DDTC113TLP PRE-BIASED SMALL SIGNAL SURFACE MOUNT NPN TRANSISTOR Please click here to visit our online spice models database. NEW PRODUCT Features • • • • • • Epitaxial Planar Die Construction Ultra-Small Leadless Surface Mount Package Ideally Suited for Automated Assembly Processes Lead Free By Design/RoHS Compliant (Note 1) "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability 1 • • • • • • 2E 3 C 1B Mechanical Data • • 2 3 Bottom View Case: DFN1006-3 Case Material: Molded Plastic. "Green Molding" Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminal Connections: Collector Dot (See Diagram and Marking Information) Terminals: Finish - NiPdAu over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Code N4, Dot denotes Collector Side Ordering Information: See Page 3 Weight: 0.0009 grams (approx.) Maximum Ratings Top View DFN1006-3 1 B C 3 IN 1 10 KÙ C B 1 3 E E 2 OUT GND 2 Equivalent Inverter Circuit Schematic and Pin Configuration @TA = 25°C unless otherwise specified Characteristic Supply Voltage Input Voltage Output Current (IO) Symbol VCC VIN IC(max) Value 50 -5 to +10 100 Unit V V mA Symbol PD Pder Value 250 2 Unit mW mW/°C RθJA 500 °C/W Tj, TSTG -55 to +150 °C Thermal Characteristics Characteristic Power Dissipation (Note 3) @TA = 25 Power Derating above 25°C Thermal Resistance, Junction to Ambient Air (Note 3) @TA = 25 (Equivalent to one heated junction of NPN) Operating and Storage Temperature Range Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic OFF CHARACTERISTICS (Note 4) Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Base Cutoff Current Emitter-Base Cutoff Current ON CHARACTERISTICS (Note 4) DC Current Gain Collector-Emitter Saturation Voltage Input Resistance SMALL SIGNAL CHARACTERISTICS Current Gain-Bandwidth Product Symbol Min Typ Max Unit V(BR)CBO V(BR)CEO V(BR)EBO ICBO IEBO 50 50 5 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ 0.5 0.5 V V V μA μA IC = 10μA, IE = 0 IC = 1.0mA, IB = 0 IE = 50μA, IC = 0 VCB = 50V, IE = 0 VEB = 4V, IC = 0 hFE VCE(SAT) R1 100 ⎯ 0.7 380 ⎯ 1 600 0.25 1.3 ⎯ V KΩ VCE = 5V, IC = 1mA IC = 50mA, IB = 2.5mA ⎯ fT ⎯ 250 ⎯ MHz Notes: Test Condition VCE = 10V, IE = 5mA, f = 100MHz 1. No purposefully added lead. 2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 3. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on page 3 or Diodes Inc. suggested pad layout document AP02001 on our website at http://www.diodes.com/datasheets/ap02001.pdf. 4. Short duration pulse test used to minimize self-heating effect. DS30843 Rev. 7 - 2 1 of 3 www.diodes.com DDTC113TLP © Diodes Incorporated IC, COLLECTOR CURRENT (A) PD , POWER DISSIPATION (mW) NEW PRODUCT 0.12 0.10 0.08 0.06 0.04 0.02 RθJA = 500 °C/W 0.0 0 1 2 3 5 6 4 VCE, COLLECTOR-EMITTER VOLTAGE (V) Fig. 2 Typical Collector Current vs. Collector-Emitter Voltage TA, AMBIENT TEMPERATURE (°C) Fig. 1 Power Dissipation vs. Ambient Temperature (Note 3) 0.25 800 700 0.2 600 0.15 500 400 0.1 0.05 0 7 10 6 5 1 4 3 0.1 2 1 0 DS30843 Rev. 7 - 2 0.01 2 of 3 www.diodes.com 0 0.2 0.4 0.6 0.8 1 1.2 1.4 DDTC113TLP © Diodes Incorporated Ordering Information (Note 5) Packaging DFN1006-3 NEW PRODUCT Device DDTC113TLP-7 Notes: 5. Shipping 3000/Tape & Reel For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information N4 = Product Type Marking Code Dot Denotes Collector, Pin 3 N4 Mechanical Details DFN1006-3 Dim Min Max Typ A 0.95 1.075 1.00 B 0.55 0.675 0.60 C 0.45 0.55 0.50 D 0.20 0.30 0.25 G 0.47 0.53 0.50 H 0 0.05 0.03 K 0.10 0.20 0.15 L 0.20 0.30 0.25 M 0.35 ⎯ ⎯ N 0.40 ⎯ ⎯ All Dimensions in mm G H A K B C M D N L Suggested Pad Layout C Dimensions Z G1 G2 X X1 Y C X1 X G2 Value (in mm) 1.1 0.3 0.2 0.7 0.25 0.4 0.7 G1 Y Z IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30843 Rev. 7 - 2 3 of 3 www.diodes.com DDTC113TLP © Diodes Incorporated