Order this document by MJE18204/D SEMICONDUCTOR TECHNICAL DATA $#!% #)% %"& &'#% #% !'%#" ' !!&' " ) ' " #)% ($$!* $$! ' #"& POWER TRANSISTORS 5 AMPERES 1200 VOLTS 35 and 75 WATTS The MJE/MJF18204 have an application specific state–of–the–art die dedicated to the electronic ballast (“light ballast”) and power supply applications. • Improved Global Efficiency Due to Low Base Drive Requirements: — High and Flat DC Current Gain hFE — Fast Switching — No Coil Required in Base Circuit for Fast Turn–Off (No Current Tail) • Full Characterization at 125_C • Motorola “6 SIGMA” Philosophy Provides Tight and Reproducible Parametric Distributions • Two Package Choices: Standard TO–220 or Isolated TO–220 ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ v ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ MAXIMUM RATINGS Rating Symbol MJE18204 MJF18204 Unit Collector–Emitter Voltage VCEO 600 Vdc Collector–Base Voltage VCBO 1200 Vdc Collector–Emitter Voltage VCES 1200 Vdc Emitter–Base Voltage VEBO 10 Vdc Collector Current — Continuous — Peak (1) IC ICM 5 10 Adc Base Current — Continuous — Peak (1) IB IBM 2 4 Adc RMS Isolation Voltage (2) (for 1 sec, R.H. ≤ 30%) TC = 25°C Per Figure 22 Per Figure 23 Per Figure 24 *Total Device Dissipation @ TC = 25°C *Derate above 25_C Operating and Storage Temperature VISOL1 VISOL2 VISOL3 PD TJ, Tstg 75 0.6 4500 3500 1500 Volts 35 0.28 Watt W/_C – 65 to 150 CASE 221A–06 TO–220AB _C THERMAL CHARACTERISTICS Rating Symbol MJE18204 MJF18204 Unit Thermal Resistance — Junction to Case — Junction to Ambient RθJC RθJA 1.65 62.5 3.55 62.5 _C/W Maximum Lead Temperature for Soldering Purposes: 1/8″ from Case for 5 Seconds TL 260 _C CASE 221D–02 TO–220 FULLPACK (1) Pulse Test: Pulse Width = 5 ms, Duty Cycle 10%. (2) Proper strike and creepage distance must be provided. Designer’s Data for “Worst Case” Conditions — The Designer’s Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit curves — representing boundaries on device characteristics — are given to facilitate “worst case” design. Designer’s and SWITCHMODE are trademarks of Motorola, Inc. Motorola, Inc. 1995 Motorola Bipolar Power Transistor Device Data 1 ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit VCEO 600 660 VCEO(sus) VCER(sus) 550 600 630 700 Collector–Base Breakdown Voltage (ICBO = 1 mA, IE = 0) VCBO 1200 1300 Vdc Emitter–Base Breakdown Voltage (IEBO = 1 mA, IC = 0) VEBO 10 12.9 Vdc OFF CHARACTERISTICS Collector–Emitter Voltage (IC = 1 mA, IB = 0) Collector–Emitter Sustaining Voltage (IC = 100 mA, L = 25 mH) (IC = 200 mA, L = 25 mH, R = 2 Ω) Vdc Vdc Collector Cutoff Current (VCE = 600 V, IB = 0) Collector Cutoff Current (VCE = 550 V, IB = 0) @ TC = 25°C @ TC = 125°C ICEO 200 2000 µAdc Collector Cutoff Current (VCE = Rated VCES, VBE = 0) @ TC = 25°C @ TC = 125°C @ TC = 125°C ICES 100 500 100 µAdc Collector Cutoff Current (VCB = Rated VCB, IE = 0) ICBO 100 µAdc Emitter–Cutoff Current (VEB = 10 Vdc, IC = 0) IEBO 100 µAdc Collector Cutoff Current (VCE = 1000 V, VBE = 0) ON CHARACTERISTICS Base–Emitter Saturation Voltage (IC = 1 Adc, IB = 0.1 Adc) (IC = 2 Adc, IB = 0.4 Adc) VBE(sat) Vdc 0.83 0.92 1.1 1.25 @ TC = 25°C @ TC = 125°C 0.3 0.7 1 1.25 @ TC = 25°C @ TC = 125°C 0.3 0.8 0.6 1.25 VCE(sat) Collector–Emitter Saturation Voltage (IC = 1 Adc, IB = 0.1 Adc) (IC = 2 Adc, IB = 0.4 Adc) Vdc hFE DC Current Gain (IC = 0.5 Adc, VCE = 3 Vdc) 18 @ TC = 25°C @ TC = 125°C 10 8 13 (IC = 2 Adc, VCE = 1 Vdc) @ TC = 25°C @ TC = 125°C 5 4 8 6 — (IC = 5 mAdc, VCE = 5 Vdc) @ TC = 25°C @ TC = 125°C 10 25 33 — 13 MHz (IC = 1 Adc, VCE = 1 Vdc) 35 — @ TC = 25°C @ TC = 125°C 23 22 DYNAMIC CHARACTERISTICS Current Gain Bandwidth (IC = 0.5 Adc, VCE = 10 Vdc, f = 1 MHz) Output Capacitance (VCB = 10 Vdc, IE = 0, f = 1 MHz) Input Capacitance (VEB = 8 Vdc) fT Cob 200 pF Cib 2000 pF DYNAMIC SATURATION VOLTAGE Dynamic Saturation Voltage: Determined 1 µs and 3 µs respectively after rising IB1 reaches 90% of final IB1 2 IC = 2 Adc IB1 = 660 mAdc VCC = 300 V @ 3 µs IC = 2 Adc IB1 = 0.4 Adc VCC = 300 V @ 3 µs @ TC = 25°C VCE(dsat) 2.5 @ TC = 125°C 7.5 @ TC = 25°C 7 @ TC = 125°C 15 V Motorola Bipolar Power Transistor Device Data ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit SWITCHING CHARACTERISTICS: Resistive Load (D.C. ≤ 10%, Pulse Width = 20 µs) Turn–on Time Turn–off Time Turn–on Time Turn–off Time IC = 2 Adc, IB1 = 0.4 Adc IB2 = 1 Adc VCC = 300 Vdc @ TC = 25°C ton 105 175 ns @ TC = 25°C toff 1.75 2.5 µs IC = 2 Adc, IB1 = 0.4 Adc IB2 = 0.4 Adc VCC = 300 Vdc @ TC = 25°C ton 95 200 ns @ TC = 25°C toff 3.5 4.5 µs 150 ns @ TC = 25°C td 70 IC = 0.7 Adc, IB1 = 50 mAdc IB2 = 0.4 Adc VCC = 125 Vdc PW = 70 µs tr 210 400 ns ts 0.9 1.2 µs tf 275 450 ns Turn–on Time Turn–off Time @ TC = 25°C SWITCHING CHARACTERISTICS: Inductive Load (Vclamp = 300 V, VCC = 15 V, L = 200 µH) Fall Time @ TC = 25°C @ TC = 125°C tf 110 95 175 ns @ TC = 25°C @ TC = 125°C ts 1.35 1.9 2 µs Crossover Time @ TC = 25°C @ TC = 125°C tc 150 115 250 ns Fall Time @ TC = 25°C @ TC = 125°C tf 120 180 200 ns @ TC = 25°C @ TC = 125°C ts 1.9 2.35 2.75 µs @ TC = 25°C @ TC = 125°C tc 190 180 300 ns @ TC = 25°C tf 185 300 ns @ TC = 25°C ts 4 5 µs @ TC = 25°C tc 350 500 ns Storage Time Storage Time IC = 1 Adc IB1 = 0.1 Adc IB2 = 0.5 Adc IC = 2 Adc IB1 = 0.4 Adc IB2 = 1 Adc Crossover Time Fall Time Storage Time Crossover Time IC = 2 Adc IB1 = 0.4 Adc IB2 = 0.4 Adc Motorola Bipolar Power Transistor Device Data 3 TYPICAL STATIC CHARACTERISTICS 100 100 10 TJ = 25°C TJ = 125°C hFE , DC CURRENT GAIN hFE , DC CURRENT GAIN TJ = 125°C VCE = 1 V TJ = – 20°C 1 0.01 0.1 1 IC, COLLECTOR CURRENT (AMPS) 10 TJ = – 20°C 1 0.01 10 Figure 1. DC Current Gain @ 1 Volt 10 2 VCE = 5 V TJ = 25°C VCE , VOLTAGE (VOLTS) TJ = 125°C hFE , DC CURRENT GAIN 0.1 1 IC, COLLECTOR CURRENT (AMPS) Figure 2. DC Current Gain @ 3 Volts 100 10 VCE = 3 V TJ = 25°C TJ = 25°C TJ = – 20°C 4A 3A 1 2A 1.5 A IC = 1 A 1 0.01 0 0.1 1 IC, COLLECTOR CURRENT (AMPS) 10 10 100 1000 IB, BASE CURRENT (mA) Figure 4. Collector Saturation Region Figure 3. DC Current Gain @ 5 Volts 10 1.5 1 VBE , VOLTAGE (VOLTS) VCE , VOLTAGE (VOLTS) IC/IB = 10 IC/IB = 5 0.1 TJ = 125°C TJ = 25°C 0.01 0.01 0.1 1 IC, COLLECTOR CURRENT (AMPS) Figure 5. Collector–Emitter Saturation Voltage 4 10000 10 1 TJ = – 20°C 0.5 TJ = 25°C TJ = 125°C 0 0.01 IC/IB = 5 IC/IB = 10 0.1 1 IC, COLLECTOR CURRENT (AMPS) Figure 6. Base–Emitter Saturation Region Motorola Bipolar Power Transistor Device Data 10 TYPICAL STATIC CHARACTERISTICS 10000 1600 1400 IC/IB = 10 1200 1000 Cib (pF) t, TIME (ns) C, CAPACITANCE (pF) TJ = 25°C f(test) = 1 MHz Cob (pF) 100 1000 IC/IB = 5 800 600 TJ = 125°C TJ = 25°C 400 IB1 = IB2 VCC = 300 V PW = 20 µs 200 10 1 10 VR, REVERSE VOLTAGE (VOLTS) 0 100 0.5 Figure 7. Capacitance 4.5 5 Figure 8. Resistive Switching, ton 8 6 TJ = 125°C TJ = 25°C 7 6 TJ = 125°C TJ = 25°C IB1 = IB2 VCC = 300 V PW = 20 µs 5 IC/IB = 5 t, TIME (ns) t, TIME ( µs) 2 2.5 3 3.5 4 1.5 IC, COLLECTOR CURRENT (AMPS) 1 5 4 3 IB1 = IB2 VCC = 15 V VZ = 300 V LC = 200 µH 4 IC/IB = 5 3 IC/IB = 10 2 IC/IB = 10 1 2 0.5 1 1.5 2 2.5 3 3.5 4 IC, COLLECTOR CURRENT (AMPS) 4.5 5 0.5 Figure 9. Resistive Switching, toff 2 2.5 1.5 IC, COLLECTOR CURRENT (AMPS) 3 3.5 Figure 10. Inductive Storage Time, tsi 6 1500 IB1 = IB2 VCC = 15 V VZ = 300 V LC = 200 µH IC = 1 A 5 IB1 = IB2 VCC = 15 V VZ = 300 V LC = 200 µH 1000 t, TIME (ns) t si , STORAGE TIME (µs) 1 4 TJ = 125°C TJ = 25°C tc tfi tc 500 IC = 2 A 3 3 5 tfi TJ = 125°C TJ = 25°C 7 11 9 hFE, FORCED GAIN 13 Figure 11. Inductive Storage Time, tsi (hFE) Motorola Bipolar Power Transistor Device Data 15 0 0 1 2 IC, COLLECTOR CURRENT (AMPS) 3 Figure 12. Inductive Switching, tc & tfi @ IC/IB = 5 5 TYPICAL STATIC CHARACTERISTICS 1100 680 900 800 tc 700 t, TIME (ns) t fi , FALL TIME (ns) TJ = 125°C TJ = 25°C IBoff = IB2 VCC = 15 V VZ = 300 V LC = 200 µH 1000 600 500 400 300 IBoff = IB2 VCC = 15 V VZ = 300 V LC = 200 µH 480 TJ = 125°C TJ = 25°C IC = 2 A IC = 1 A 280 tfi 200 100 80 1 2 3 IC, COLLECTOR CURRENT (AMPS) 0 5 3 4 Figure 13. Inductive Switching, tc & tfi @ IC/IB = 10 11 9 hFE, FORCED GAIN 13 15 Figure 14. Inductive Fall Time 1400 1200 TJ = 125°C TJ = 25°C 1000 IB1 = IB2 VCC = 15 V VZ = 300 V LC = 200 µH IC = 2 A TJ = 25°C 1300 1200 BVCER (VOLTS) t c , CROSSOVER TIME (ns) 7 800 600 BVCER (VOLTS) @ 10 mA 1100 1000 900 800 400 IC = 1 A BVCER(sus) @ 200 mA 700 600 200 3 4 5 6 7 8 9 10 11 hFE, FORCED GAIN 12 13 10 15 14 100 RBE (Ω) Figure 16. BVCER = f (RBE) Figure 15. Inductive Crossover Time IC, COLLECTOR CURRENT (AMPS) 6 1 µs 10 5 ms 1 ms 10 µs 1 MJE18204–DC EXTENDED SOA IC, COLLECTOR CURRENT (AMPS) 100 0.1 MJF18204–DC 0.01 TC ≤ 125°C GAIN ≥ 5 LC = 4 mH 5 4 3 2 –5 V 1 –1.5 V 0V 0 10 100 VCE, COLLECTOR–EMITTER VOLTAGE (VOLTS) 1000 Figure 17. Forward Bias Safe Operating Area 6 1000 400 600 800 500 700 900 1000 1100 VCE, COLLECTOR–EMITTER VOLTAGE (VOLTS) Figure 18. Reverse Bias Switching Safe Operating Area Motorola Bipolar Power Transistor Device