Order this document by BC489/D SEMICONDUCTOR TECHNICAL DATA NPN Silicon COLLECTOR 1 2 BASE 3 EMITTER MAXIMUM RATINGS 1 Rating Symbol Value Unit Collector – Emitter Voltage VCEO 80 Vdc Collector – Base Voltage VCBO 80 Vdc Emitter – Base Voltage 2 CASE 29–04, STYLE 17 TO–92 (TO–226AA) VEBO 5.0 Vdc Collector Current — Continuous IC 0.5 Adc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 625 5.0 mW mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 1.5 12 Watt mW/°C TJ, Tstg – 55 to +150 °C Symbol Max Unit Operating and Storage Junction Temperature Range 3 THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Ambient RqJA 200 °C/W Thermal Resistance, Junction to Case RqJC 83.3 °C/W ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Typ Max Unit Collector – Emitter Breakdown Voltage(1) (IC = 10 mAdc, IB = 0) V(BR)CEO 80 — — Vdc Collector – Base Breakdown Voltage (IC = 100 mAdc, IE = 0) V(BR)CBO 80 — — Vdc Emitter – Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO 5.0 — — Vdc ICBO — — 100 nAdc 40 60 100 160 15 — — 160 260 — — 400 250 400 — Characteristic OFF CHARACTERISTICS Collector Cutoff Current (VCB = 60 Vdc, IE = 0) ON CHARACTERISTICS* DC Current Gain (IC = 10 mAdc, VCE = 2.0 Vdc) (IC = 100 mAdc, VCE = 2.0 Vdc) hFE BC489 BC489A BC489B (IC = 1.0 Adc, VCE = 5.0 Vdc)* — 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2%. Motorola Small–Signal Transistors, FETs and Diodes Device Data Motorola, Inc. 1996 1 BC489,A,B ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued) Characteristic Symbol Min Typ Max Unit — — 0.2 0.3 0.5 — — — 0.85 0.9 1.2 — fT — 200 — MHz Output Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Cob — 7.0 — pF Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Cib — 50 — pF ON CHARACTERISTICS* (Continued) Collector – Emitter Saturation Voltage (IC = 500 mAdc, IB = 50 mAdc) (IC = 1.0 Adc, IB = 100 mAdc) VCE(sat) Base – Emitter Saturation Voltage (IC = 500 mAdc, IB = 50 mAdc) (IC = 1.0 Adc, IB = 100 mAdc)(1) VBE(sat) Vdc Vdc DYNAMIC CHARACTERISTICS Current–Gain — Bandwidth Product (IC = 50 mAdc, VCE = 2.0 Vdc, f = 100 MHz) 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%. TURN–ON TIME 100 +10 V RB Vin 0 tr = 3.0 ns 5.0 µF +VBB VCC +40 V –1.0 V 5.0 µs TURN–OFF TIME 100 VCC +40 V 100 RL OUTPUT RB Vin 5.0 µF *CS < 6.0 pF 100 RL OUTPUT *CS < 6.0 pF 5.0 µs tr = 3.0 ns * Total Shunt Capacitance of Test Jig and Connectors For PNP Test Circuits, Reverse All Voltage Polarities Figure 1. Switching Time Test Circuits 2 Motorola Small–Signal Transistors, FETs and Diodes Device Data 300 80 VCE = 2.0 V TJ = 25°C 200 TJ = 25°C 60 40 C, CAPACITANCE (pF) f T, CURRENT–GAIN — BANDWIDTH PRODUCT (MHz) BC489,A,B 100 70 50 Cibo 20 10 8.0 6.0 30 2.0 3.0 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) 4.0 0.1 200 Cobo 0.2 0.5 1.0 2.