BC847BLD Lead-free Green NEW PRODUCT SMALL SIGNAL NPN TRANSISTOR WITH CONTROLLED BASE-EMITTER VOLTAGE Features · · · · · Low Deviation in Base-Emitter Voltage Surface Mount Package Ideally Suited for Automated Assembly Processes Lead Free by Design/RoHS Compliant (Note 2) "Green" Device (Note 2) Mechanical Data · · Case: SOT-23 · · · Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Matte Tin annealed over Alloy 42 leadframe. Solderable per MIL-STD-202, Method 208 · · · C Marking Type Code Information: See Page 4 3 Case material: Molded Plastic. "Green Molding" Compound. UL Flammability Classification Rating 94V-0 Fig. 1 SOT-23 Terminals Connections: See Diagram Ordering Information: See Page 4 Weight: 0.008 grams (approximate) 1 2 B E Fig. 2 : Schematic and Pin Configuration Maximum Ratings @ TA = 25°C unless otherwise specified Symbol Value Unit Collector-Base Voltage Characteristic VCBO 50 V Collector-Emitter Voltage VCEO 45 V Emitter-Base Voltage VEBO 6 V IC 200 mA Peak Collector Current ICM 200 mA Peak Emitter Current IEM 200 mA Power Dissipation (Note 3) Pd 300 mW Pder 2.4 mW/°C Unit Output Current - Continuous (Note 3) Power Deration Thermal Characteristics Symbol Value Operating and Storage Junction Temperature Range Characteristic Tj, TSTG -55 to +150 °C Thermal Resistance, Junction to Ambient Air (Note 3) RqJA 417 °C/W Notes: 1. No purposefully added Lead 2. Diodes Inc.'s "Green" policy can be found on our website at http:/www.diodes.com/products/lead_free/index.php. 3. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on page 4 or on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. DS30824 Rev. 3 - 2 1 of 5 www.diodes.com BC847BLD ã Diodes Incorporated NPN Transistor @ TA = 25°C unless otherwise specified Characteristic Symbol Min Typ Max Unit Test Condition Collector-Base Breakdown Voltage V(BR)CBO 50 — — V Collector-Emitter Breakdown Voltage V(BR)CEO 45 — — V IC = 1.0mA, IB = 0 Emitter-Base Breakdown Voltage V(BR)EBO 6 — — V IE = 10mA, IC = 0 ICEX — — 15 nA VCE = 50V, VEB(OFF) = 3.0V IBL — — 15 nA VCE = 40V, VEB(OFF) = 3.0V — — 15 nA VCB = 40V, IE = 0 OFF CHARACTERISTICS (Note 4) Collector Cutoff Current Base Cutoff Current (IBEX) IC = 10mA, IE = 0 Collector-Base Cut Off Current ICBO 5 mA VCB = 30V, TA = 150oC Collector-Emitter Cut Off Current, IO(OFF) ICEO — — 50 nA VCE = 40V, IB = 0 Emitter-Base Cut Off Current IEBO — — 50 nA VEB = 5V, IC = 0 180 — — — VCE = 5V, IC = 100mA 150 — — — VCE = 5V, IC = 500mA 220 — — — VCE = 5V, IC = 1mA 220 — — — VCE = 5V, IC = 2mA 150 — — — VCE = 5V, IC = 5mA ON CHARACTERISTICS (Note 4) hfe DC Current Gain 150 — — — VCE = 5V, IC = 10mA — 0.09 0.18 V IC = 10mA, IB = 0.5mA — 0.2 0.4 V IC = 100mA, IB = 5mA 647 657 667 mV — — 0.8 V IC = 10mA, IB = 0.5mA — — 0.9 V IC = 100mA, IB = 5mA COBO — 3 — pF VCB = 5.0V, f = 1.0 MHz, IE = 0 Input Impedance hie — 4.5 — KW Voltage Feedback Ratio hre — 2 — x 10E-4 Small