.60 e1 — — 2.30 L 0.85 1.05 0.95 Q 0.84 0.94 0.89 All Dimensions in mm Suggested Pad Layout: (Based on IPC-SM-782) (Unit:mm) IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30921 Rev. 5 - 2 4 of 4 www.diodes.com DZT2907A © Diodes Incorporated