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Current–Gain — Bandwidth Product 50 100 Figure 3. Capacitance 1.0 k 700 500 ts 300 t, TIME (ns) 200 100 70 50 30 20 tf VCC = 40 V IC/IB = 10 IB1 = IB2 TJ = 25°C 10 5.0 7.0 10 tr td @ VBE(off) = 0.5 V 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) 500 r(t) TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 4. Switching Time 1.0 0.7 0.5 D = 0.5 0.2 0.1 0.3 0.2 P(pk) t1 0.02 0.1 0.07 0.05 t2 DUTY CYCLE, D = t1/t2 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 (SEE AN–469) TJ(pk) – TC = P(pk) ZθJC(t) TJ(pk) – TA = P(pk) ZθJA(t) 0.01 SINGLE PULSE 0.03 SINGLE PULSE ZθJC(t) = r(t) • RθJC ZθJA(t) = r(t) • RθJA 0.02 0.01 1.0 2.0 5.0 10 20 50 100 200 500 t, TIME (ms) 1.0 k 2.0 k 5.0 k 10 k 20 k 50 k 100 k Figure 5. Thermal Response Motorola Small–Signal Transistors, FETs and Diodes Device Data 3 IC, COLLECTOR CURRENT (mA) BC489,A,B 1.0 k 700 500 100 µs 1.0 ms 1.0 s 300 200 TC = 25°C TA = 25°C 100 70 50 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT 30 20 BC489 10 1.0 20 30 50 2.0 3.0 5.0 7.0 10 VCE, COLLECTOR–EMITTER VOLTAGE (VOLTS) 70 100 Figure 6. Active Region — Safe Operating Area 400 hFE , DC CURRENT GAIN TJ =125°C VCE = 1.0 V 200 25°C –55°C 100 80 60 40 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 200 300 500 VCE , COLLECTOR–EMITTER VOLTAGE (VOLTS) Figure 7. DC Current Gain 1.0 TJ = 25°C V, VOLTAGE (VOLTS) 0.8 VBE(sat) @ IC/IB = 10 0.6 VBE(on) @ VCE = 1.0 V 0.4 0.2 VCE(sat) @ IC/IB = 10 0 0.5 1.0 2.0 5.0 10 50 100 20 IC, COLLECTOR CURRENT (mA) Figure 8. “On” Voltages 4 200 500 1.0 TJ = 25°C 0.8 0.6 50 IC = 10 mA mA 100 mA 250 mA 500 mA 0.4 0.2 0 0.05 0.1 0.2 0.5 2.0 5.0 1.0 10 IC, COLLECTOR CURRENT (mA) 20 50 Figure 9. Collector Saturation Region Motorola Small–Signal Transistors, FETs and Diodes Device Data –0.8 –1.0 –1.2 –0.8 TJ = 25°C V, VOLTAGE (VOLTS) RθVB, TEMPERATURE COEFFICIENT (mV/°C) BC489,A,B –1.6 RθVB for VBE –2.0 VBE(sat) @ IC/IB = 10 –0.6 VBE(on) @ VCE = –1.0 V –0.4 –0.2 –2.4 VCE(sat) @ IC/IB = 10 –2.8 0.5 1.0 2.0 5.0 20 50 10 100 IC, COLLECTOR CURRENT (mA) 200 0 –0.5 500 –1.0 –2.0 –1.0 TJ = 25°C –0.8 –0.6 –0.4 IC = –10 mA –50 mA –100 mA –250 mA –500 mA –0.2 0 –0.05 –0.1 –0.2 –0.5 –1.0 –2.0 –5.0 IB, BASE CURRENT (mA) –10 –20 –500 Figure 11. “On” Voltages RθVB, TEMPERATURE COEFFICIENT (mV/°C) VCE , COLLECTOR–EMITTER VOLTAGE (VOLTS) Figure 10. Base–Emitter Temperature Coefficient –5.0 –10 –20 –50 –100 –200 IC, COLLECTOR CURRENT (mA) –50 Figure 12. Collector Saturation Region Motorola Small–Signal Transistors, FETs and Diodes Device Data –0.8 –1.2 –1.6 RθVB for VBE –2.0 –2.4 –2.8 –0.5 –1.0 –2.0 –5.0 –10 –20 –50 –100 –200 IC, COLLECTOR CURRENT (mA) –500 Figure 13. Base–Emitter Temperature Coefficient 5 BC489,A,B PACKAGE DIMENSIONS A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L F SEATING PLANE K DIM A B C D F G H J K L N P R V D J X X G H V C 1 SECTION X–X N N CASE 029–04 (TO–226AA) ISSUE AD INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 ––– 0.250 ––– 0.080 0.105 ––– 0.100 0.115 ––– 0.135 ––– MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 ––– 6.35 ––– 2.04 2.66 ––– 2.54 2.93 ––– 3.43 ––– STYLE 17: PIN 1. COLLECTOR 2. BASE 3. EMITTER Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 MFAX: [email protected] – TOUCHTONE 602–244–6609 INTERNET: http://Design–NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 6 ◊ *BC489/D* BC489/D Motorola Small–Signal Transistors, FETs and Diodes Device Data