Data 1200 TYPICAL STATIC CHARACTERISTICS POWER DERATING FACTOR 1.0 SECOND BREAKDOWN DERATING 0.8 0.6 0.4 THERMAL DERATING 0.2 0 20 40 60 80 100 120 TC, CASE TEMPERATURE (°C) 140 Figure 19. Forward Bias Power Derating 160 There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC–VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 19 is based on T C = 25°C; T J (pk) is variable depending on power level. Second breakdown pulse limits are valid for duty cycles to 10% but must be derated when TC > 25°C. Second breakdown limitations do not derate the same as thermal limitations. Allowable current at the voltages shown on Figure 16 may be found at any case temperature by using the appropriate curve on Figure 18. TJ(pk) may be calculated from the data in Figures 21 and 22. At any case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. For inductive loads, high voltage and current must be sustained simultaneously during turn–off with the base–to–emitter junction reverse biased. The safe level is specified as a reverse–biased safe operating area (Figure 17). This rating is verified under clamped conditions so that the device is never subjected to an avalanche mode. TYPICAL SWITCHING CHARACTERISTICS (IB1 = IB2 FOR ALL CURVES) 10 VCE 9 dyn 1 µs IC 90% IC 8 dyn 3 µs tfi tsi 7 6 0V Vclamp 5 10% IC 10% Vclamp tc 4 IB 90% IB 3 1 µs 2 IB 90% IB1 1 2 1 3 µs 0 TIME Figure 20. Dynamic Saturation Voltage Measurements Motorola Bipolar Power Transistor Device Data 0 3 4 5 6 8 7 TIME Figure 21. Inductive Switching Measurements 7 TYPICAL SWITCHING CHARACTERISTICS (IB1 = IB2 FOR ALL CURVES) Table 1. Inductive Load Switching Drive Circuit +15 V 1 µF 100 µF MTP8P10 100 Ω 3W 150 Ω 3W MTP8P10 RB1 MPF930 MUR105 Iout MPF930 +10 V A 50 Ω RB2 MJE210 COMMON MTP12N10 150 Ω 3W 500 µF 1 µF –Voff IC PEAK VCE PEAK VCE IB1 IB IB2 V(BR)CEO(sus) L = 10 mH RB2 = ∞ VCC = 20 Volts IC(pk) = 100 mA 8 Inductive Switching L = 200 µH RB2 = 0 VCC = 15 Volts RB1 selected for desired IB1 RBSOA L = 500 µH RB2 = 0 VCC = 15 Volts RB1 selected for desired IB1 Motorola Bipolar Power Transistor Device Data TYPICAL THERMAL RESPONSE (IB1 = IB2 FOR ALL CURVES) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1 D = 0.5 0.2 0.1 0.1 P(pk) 0.05 0.02 t1 t2 DUTY CYCLE, D = t1/t2 SINGLE PULSE 0.01 0.01 0.1 1 10 RθJC(t) = r(t) RθJC RθJC = 1.65°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) – TC = P(pk) RθJC(t) 100 1000 t, TIME (ms) Figure 22. Typical Thermal Response (ZθJC(t)) for MJE18204 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1 D = 0.5 0.2 P(pk) 0.1 0.1 t1 0.05 t2 DUTY CYCLE, D = t1/t2 0.02 0.01 0.01 RθJC(t) = r(t) RθJC RθJC = 3.55°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) – TC = P(pk) RθJC(t) SINGLE PULSE 0.1 1 10 100 1000 10000 100000 t, TIME (ms) Figure 23. Typical Thermal Response (ZθJC(t)) for MJF18204 Motorola Bipolar Power Transistor Device Data 9 TEST CONDITIONS FOR ISOLATION TESTS* CLIP MOUNTED FULLY ISOLATED PACKAGE CLIP LEADS HEATSINK MOUNTED