HRS FH23-51S

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
FH 23 Series
●Staggered termination configuration. Only 1.25 mm above the board.
Leadless type
Completely enclosed
bottom surface
Lead type
1.25mm
■Features
1. FPC low insertion force and high holding force
Hirose Electric's unique low insertion force (LIF) design
(patents pending) improves the Flexible Printed Circuit
(FPC) holding force after insertion.
FPC insertion force:Reduced approximately 36%
(as compared with FH18 Series connectors).
FPC holding force:Improvement of approximately 22%
(as compared with FH18 Series connectors).
2. Temporary hold of FPC
There is no need to hold the FPC after insertion in the
connector. The connector will hold it in correct position,
allowing closing of the actuator.
When the actuator is opened
3. Easy board mounting
The surface mounted termination of the contacts is staggered on
0.6 mm centers, positioned on front and back of the connector.
Bottom of the connector is completely insulated, allowing
conductive traces on PCB to run under the connector.
4. Proven Flip-lock Actuator assures easy and
reliable operation
Rotating actuator permits easy insertion and reliable connection
with the FPC. Tactile sensation confirms complete mechanical
locking of the actuator and the electrical connection.
5. Variations to suit different mounting areas
Available with lead and leadless type of terminations
(for opposing FPC insertion side).
6. Designed for placement with automatic equipment
Temporary hold of FPC
Flat top surface allows pick-up with vacuum nozzles.
Packaged in embossed tape, on reel. One reel contains 2,500 pieces.
7. Accepts 0.2mm thick FPC
8. Variety of contact positions
Available with 15,17,21,23,25,27,31,33,39,45,51,61and 71 pos.
8. Environmental considerations
Plating is lead-free in order to protect environment.
■Applications
Mobile phones, PDA’s, digital cameras, digital video
cameras and other compact devices requiring
interconnections of the main circuit with the LCD,
plasma display (PDP), camera module, or other devices.
When the actuator is closed
2004.6
1
■Product Specifications
Current rating
0.3 A DC
Voltage rating
30 V AC
Operating temperature range
-55 ç to +85ç (Note 1)
Operating humidity range
Relative humidity 90% max. (No condensation)
Ratings
Recommended FPC
Thickness: = 0.2±0.03mm Tin-lead plating (Note 3)
Item
Specification
Conditions
1. Insulation resistance 50 M ohms min.
2. Withstanding voltage No flashover or insulation breakdown
100 V DC
90 V AC/one minute
100 m ohms max.
*Including FPC/FFC conductor resistance
3. Contact resistance
Storage temperature range
-10ç to +50ç (Note 2)
Storage humidity range
Relative humidity 90% max.
1 mA AC
Contact resistance: 100 m ohms max.
4. Durability
4. (insertion/ withdrawal) No damage, cracks, or parts dislocation.
10 cycles
5. Vibration
No electrical discontinuity of 1 µs or more.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles,
3 axis.
6. Shock
No electrical discontinuity of 1 µs. min.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Acceleration of 981 m/s 2 , 6ms duration, sine half-wave
waveform, 3 cycles, 3 axis.
7. Humidity
(Steady state)
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No damage, cracks, or parts dislocation.
96 hours at temperature of 40°C and humidity of 90% to 95%
8. Temperature cycle
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No damage, cracks, or parts looseness.
Temperature:-55ç/+15ç to +35ç/+85ç/+15ç to +35ç
Time: 30/ 2 to 3 / 30 / 2 to 3 (Minutes)
5 cycles
9. Resistance to
soldering heat
No deformation of
components affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 350 ç±5 ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating
Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage,
shipment or during transportation.
Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification.
■Materials
Part
Material
Insulator
Finish
LCP
Color:Beige
LCP
Color:Black
Phosphor bronze
Contacts
Remarks
UL94V-0
Tin-lead plating (Note 3)
■Ordering information
FH23
1
- 39S - 0.3 SHW (05)
2
1 Series name : FH23
2 No. of contacts.
Number of contacts : 15,17,21,23,25,27,31,33,39,45,51,61,71
3 Contact pitch: 0.3 mm
2
3
4
5
4 Terminal type
SHW: SMT horizontal mounting type, lead type termination.
SHAW: SMT horizontal mounting type, lead-less type termination.