Signal Current Gain hfe — 200 — — Output Admittance hoe — 30 — mS — MHz VCE = 20V, IC = 10 mA, f = 100 MHz 10 dB VCE = 5V, IC = 100µA, RS = 1KW, f = 1kHz Collector-Emitter Saturation Voltage VCE(SAT) Base-Emitter Turn-On Voltage VBE(ON) VBE(SAT) Base-Emitter Saturation Voltage VCE = 5V, IC = 2mA SMALL SIGNAL CHARACTERISTICS Output Capacitance Current Gain-Bandwidth Product fT 100 — Noise Figure NF — — Notes: VCE = 5.0V, IC = 2mA, f = 1.0KHz 4. Short duration pulse test used to minimize self-heating effect. Typical Characteristics 350 PD, POWER DISSIPATION (mW) NEW PRODUCT Electrical Characteristics: 300 250 200 150 100 o RqJA = 417 C/W 50 0 0 DS30824 Rev. 3 - 2 150 50 100 125 75 25 TA, AMBIENT TEMPERATURE (°C) Fig. 3 Max Power Dissipation vs Ambient Temperature 2 of 5 www.diodes.com 175 BC847BLD 0.2 TA = 150°C 400 hFE, DC CURRENT GAIN 350 TA = 125°C 300 250 TA = 85°C 200 TA = 25°C 150 100 TA = -55°C 0.16 Ib = 3mA 0.14 0.08 0.06 0.04 Ib 1.5mA Ib = 1mA Ib = 0.5mA Ib = 2mA 0 1000 100 Ib = 4.5mA Ib = 2.5mA 0.02 10 Ib = 4mA 0.1 0 1 Ib = 3.5mA 0.12 50 1 IC, COLLECTOR CURRENT (mA) Fig. 4 hFE vs IC 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 VCE, COLLECTOR EMITTER VOLTAGE (V) Fig. 5 IC vs VCE 1.4 0.6 Ic/Ib=10 0.5 0.4 0.3 TA = 150°C TA = 125°C 0.2 TA = 85°C 0.1 TA = 25°C VBE, BASE EMITTER VOLTAGE (V) VCE(SAT), COLLECTOR VOLTAGE (V) Ib = 5mA 0.18 VCE=5V IC, COLLECTOR CURRENT (A) NEW PRODUCT 450 0.1 1 10 100 TA = 25°C 1 TA = -55°C 0.8 0.6 TA = 150°C 0.4 TA = 85°C 0.2 TA = -55°C 0 VCE=1V 1.2 1000 IC, COLLECTOR CURRENT (mA) Fig. 6 VCE(SAT) vs IC TA = 125°C 0 0.1 1 10 100 1000 IC, COLLECTOR CURRENT (mA) Fig. 7 VBE vs IC VBE, BASE EMITTER VOLTAGE (V) 1.4 Ic/Ib=10 1.2 TA = 25°C 1 0.8 TA = -55°C 0.6 TA = 150°C 0.4 TA = 125°C 0.2 TA = 85°C 0 0.1 1 10 100 1000 IC, COLLECTOR CURRENT (mA) Fig. 8 VBE(SAT) vs IC DS30824 Rev. 3 - 2 3 of 5 www.diodes.com BC847BLD Notes: (Note 4) Device Packaging Shipping BC847BLD-7 SOT-23 3000/Tape & Reel 4. For Packaging Details, please see below or go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YM NEW PRODUCT Ordering Information KLD KLD = Product Type Marking Code YM = Date Code Marking Y = Year ex: T = 2006 M = Month ex: 9 = September Fig. 9 Date Code Key Year 2006 2007 2008 2009 2010 2011 2012 Code T U V W X Y Z Month Jan Feb March Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D Mechanical Details SOT-23 A B C TOP VIEW D E G H K J M L Fig. 10 Dim Min Max A 0.37 0.51 B 1.20 1.40 C 2.30 2.50 D 0.89 1.03 E 0.45 0.60 G 1.78 2.05 H 2.80 3.00 J 0.013 0.10 K 0.903 1.10 L 0.45 0.61 M 0.085 0.180 a 0° 8° All Dimensions in mm Suggested Pad Layout: (Based on IPC-SM-782) Y Z C G X E SOT-23 Z 3.4 G 0.7 X 0.9 Y 1.4 C 2.0 E 0.9 All Dimensions in mm Fig. 11 DS30824 Rev. 3 - 2 Figure 11 Dimensions 4 of 5 www.diodes.com BC847BLD NEW PRODUCT IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30824 Rev. 3 - 2 5 of 5 www.diodes.com BC847BLD