DIODES DDTA114YLP-7

DDTA114YLP
Please click here to visit our online spice models database.
Features
•
•
•
•
•
•
Epitaxial Planar Die Construction
Ultra-Small Leadless Surface Mount Package
Ideally Suited for Automated Assembly Processes
Lead Free By Design/RoHS Compliant (Note 1)
"Green" Device (Note 2)
Qualified to AEC-Q101 Standards for High Reliability
1
•
•
•
•
•
•
C
Bottom View
Case: DFN1006-3
Case Material: Molded Plastic, "Green" Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020D
Terminal Connections: Collector Dot (See Diagram and
Marking Information)
Terminals: Finish — NiPdAu over Copper leadframe.
Solderable per MIL-STD-202, Method 208
Marking Information: See Page 3
Ordering Information: See Page 3
Weight: 0.0009 grams (approximate)
Maximum Ratings
R2
R1
1B
Mechanical Data
•
•
2E
3
2
3
Top View
DFN1006-3
OUT
10kΩ
IN
1
R1
R2
B
C 3
(or -supply)
IN
B
1
C OUT
3
(or -supply)
2
NEW PRODUCT
PRE-BIASED SMALL SIGNAL SURFACE MOUNT PNP TRANSISTOR
47kΩ
E
E
2
+ Supply
or GND
Schematic and Pin Configuration
GND (or +supply)
Equivalent Inverter Circuit
@TA = 25°C unless otherwise specified
Characteristic
Supply Voltage
Input Voltage
Output Current
Output (Collector) Current
Symbol
VCC
VIN
IO
Ic(max)
Value
-50
+6 to -40
-70
-100
Unit
V
V
mA
mA
Symbol
PD
Pder
Value
250
2
Unit
mW
mW/°C
RθJA
500
°C/W
Tj, TSTG
-55 to +150
°C
Thermal Characteristics
Characteristic
Power Dissipation (Note 3) @TA = 25°C
Power Derating above 25°C
Thermal Resistance, Junction to Ambient Air (Note 3) @TA = 25°C
(Equivalent to one heated junction of PNP)
Operating and Storage Temperature Range
Electrical Characteristics: Discrete PNP Transistor (Q1) @TA = 25°C unless otherwise specified
Characteristic
Off Characteristics (Note 4)
Collector-Base Breakdown Voltage
Collector-Emitter Breakdown Voltage
Collector-Base Cut Off Current
Collector-Emitter Cut Off Current, IO(OFF)
Emitter-Base Cut Off Current
Input Off Voltage
On Characteristics (Note 4)
Input-On Voltage
Input Current
DC Current Gain
Collector-Emitter Saturation Voltage
Output On Voltage
Input Resistance
Resistance Ratio
Small Signal Characteristics
Current Gain-Bandwidth Product
Notes:
Symbol
Min
Typ
Max
Unit
Test Condition
V(BR)CBO
V(BR)CEO
ICBO
ICEO
IEBO
VI(OFF)
-50
-50
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
-0.1
-0.5
-0.2
-0.3
V
V
μA
μA
mA
V
IC = -10μA, IE = 0
IC = -1.0mA, IB = 0
VCB = -50V, IE = 0
VCB = -50V, IB = 0
VEB = 4V, IC = 0
VCC = -5V, IO = -100uA
VI(ON)
II
hFE
VCE(SAT)
VO(ON)
R1
(R2/R1)
-1.4
⎯
80
⎯
⎯
7
3.7
⎯
⎯
⎯
⎯
-0.1
10
4.7
⎯
-0.88
⎯
-0.25
-0.3
13
5.7
V
mA
⎯
V
V
KΩ
⎯
VO = -0.3V, IO = IC = 1mA
VI = -5V
VCE = -5V, IC = -5mA
IC = -50mA, IB = -2.5mA
II = -0.25mA, IO = -5mA
⎯
⎯
fT
⎯
250
⎯
MHz
VCE = -10V, IE = -5mA, f = 100 MHz
1. No purposefully added lead.
2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.
3. Device mounted on FR-4 PCB, 1” x 0.85” x 0.062”; pad layout as shown on page 3 or Diodes Inc. suggested pad layout document AP02001, which can
be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect. Pulse width tp<300μS, Duty Cycle, d≤2%.
DS30807 Rev. 5 - 2
1 of 3
www.diodes.com
DDTA114YLP
© Diodes Incorporated
-IC, COLLECTOR CURRENT (A)
hFE, DC CURRENT GAIN
-VCE(SAT), COLLECTOR-EMITTER
SATURATION VOLTAGE (V)
-VCE, COLLECTOR-EMITTER VOLTAGE (V)
Fig. 2 Typical Collector Current vs. Collector-Emitter Voltage
-IC, COLLECTOR CURRENT (mA)
Fig. 4 Typical Collector-Emitter Saturation Voltage vs.
Collector Current
-IO, OUTPUT CURRENT (mA)
-IC, COLLECTOR CURRENT (mA)
Fig. 3 Typical DC Current Gain vs.
Collector Current
-VI, INPUT VOLTAGE (V)
NEW PRODUCT
PD, POWER DISSIPATION (mW)
TA, AMBIENT TEMPERATURE (°C)
Fig. 1 Power Dissipation vs. Ambient Temperature (Note 3)
-IC, OUTPUT CURRENT (mA)
Fig. 5 Typical Input Voltage vs. Output Current
(On Characteristics)
DS30807 Rev. 5 - 2
-VI, INPUT VOLTAGE (V)
Fig. 6 Typical Output Current vs. Input Voltage
(Off Characteristics)
2 of 3
www.diodes.com
DDTA114YLP
© Diodes Incorporated
NEW PRODUCT
Ordering Information (Note 5)
Packaging
DFN1006-3
Device
DDTA114YLP-7
Notes:
Shipping
3000/Tape & Reel
5. For packaging details, please go to our website at http://www.diodes.com/ap02007.pdf.
Marking Information
P3 = Product Type Marking Code
Dot Denotes Collector, Pin 3
P3
Mechanical Details
DFN1006-3
G
H
A
K
B C
M
D
N
L
Dim
Min
Max
Typ
A
0.95
1.05
1.00
B
0.55
0.65
0.60
C
0.45
0.55
0.50
D
0.20
0.30
0.25
G
0.47
0.53
0.50
H
0
0.05
0.03
K
0.10
0.20
0.15
L
0.20
0.30
0.25
M
—
—
0.35
N
—
—
0.40
All Dimensions in mm
Suggested Pad Layout
C
X1
X
G2
Dimensions
Value
Z
1.1
G1
0.3
G2
0.2
X
0.7
X1
0.25
Y
0.4
C
0.7
G1
Y
Z
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product
described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall
assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website,
harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written
approval of the President of Diodes Incorporated.
DS30807 Rev. 5 - 2
3 of 3
www.diodes.com
DDTA114YLP
© Diodes Incorporated