SPICE MODEL: PDU420 PDU420 4A ULTRA-FAST RECOVERY RECTIFIER PowerDI ä5 NEW PRODUCT Features Mechanical Data · · · · Glass Passivated Die Construction · · · · High Forward Surge Current Capability Ultra-Fast Recovery Time for High Efficiency High Maximum Junction Temperature For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb) Qualified to AEC-Q101 Standards for High Reliability · · Case: PowerDIä5 · · Moisture sensitivity: Level 1 per J-STD-020C · · · Polarity: See Diagram on Page 4 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking: See Page 3 Weight: 0.096 grams (approx.) BOTTOM VIEW TOP VIEW Maximum Ratings e3 @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See also figure 4) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Symbol Value Unit VRRM VRWM VR 200 V VR(RMS) 141 V IO 4 A IFSM 125 A Thermal Characteristics Characteristic Symbol Typ Max Unit RqJS ¾ 3.0 °C/W Thermal Resistance Junction to Soldering Point Thermal Resistance Junction to Ambient Air (Note 2) TA = 25°C RqJA 85 ¾ °C/W Thermal Resistance Junction to Ambient Air (Note 3) TA = 25°C RqJA 60 ¾ °C/W Thermal Resistance Junction to Ambient Air (Note 4) TA = 25°C RqJA 40 ¾ °C/W Operating Temperature Range Storage Temperature Range Notes: 1. 2. 3. 4. Tj -65 to +175 °C TSTG -65 to +175 °C RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm. DS30549 Rev. 6 - 2 PowerDI is a trademark of Diodes Incorporated. 1 of 4 www.diodes.com PDU420 ã Diodes Incorporated @ TA = 25°C unless otherwise specified Symbol Value Unit V(BR)R 200 V IR = 5mA Maximum Forward Voltage VFM 0.875 0.71 0.89 0.85 0.72 1.25 V IF = 3A, TS = 25°C IF = 3A, TS = 150°C IF = 4A, TS = 25°C IF = 4A, TS = 100°C IF = 4A, TS = 150°C IF = 12A, TS = 25°C Maximum Reverse Leakage Current (Note 5) IRM 5 150 mA TS = 25°C, VR = 200V TS = 150°C, VR = 200V trr 25 ns IF = 0.5A, IR = 1.0A IRR = 0.25A (See figure 7) Characteristic Minimum Reverse Breakdown Voltage (Note 5) Maximum Reverse Recovery Time IF, INSTANTANEOUS FORWARD CURRENT (A) Notes: Test Condition 5. Short duration test pulse used to minimize self-heating effect. 100 100 Tj = 175°C 10 Tj = 150°C 10 Tj = 175°C Tj = 125°C 1 Tj = 150°C 1 100m Tj = 85°C Tj = 125°C 10m 0.1 Tj = 25°C Tj = 85°C 1m 0.01 Tj = 25°C Tj = -65°C Tj = -65°C 0 0.2 0.4 0.6 0.001 1 0.8 1.2 100 50 0 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics 150 200 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics 300 5 f = 1MHz 250 IF, DC FORWARD CURRENT (A) CT, TOTAL CAPACITANCE (pF) NEW PRODUCT Electrical Characteristics 200 150 100 50 0 4 Note 3 3 Note 2 2 1 0 0 5 10 15 20 25 30 PowerDI is a trademark of Diodes Incorporated. 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Fig. 4 DC Forward Current Derating VR, REVERSE VOLTAGE (V) Fig. 3 Typical Total Capacitance DS30549 Rev. 6 - 2 0 2 of 4 www.diodes.com PDU420 250 IPK = 1 (DC) IAV Note 2 VR, DC REVERSE VOLTAGE (V) PF, FORWARD POWER DISSIPATION (W) NEW PRODUCT 6 4.5 3 1.5 200 150 100 50 0 0 0 1 3 2 4 5 6 7 8 9 50 0 10 150 100 200 TA, DERATED AMBIENT TEMPERATURE (°C) Fig. 6 Operating Temperature Derating IF, FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 7 Reverse Recovery Time Characteristic and Test Circuit Ordering Information Notes: (Note 6) Device Packaging Shipping PDU420-13 PowerDIä5 5000/Tape & Reel 6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information U420 YYWWK U420 = Product type marking code = Manufacturers’ code marking YYWW = Date code marking YY = Last digit of year ex: 06 for 2006 WW = Week code 01 to 52 K = Factory Designator DS30549 Rev. 6 - 2 PowerDI is a trademark of Diodes Incorporated. 3 of 4 www.diodes.com PDU420 NEW PRODUCT Package Outline Dimensions A D A2 b2 PowerDIä5 L1 E E1 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 L1 e A2 b1 b1 D D2 b2 D2 E L E2 e E E1 W L1 E2 e b1 LEFT PIN RIGHT PIN b1 BOTTOMSIDE HEAT SINK 3.05 NOM 6.40 6.60 1.84 NOM 5.30 5.45 3.55 NOM L 0.75 0.95 L1 0.50 0.65 W 1.20 1.50 All Dimensions in mm Note: Pins Left & Right must be electrically connected at the printed circuit board. IMPORTANT NOTICE Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the expressed written approval of Diodes Incorporated. DS30549 Rev. 6 - 2 PowerDI is a trademark of Diodes Incorporated. 4 of 4 www.diodes.com PDU420