5 Plating specifications :
(05)
: Gold plating
(51)
: Tin-lead plating
---------------
BConnector Dimensions (Lead Type termination)
A
0.3
B
1.7
(0.15)
0.6
Number of contacts indicator
1.25(Including contact terminal leads)
2.45
0.6
(0.12)
(2.84)
C
0.05MAX.
0.05MAX.
E
0.1MAX.
0.55
(D: FPC insertion area dimensions)
1
4.15
0.5
2
0.1MAX.
1
2
Notes 1 The coplanarity of each terminal lead is within 0.1.
2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.
3 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
Lead Type
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FH23-15S-0.3SHW(51)
586-1317-0-51
15
17.0
13.6
14.2
14.83
FH23-17S-0.3SHW(51)
586-1300-7-51
17
17.6
14.2
14.8
15.43
FH23-21S-0.3SHW(51)
586-1314-1-51
21
18.8
15.4
16.0
16.63
FH23-23S-0.3SHW(51)
586-1324-5-51
23
19.4
16.0
16.6
17.23
FH23-25S-0.3SHW(51)
586-1322-0-51
25
10.0
16.6
17.2
17.83
FH23-27S-0.3SHW(51)
586-1308-9-51
27
10.6
17.2
17.8
18.43
FH23-31S-0.3SHW(51)
586-1302-2-51
31
11.8
18.4
19.0
19.63
FH23-33S-0.3SHW(51)
586-1304-8-51
33
12.4
19.0
19.6
10.23
FH23-39S-0.3SHW(51)
586-1306-3-51
39
14.2
10.8
11.4
12.03
FH23-45S-0.3SHW(51)
586-1318-2-51
45
16.0
12.6
13.2
13.83
FH23-51S-0.3SHW(51)
586-1312-6-51
51
17.8
14.4
15.0
15.63
FH23-61S-0.3SHW(51)
586-1310-0-51
61
20.8
17.4
18.0
18.63
FH23-71S-0.3SHW(51)
586-1320-4-51
71
23.8
20.4
21.0
21.63
Note: Embossed tape reel packaging(2,500 pieces/reel)
Order by number of reels.
3
■Connector Dimensions Diagram (Leadless Type termination)
A
0.3
1.7
B
(0.15)
1.25 (Including contact terminal leads)
2.45
0.6
**
0.6
Number of contacts indicator
(0.12)
(2.84)
C
0.05MAX.
0.1MAX.
(D: FPC insertion area dimensions)
1
0.05MAX.
E
0.55
0.1MAX.
4.15
2
1
2
Notes 1 The coplanarity of each terminal lead is within 0.1.
2 The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.
3 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
Leadless Type
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FH23-15S-0.3SHAW(51)
586-1316-7-51
15
17.0
13.6
14.2
14.83
FH23-17S-0.3SHAW(51)
586-1301-0-51
17
17.6
14.2
14.8
15.43
FH23-21S-0.3SHAW(51)
586-1315-4-51
21
18.8
15.4
16.0
16.63
FH23-23S-0.3SHAW(51)
586-1325-8-51
23
19.4
16.0
16.6
17.23
FH23-25S-0.3SHAW(51)
586-1323-2-51
25
10.0
16.6
17.2
17.83
FH23-27S-0.3SHAW(51)
586-1309-1-51
27
10.6
17.2
17.8
18.43
FH23-31S-0.3SHAW(51)
586-1303-5-51
31
11.8
18.4
19.0
19.63
FH23-33S-0.3SHAW(51)
586-1305-0-51
33
12.4
19.0
19.6
10.23
FH23-39S-0.3SHAW(51)
586-1307-6-51
39
14.2
10.8
11.4
12.03
FH23-45S-0.3SHAW(51)
586-1319-5-51
45
16.0
12.6
13.2
13.83
FH23-51S-0.3SHAW(51)
586-1313-9-51
51
17.8
14.4
15.0
15.63
FH23-61S-0.3SHAW(51)
586-1311-3-51
61
20.8
17.4
18.0
18.63
FH23-71S-0.3SHAW(51)
586-1321-7-51
71
23.8
20.4
21.0
21.63
Note: Embossed tape reel packaging(2,500 pieces/reel)
Order by number of reels.
