BR600 - BR610 SILICON BRIDGE RECTIFIERS PRV : 50 - 1000 Volts BR6 Io : 6.0 Amperes 0.158 (4.00) 0.142 (3.60) FEATURES : * * * * * * 0.445 (11.30) 0.405 (10.30) High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Ideal for printed circuit board AC 0.62 (15.75) 0.58 (14.73) 0.127 (3.20) 0.047 (1.20) AC 0.042 (1.06) 0.038 (0.96) MECHANICAL DATA : * Case : Reliable low cost construction utilizing molded plastic technique * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL - STD 202 , Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 3.6 grams 0.75 (19.1) Min. 0.27 (6.9) 0.23 (5.8) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherw ise specified. Single phase, half w ave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL BR600 BR601 BR602 BR604 BR606 BR608 BR610 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Current Tc=50°C IF(AV) 6.0 Amps. IFSM 200 Amps. Current Squared Time at t < 8.3 ms. I2t 64 A2S Maximum Forward Voltage per Diode at IF =3 A. VF 1.0 Volts Peak Forward Surge Current, Single half sine wave Superimposed on rated load (JEDEC Method) Maximum DC Reverse Current Ta = 25 °C IR 10 µA at Rated DC Blocking Voltage Ta = 100 °C IR(H) 200 µA RθJC 8.0 °C/W TJ - 40 to + 150 °C TSTG - 40 to + 150 °C Typical Thermal Resistance (Note 1) Operating Junction Temperature Range Storage Temperature Range Notes : 1. Thermal Resistance from junction to case w ith units mounted on a 2.6" x 1.4" x 0.06" THK (6.5cm.x 3.5cm.x 0.15cm.) Al. Plate. Heatsink. UPDATE : APRIL 23, 1998 FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES RATING AND CHARACTERISTIC CURVES ( BR600 - BR610 ) 6.0 5.0 4.0 3.0 2.0 1.0 HEAT-SINK MOUNTING, Tc 2.6" x 1.4" x 0.06" THK. (6.5cm x 3.5cm x 0.15cm) Al.-PLATE 240 200 TJ = 50 °C 160 120 80 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 40 0 0 0 25 50 75 100 125 150 175 1 CASE TEMPERATURE, ( °C) PER DIODE FORWARD CURRENT, AMPERES 100 10 Pulse Width = 300 µs 1 % Duty Cycle TJ = 25 °C 0.1 REVERSE CURRENT, MICROAMPERES FIG.3 - TYPICAL FORWARD CHARACTERISTICS 1.0 2 4 6 10 20 40 60 FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER DIODE 10 TJ = 100 °C 1.0 0.1 0.01 TJ = 25 °C 0 20 40 60 80 100 120 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE, VOLTS 100 NUMBER OF CYCLES AT 60Hz 1.8 140