FULLY ISOLATED PACKAGE 0.107″ MIN MOUNTED FULLY ISOLATED PACKAGE LEADS LEADS HEATSINK HEATSINK 0.107″ MIN 0.110″ MIN Figure 24. Screw or Clip Mounting Position for Isolation Test Number 1 Figure 25. Clip Mounting Position for Isolation Test Number 2 Figure 26. Screw Mounting Position for Isolation Test Number 3 * Measurement made between leads and heatsink with all leads shorted together MOUNTING INFORMATION** 4–40 SCREW CLIP PLAIN WASHER HEATSINK COMPRESSION WASHER HEATSINK NUT Figure 27a. Screw–Mounted Figure 27b. Clip–Mounted Figure 27. Typical Mounting Techniques for Isolated Package Laboratory tests on a limited number of samples indicate, when using the screw and compression washer mounting technique, a screw torque of 6 to 8 in . lbs is sufficient to provide maximum power dissipation capability. The compression washer helps to maintain a constant pressure on the package over time and during large temperature excursions. Destructive laboratory tests show that using a hex head 4–40 screw, without washers, and applying a torque in excess of 20 in . lbs will cause the plastic to crack around the mounting hole, resulting in a loss of isolation capability. Additional tests on slotted 4–40 screws indicate that the screw slot fails between 15 to 20 in . lbs without adversely affecting the package. However, in order to positively ensure the package integrity of the fully isolated device, Motorola does not recommend exceeding 10 in . lbs of mounting torque under any mounting conditions. ** For more information about mounting power semiconductors see Application Note AN1040. 10 Motorola Bipolar Power Transistor Device Data PACKAGE DIMENSIONS B –T– F SEATING PLANE C T 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. S A Q 1 2 3 H DIM A B C D F G H J K L N Q R S T U V Z U K Z L R V J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ––– ––– 0.080 STYLE 1: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ––– ––– 2.04 BASE COLLECTOR EMITTER COLLECTOR CASE 221A–06 TO–220AB ISSUE Y –T– –B– F SEATING PLANE C S Q NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. U A 1 2 3 H –Y– K G N L D J R 3 PL 0.25 (0.010) M B M Y DIM A B C D F G H J K L N Q R S U INCHES MIN MAX 0.621 0.629 0.394 0.402 0.181 0.189 0.026 0.034 0.121 0.129 0.100 BSC 0.123 0.129 0.018 0.025 0.500 0.562 0.045 0.060 0.200 BSC 0.126 0.134 0.107 0.111 0.096 0.104 0.259 0.267 MILLIMETERS MIN MAX 15.78 15.97 10.01 10.21 4.60 4.80 0.67 0.86 3.08 3.27 2.54 BSC 3.13 3.27 0.46 0.64 12.70 14.27 1.14 1.52 5.08 BSC 3.21 3.40 2.72 2.81 2.44 2.64 6.58 6.78 STYLE 1: PIN 1. GATE 2. DRAIN 3. SOURCE CASE 221D–02 (ISOLATED TO–220 TYPE) UL RECOGNIZED: FILE #E69369 ISSUE D Motorola Bipolar Power Transistor Device Data 11 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 MFAX: [email protected] – TOUCHTONE (602) 244–6609 INTERNET: http://Design–NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 12 ◊ Motorola Bipolar Power Transistor Device Data *MJE18204/D* MJE18204/D