4
BRecommended PCB Land and Metal Mask Dimensions (Lead Type)
(5.2)
3.45±0.05
(0.1)
0.3±0.05 (Land)
0.25±0.05 (Metal mask)
0.3±0.05
1.25±0.05
(5.4)
0.7±0.05
B±0.05
0.6±0.05
0.3±0.05 (Land)
0.25±0.05 (Metal mask)
(0.1)
Recommended metal mask thickness: t = 0.1 mm
0.6±0.05
C±0.05
Lead Type
Part Number
Unit: mm
CL No.
Number of Contacts
B
C
G
Part Number
CL No.
Number of Contacts
FH23-15S-0.3SHW(51)
586-1317-0-51
15
03.6 04.2 04.8
FH23-17S-0.3SHW(51)
586-1300-7-51
17
FH23-21S-0.3SHW(51)
586-1314-1-51
21
FH23-23S-0.3SHW(51)
586-1324-5-51
FH23-25S-0.3SHW(51)
FH23-27S-0.3SHW(51)
FH23-31S-0.3SHW(51)
B
C
FH23-33S-0.3SHW(51)
586-1304-8-51
33
09.0 09.6 10.2
G
04.2 04.8 05.4
FH23-39S-0.3SHW(51)
586-1306-3-51
39
10.8 11.4 12.0
05.4 06.0 06.6
FH23-45S-0.3SHW(51)
586-1318-2-51
45
12.6 13.2 13.8
23
06.0 06.6 07.2
FH23-51S-0.3SHW(51)
586-1312-6-51
51
14.4 15.0 15.6
586-1322-0-51
25
06.6 07.2 07.8
FH23-61S-0.3SHW(51)
586-1310-0-51
61
17.4 18.0 18.6
586-1308-9-51
27
07.2 07.8 08.4
FH23-71S-0.3SHW(51)
586-1320-4-51
71
20.4 21.0 21.6
586-1302-2-51
31
08.4 09.0 09.6
BRecommended Land and Metal Mask Dimensions (Leadless Type)
2.9±0.05
0.25±0.05(Metal mask)
( 0.1 )
0.3±0.05(Land)
0.6±0.05
(4.6)
0.3±0.05
1.25±0.05
(4.8)
0.65±0.05
B±0.05
0.3±0.05(Land)
0.6±0.05
(0.1)
Recommended metal mask thickness: t = 0.1 mm
0.25±0.05(Metal mask)
C±0.05
Leadless Type
Part Number
Unit: mm
CL No.
Number of Contacts
B
C
G
Part Number
CL No.
Number of Contacts
B
C
G
FH23-15S-0.3SHAW(51) 586-1316-7-51
15
03.6 04.2 04.8
FH23-33S-0.3SHAW(51) 586-1305-0-51
33
09.0 09.6 10.2
FH23-17S-0.3SHAW(51) 586-1301-0-51
17
04.2 04.8 05.4
FH23-39S-0.3SHAW(51) 586-1307-6-51
39
10.8 11.4 12.0
FH23-21S-0.3SHAW(51) 586-1315-4-51
21
05.4 06.0 06.6
FH23-45S-0.3SHAW(51) 586-1319-5-51
45
12.6 13.2 13.8
FH23-23S-0.3SHAW(51) 586-1325-8-51
23
06.0 06.6 07.2
FH23-51S-0.3SHAW(51) 586-1313-9-51
51
14.4 15.0 15.6
FH23-25S-0.3SHAW(51) 586-1323-2-51
25
06.6 07.2 07.8
FH23-61S-0.3SHAW(51) 586-1311-3-51
61
17.4 18.0 18.6
FH23-27S-0.3SHAW(51) 586-1309-1-51
27
07.2 07.8 08.4
FH23-71S-0.3SHAW(51) 586-1321-7-51
71
20.4 21.0 21.6
FH23-31S-0.3SHAW(51) 586-1303-5-51
31
08.4 09.0 09.6
5
BRecommended FPC Dimensions
G±0.05
C±0.03
0.3±0.07
4
0.3
( 0.1 )
0.2±0.03
(0.07)
(2)
1.1 ±0.15
0.3 ±0.15
( 0.2 )
0.4
+0.04
-0.03
(0.5)
2.8 ±0.15
3.5 ±0.3
(Area with removed covering layer film)
1.3 ±0.15
0.6 ±0.02
+0.04
-0.03
2R0
.2
0.3 ±0.07
(0.2)
(0.05)
(0.1 between conductors)
(0.2 conductor width)
0.6±0.02
0.3±0.02
B±0.03
+0.04
- 0.03
0.6±0.07
4
0.3
5
Polyamide and thermally hardening adhesive is recommended as the materials for the stiffener.
also permitted when drawing plated leads.
