MBRS3201T3 200V, 3A Schottky Fast Soft−Recovery Power Rectifier SMC Power Surface Mount Package http://onsemi.com Features • Lower Forward Voltage than any Ultrafast Rectifier: VF < 0.59 V at 150°C SCHOTTKY RECTIFIER 3 AMPS, 200 VOLTS • Fast Switching Speed: Reverse Recovery Time (tRR) < 35 ns • Soft Recovery Characteristics: Softness Factor (tb/ta) 1 • Highly Stable Over Temperature Benefits • • • • Significantly Reduced EMI Eliminates the Need of Snubber Circuits Low Switching and Heat Losses Improved Thermal Management MARKING DIAGRAM Applications • Engine and Convenience Control Systems • Motor Controls • Battery Chargers and Switching Power Supplies YWW B321 Mechanical Characteristics • • • • • • Small Compact Surface Mount Package with J–Bend Leads Rectangular Package for Automated Handling Weight: 217 mg (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Maximum for 10 Seconds Polarity: Notch in Plastic Body Indicates Cathode Lead MAXIMUM RATINGS Characteristic Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 200 V Average Rectified Forward Current (Rated VR, TC = TBD) IF(AV) 3 A Nonrepetitive Peak Surge Current IFSM 100 A TJ −55 to +150 °C Operating Junction Temperature SMC CASE 403 B321 = Specific Device Code Y = Year WW = Work Week ORDERING INFORMATION Device Package Shipping MBRS3201T3 SMC 2500 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. Semiconductor Components Industries, LLC, 2004 October, 2004 − Rev. 0 1 Publication Order Number: MBRS3201T3/D MBRS3201T3 THERMAL CHARACTERISTICS Characteristic Symbol Value Unit Thermal Resistance – Junction−to−Lead RJL 12 °C/W Thermal Resistance – Junction−to−Ambient RJA 60 °C/W Symbol Value Unit ELECTRICAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage VF V (IF = 3 A, TJ = 25°C) (IF = 3 A, TJ = 150°C) 0.84 0.59 Maximum Instantaneous Reverse Current (Rated VR) IR (Rated DC Voltage, TJ = 25°C) (Rated DC Voltage, TJ = 150°C) Maximum Reverse Recovery Time trr 5 5 A mA 35 ns (IF = 1 A, di/dt = 100 A/us, VR = 30 V) 10 25°C 150°C 1.0 100°C 0.1 0.2 IR, REVERSE CURRENT (A) IF, FORWARD CURRENT (A) 100 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 10 25°C 100°C 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 VF, INSTANTANEOUS VOLTAGE (V) VF, INSTANTANEOUS VOLTAGE (V) Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage 1E−1 1E−1 1E−2 1E−2 1E−3 150°C 1E−4 1E−5 100°C 1E−6 1E−7 25°C 1E−8 1E−9 0 150°C 1.0 0.1 0.2 1.2 IR, REVERSE CURRENT (A) IF, FORWARD CURRENT (A) 100 20 40 60 80 100 120 140 160 180 200 1.1 150°C 1E−3 1E−4 1E−5 100°C 1E−6 25°C 1E−7 1E−8 1E−9 0 20 40 60 80 100 120 140 160 180200 VR, REVERSE VOLTAGE (V) VR, REVERSE VOLTAGE (V) Figure 3. Typical Reverse Voltage Figure 4. Maximum Reverse Voltage http://onsemi.com 2 1.2 MBRS3201T3 C, CAPACITANCE (pF) 1000 100 10 1.0 0 20 40 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (V) 4.0 IF, AVERAGE FORWARD CURRENT (A) PFO, AVERAGE POWER DISSIPATION (W) Figure 5. Typical Capacitance 3.5 3.0 2.5 SQUARE 2.0 DC 1.5 1.0 0.5 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 7 6 DC 5 4 SQUAREWAVE 3 2 1 0 80 90 100 110 120 130 140 IO, AVERAGE FORWARD CURRENT TL, LEAD TEMPERATURE (°C) Figure 6. Power Dissipation Figure 7. Derating Curve http://onsemi.com 3 150 160 MBRS3201T3 PACKAGE DIMENSIONS SMC CASE 403−03 ISSUE D S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. 4. 403−01 THRU −02 OBSOLETE, NEW STANDARD 403−03. A D B C K P J INCHES DIM MIN MAX A 0.260 0.280 B 0.220 0.240 C 0.075 0.095 D 0.115 0.121 H 0.0020 0.0060 J 0.006 0.012 K 0.030 0.050 P 0.020 REF S 0.305 0.320 MILLIMETERS MIN MAX 6.60 7.11 5.59 6.10 1.90 2.41 2.92 3.07 0.051 0.152 0.15 0.30 0.76 1.27 0.51 REF 7.75 8.13 H ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. MBRS3201T3/D