PLL701-26 Low EMI Spread Spectrum Multiplier Clock FEATURES • • • • Spread Spectrum clock with frequency range of 33 ~ 90MHz. Output frequency 1X the input frequency. Less than 250 ps skew between outputs. Less than 100 ps cycle - cycle jitter. ±1.0% Center Spread Modulation (+/-15% tolerance). TTL/CMOS compatible outputs. 3.3V operation. Available in 8-Pin 150mil SOIC. FIN 1 CLK2 2 CLK1 3 GND 4 PLL701-26 • • • • PIN CONFIGURATION 8 CLK5 7 CLK4 6 VDD 5 CLK3 FIN = 33 ~ 90 Mhz DESCRIPTION The PLL701-26 is a Spread Spectrum Clock Generator designed for the purpose of reducing EMI in high-speed digital systems. The device is designed to operate from 33 ~ 90MHz and provides five lowskew outputs with ±1.0% Center Spread Modulation. BLOCK DIAGRAM CLK1 CLK2 FIN PLL SST 1X CLK3 CLK4 CLK5 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 08/12/04 Page 1 PLL701-26 Low EMI Spread Spectrum Multiplier Clock PIN DESCRIPTIONS Name Number Type FIN CLK2 CLK1 GND CLK3 VDD CLK4 CLK5 1 2 3 4 5 6 7 8 I O O I O P O O Description Input Clock Frequency. ( 33 ~ 90MHz ) Buffered Clock Output. 1X the input frequency Buffered Clock Output. 1X the input frequency Ground. Buffered Clock Output. 1X the input frequency 3.3V Power Supply. Buffered Clock Output. 1X the input frequency Buffered Clock Output. 1X the input frequency ( FIN ). ( FIN ). ( FIN ). ( FIN ). ( FIN ). ELECTRICAL SPECIFICATIONS 1. Absolute Maximum Ratings PARAMETERS SYMBOL Supply Voltage Input Voltage, dc Output Voltage, dc Storage Temperature Ambient Operating Temperature* Junction Temperature Lead Temperature (soldering, 10s) ESD Protection, Human Body Model MIN. V DD VI VO TS TA TJ -0.5 -0.5 -65 -40 MAX. UNITS 4.6 V DD +0.5 V DD +0.5 150 85 125 260 2 V V V °C °C °C °C kV Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the device and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other conditions above the operational limits noted in this specification is not implied. * Note: Operating Temperature is guaranteed by design for all parts (COMMERCIAL and INDUSTRIAL), but tested for COMMERCIAL grade only. 2. Electrical Characteristics PARAMETERS SYMBOL Supply Voltage Input Low Voltage Input High Voltage Input Low Current Input High Current Output Low Voltage Output High Voltage V DD V IL V IH I IL I IH V OL V OH Supply Current I DD CONDITIONS MIN. TYP. MAX. UNITS 3.63 0.8 V V V 19 0.10 0.25 2.9 50.0 100.0 0.4 µA µA V V 30.0 40.0 mA 2.97 2.0 V IN = 0V V IN = V DD I OL = 50 mA I OH = 50 mA Unloaded outputs at 75MHz, SEL inputs at V DD or GND 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 2.4 www.phaselink.com Rev 08/12/04 Page 2 PLL701-26 Low EMI Spread Spectrum Multiplier Clock 3. Timing Characteristics PARAMETERS SYMBOL Input Frequency Rise Time Fall Time Output Duty Cycle Input to Output Delay Cycle to Cycle Jitter F IN Tr Tf DT T cyc-cyc CONDITIONS Measured at 0.8V ~ 2.0V @ 3.3V Measured at 2.0V ~ 0.8V @ 3.3V MIN. 33 0.8 0.78 45 2 TYP. 0.95 0.85 50 Over output frequency range @ 3.3V 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com MAX. UNITS 90 1.1 0.9 55 4 100 MHz ns ns % ns ps Rev 08/12/04 Page 3 PLL701-26 Low EMI Spread Spectrum Multiplier Clock PACKAGE INFORMATION 8 PIN Narrow SOIC ( mm ) SOIC Symbol Min. Max. A A1 B C D E H L e 1.47 0.10 0.33 0.19 4.80 3.80 5.80 0.38 1.73 0.25 0.51 0.25 E H D 4.95 4.00 6.20 1.27 A A1 1.27 BSC C L e B ORDERING INFORMATION For part ordering, please contact our Sales Department: 47745 Fremont Blvd., Fremont, CA 94538, USA Tel: (510) 492-0990 Fax: (510) 492-0991 PART NUMBER The order number for this device is a combination of the following: Device number, Package type and Operating temperature range PLL701-26 S X X X PART NUMBER NONE= TUBE R=TAPE and REEL NONE=NORMAL PACKAGE L=GREEN PACKAGE PACKAGE TYPE S=SOIC Order Number PLL701-26SC-R PLL701-26SC PLL701-26SCL-R PLL701-26SCL Marking P701-26SC P701-26SC P701-26SCL P701-26SCL TEMPERATUE C=COMMERCIAL I = INDUSTRIAL Package Option SOIC -Tape and Reel SOIC –Tube SOIC -Tape and Reel SOIC –Tube PhaseLink Corporation, reserves the right to make changes in its products or specifications, or both at any time without notice. The information furnished by Phaselink is believed to be accurate and reliable. However, PhaseLink makes no guarantee or warranty concerning the accuracy of said information and shall not be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon this product. LIFE SUPPORT POLICY: PhaseLink’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the President of PhaseLink Corporation. 47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 11/18/04 Page 4