BPackaging Specification
●Embossed Carrier Tape Dimensions(Tape width of 24 mm max.)
2±0.15
1.75±0.1
12±0.1
(1.7)
(0.3)
(5.1)
(0.5)
H±0.3
(L)
(N)
(0.85)
(M)
K±0.1
Ø1
.5
+
0
0 .1
4±0.1
Flat surface for placement
with Automatic equipment
(2.45)
Unreeling direction
Unit: mm
Part Number
6
CL No. Number of Contacts
H
K
L
M
N
Q
Part Number
CL No. Number of Contacts
H
K
L
M
N
Q
FH23-15S-0.3SHW(51) 586-1317-0-51
15
16
07.5 07.3 05.1 04.5 16.5
FH23-31S-0.3SHW(51) 586-1302-2-51
31
24
11.5 12.1 09.9 09.3 24.5
FH23-15S-0.3SHAW(51) 586-1316-7-51
15
16
07.5 07.3 05.1 04.5 16.5
FH23-31S-0.3SHAW(51) 586-1303-5-51
31
24
11.5 12.1 09.9 09.3 24.5
FH23-17S-0.3SHW(51) 586-1300-7-51
17
16
07.5 07.9 05.7 05.1 16.5
FH23-33S-0.3SHW(51) 586-1304-8-51
33
24
11.5 12.7 10.5 09.9 24.5
FH23-17S-0.3SHAW(51) 586-1301-0-51
17
16
07.5 07.9 05.7 05.1 16.5
FH23-33S-0.3SHAW(51) 586-1305-0-51
33
24
11.5 12.7 10.5 09.9 24.5
FH23-21S-0.3SHW(51) 586-1314-1-51
21
16
07.5 09.1 06.9 06.3 16.5
FH23-39S-0.3SHW(51) 586-1306-3-51
39
24
11.5 14.5 12.3 11.7 24.5
FH23-21S-0.3SHAW(51) 586-1315-4-51
21
16
07.5 09.1 06.9 06.3 16.5
FH23-39S-0.3SHAW(51) 586-1307-6-51
39
24
11.5 14.5 12.3 11.7 24.5
FH23-23S-0.3SHW(51) 586-1324-5-51
23
24
11.5 09.7 07.5 06.9 24.5
FH23-45S-0.3SHW(51) 586-1318-2-51
45
24
11.5 16.3 14.1 13.5 24.5
FH23-23S-0.3SHAW(51) 586-1325-8-51
23
24
11.5 09.7 07.5 06.9 24.5
FH23-45S-0.3SHAW(51) 586-1319-5-51
45
24
11.5 16.3 14.1 13.5 24.5
FH23-25S-0.3SHW(51) 586-1322-0-51
25
24
11.5 10.3 08.1 07.5 24.5
FH23-51S-0.3SHW(51) 586-1312-6-51
51
24
11.5 18.1 15.9 15.3 24.5
FH23-25S-0.3SHAW(51) 586-1323-2-51
25
24
11.5 10.3 08.1 07.5 24.5
FH23-51S-0.3SHAW(51) 586-1313-9-51
51
24
11.5 18.1 15.9 15.3 24.5
FH23-27S-0.3SHW(51) 586-1308-9-51
27
24
11.5 10.9 08.7 08.1 24.5
FH23-27S-0.3SHAW(51) 586-1309-1-51
27
24
11.5 10.9 08.7 08.1 24.5
●Embossed Carrier Tape Dimensions(Tape width of 32 mm min.)
12±0.1
(1.7)
1.75±0.1
2±0.15
(0.3)
1.7 +0.15
0
1.5 +0.1
0
(0.85)
Unreeling direction
(5.1)
(0.5)
H±0.3
J±0.1
(L)
(M)
(N)
K±0.1
Ø1.
