MMST2222A NPN SMALL SIGNAL SURFACE MOUNT TRANSISTOR Features • • • • Epitaxial Planar Die Construction Complementary PNP Type Available (MMST2907A) Lead Free/RoHS Compliant (Note 2) "Green" Device (Note 3 and 4) C B C Mechanical Data • • • • • • • • • SOT-323 A B Case: SOT-323 Case Material: Molded Plastic, "Green" Molding Compound, Note 4. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). Terminal Connections: See Diagram Marking Information: K3P - See Page 4 Ordering & Date Code Information: See Page 4 Weight: 0.006 grams (approximate) E G H K M J D L C Min Max A 0.25 0.40 B 1.15 1.35 C 2.00 2.20 D 0.65 Nominal E 0.30 0.40 G 1.20 1.40 H 1.80 2.20 J 0.0 0.10 K 0.90 1.00 L 0.25 0.40 M 0.10 0.18 α 0° 8° All Dimensions in mm E B Maximum Ratings E Dim @TA = 25°C unless otherwise specified Characteristic Symbol Value Unit Collector-Base Voltage VCBO 75 V Collector-Emitter Voltage VCEO 40 V Emitter-Base Voltage VEBO 6.0 V Collector Current – Continuous (Note 1) IC 600 mA Power Dissipation (Note 1) Pd 200 mW RθJA 625 °C/W Tj, TSTG -55 to +150 °C Thermal Resistance, Junction to Ambient (Note 1) Operating and Storage Temperature Range Notes: 1. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 2. No purposefully added lead. 3. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 4. Product manufactured with Date Code 0627 (week 27, 2006) and newer are built with Green Molding Compound. Product manufactured prior to Date Code 0627 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS30080 Rev. 9 - 2 1 of 4 www.diodes.com MMST2222A © Diodes Incorporated Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic OFF CHARACTERISTICS (Note 5) Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Symbol Min Max Unit V(BR)CBO V(BR)CEO V(BR)EBO 75 40 6.0 ⎯ ⎯ ⎯ Collector Cutoff Current ICBO ⎯ 10 Collector Cutoff Current Emitter Cutoff Current Base Cutoff Current ON CHARACTERISTICS (Note 5) ICEX IEBO IBL ⎯ ⎯ ⎯ 10 10 20 V V V nA μA nA nA nA hFE 35 50 75 100 40 50 35 VCE(SAT) ⎯ VBE(SAT) 0.6 ⎯ ⎯ ⎯ ⎯ 300 ⎯ ⎯ ⎯ 0.3 1.0 1.2 2.0 Cobo Cibo ⎯ ⎯ 8 25 pF pF Current Gain-Bandwith Product fT 300 ⎯ MHz Noise Figure NF ⎯ 4.0 dB td tr ts tf ⎯ ⎯ ⎯ ⎯ 10 25 225 60 ns ns ns ns DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage SMALL SIGNAL CHARACTERISTICS Output Capacitance Input Capacitance SWITCHING CHARACTERISTICS Delay Time Rise Time Storage Time Fall Time ⎯ V Test Condition IC = 10μA, IE = 0 IC = 10mA, IB = 0 IE = 10μA, IC = 0 VCB = 60V, IE = 0 VCB = 60V, IE = 0, TA = 150°C VCE = 60V, VEB(OFF) = 3.0V VEB = 3.0V, IC = 0 VCE = 60V, VEB(OFF) = 3.0V IC = 100μA, VCE = 10V IC = 1.0mA, VCE = 10V IC = 10mA, VCE = 10V IC = 150mA, VCE = 10V IC = 500mA, VCE = 10V IC = 10mA, VCE = 10V, TA = -55°C IC = 150mA, VCE = 1.0V IC = 150mA, IB = 15mA IC = 500mA, IB = 50mA IC = 150mA, IB = 15mA IC = 500mA, IB = 50mA B B V B B VCB = 10V, f = 1.0MHz, IE = 0 VEB = 0.5V, f = 1.0MHz, IC = 0 VCE = 20V, IC = 20mA, f = 1.0MHz VCE = 10V, IC = 100μA, RS = 1.0kΩ, f = 1.0kHz VCC = 30V, IC = 150mA, VBE(OFF) = -0.5V, IB1 = 15mA VCC = 30V, IC = 150mA, IB1 = IB2 = 15mA 5. Short duration pulse test used to minimize self-heating effect. 1,000 hFE, DC CURRENT GAIN PD, POWER DISSIPATION (mW) 200 150 100 100 10 50 0 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Max Power Dissipation vs. Ambient Temperature 0 25 DS30080 Rev. 9 - 2 2 of 4 www.diodes.com 1 0.1 1 1,000 10 100 IC, COLLECTOR CURRENT (mA) Fig. 2 Typical DC Current Gain vs.Collector Current MMST2222A © Diodes Incorporated 2.0 VCE, COLLECTOR-EMITTER VOLTAGE (V) 100 CAPACITANCE (pF) 30 20 10 5.0 1.0 0.1 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0.001 1.0 10 50 VR, REVERSE VOLTS (V) Fig. 3 Typical Capacitance Characteristics 0.1 10 100 1 IB, BASE CURRENT (mA) Fig. 4 Typical Collector Saturation Region 0.01 1.0 0.5 IC IB = 10 VBE(ON), BASE EMITTER VOLTAGE (V) VCE(SAT), COLLECTOR TO EMITTER SATURATION VOLTAGE (V) 1.8 0.4 TA = 25°C 0.3 TA = 150°C 0.2 0.1 TA = -50°C 0 1 1,000 10 100 IC, COLLECTOR CURRENT (mA) Fig. 5 Collector-Emitter Saturation Voltage vs. Collector Current 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 1 10 100 IC, COLLECTOR CURRENT (mA) Fig. 6 Base-Emitter Voltage vs. Collector Current 1,000 fT, GAIN BANDWIDTH PRODUCT (MHz) VCE = 5V 100 10 1 1 10 100 IC, COLLECTOR CURRENT (mA) Fig. 7 Gain Bandwidth Product vs. Collector Current DS30080 Rev. 9 - 2 3 of 4 www.diodes.com MMST2222A © Diodes Incorporated Ordering Information (Notes 4 & 6) Packaging SOT-323 Device MMST2222A-7-F Notes: Shipping 3000/Tape & Reel 6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YM K3P Date Code Key Year Code 1998 J Month Code Jan 1 1999 K 2000 L Feb 2 K3P = Product Type Marking Code YM = Date Code Marking Y = Year ex: N = 2002 M = Month ex: 9 = September 2001 M Mar 3 2002 N Apr 4 2003 P May 5 2004 R 2005 S Jun 6 2006 T Jul 7 2007 U Aug 8 2008 V Sep 9 2009 W Oct O 2010 X 2011 Y Nov N 2012 Z Dec D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30080 Rev. 9 - 2 4 of 4 www.diodes.com MMST2222A © Diodes Incorporated