5
+0
0 .1
4±0.1
Flat surface for placement
with Automatic equipment
(2.45)
Unit: mm
Part Number
CL No.
FH23-61S-0.3SHW(51)
586-1310-0-51
FH23-61S-0.3SHAW(51)
586-1311-3-51
FH23-71S-0.3SHW(51)
586-1320-4-51
FH23-71S-0.3SHAW(51)
586-1321-7-51
Number of Contacts
H
J
K
L
M
N
Q
61
32
28.4
14.2
21.1
18.9
18.3
32.5
71
44
40.4
20.2
24.1
21.9
21.3
44.5
●Reel Dimensions
(Q)
End portion
Blank portion
(10 pockets min.)
Mounting portion
Embossed carrier tape
(Ø80)
(Ø380)
(Ø1
3)
(2)
Lead portion (400 mm min.)
Blank portion
Top cover tape
(10 pockets min.)
7
BRecommended Temperature Profile
●Using Typical Solder Paste
5 sec. Max.
250
Temperature
240ç
200
200ç
160ç
150
150ç
(ç)
100
50
25ç(60 sec.)
60 sec. to 90 sec.
(30 sec.) (20 sec.
to 30 sec.)
0
Start
60
Soldering
Preheating 120
Time (Seconds)
HRS test conditions
Solder method
:Reflow, IR/hot air
(Nihon Den-netsu Co., Ltd.’s
Part Number: SENSBY NR-2)
Environment
:Room air
Solder composition
:Paste, 63%Sn/37%Pb
(Senju Metal Industry, Co., Ltd.’s
Part Number: OZ63-201C-50-9)
Test board
:Glass epoxy 45mm∞100mm∞1.6mm thick
Land dimensions
:Lead type 0.3mm∞1.25mm,
0.3mm∞0.7mm
Leadless type 0.3mm∞1.25mm,
0.3mm∞0.65mm
Metal mask
:Lead type
0.25mm∞1.25mm∞0.1mm thick
0.25mm∞0.7mm∞0.1mm thick
Leadless type
0.25mm∞1.25mm∞0.1mm thick
0.25mm∞0.65mm∞0.1mm thick
This temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
●Using Lead-free Solder paste
Max. 250ç
250
Temperature
230ç
200
200ç
150
HRS test condition
Solder method
Environment
Solder composition
150ç
Test board
Land dimensions
(ç)
100
50
Metal mask
25ç (60 sec.)
90 sec. to 120 sec.
(60 sec.)
0
Start
60 Preheating 120
Time (Seconds)
Soldering
:Reflow, IR/hot air
(Nihon Den-netsu Co., Ltd.’s
Part Number: SENSBY NR-2)
:Room air
:Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.’s
Part Number: M705-221CM5-42-10.5)
:Glass epoxy 45mm∞100mm∞1.6mm thick
: Lead type 0.3mm∞1.25mm,
0.3mm∞0.7mm
Leadless type 0.3mm∞1.25mm,
0.3mm∞0.65mm
: Lead type
0.25mm∞1.25mm∞0.1mm thick
0.25mm∞0.7mm∞0.1mm thick
Leadless type
0.25mm∞1.25mm∞0.1mm thick
0.25mm∞0.65mm∞0.1mm thick
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult tour solder paste and equipment
manufacturer for specific recommendations.
8
BFH23 Series FPC Construction (Recommended Specifications)
1. Using Single-sided FPC
Material
Material Name
Covering film layer.
Polyamide
Thickness (µm)
25
1 mil thick.
Cover adhesive
25
Surface treatment
Tin-lead plating
Copper foil
Cu
1oz
Polyamide
1 mil thick
25
Reinforcement material adhesive Heat-hardened adhesive
30
5
35
Base adhesive
Base film
Stiffener
25
Polyamide
75
3 mil thick
195
Total
2. Using Double-sided FPC
Material
Material Name
Covering layer film
Polyamide
Thickness (µm)
1 mil thick
Cover adhesive
25
Surface treatment
Tin-lead plating
Through-hole copper
Cu
Copper foil
Cu
5
15
1/2oz
Base adhesive
Base film
25
18
18
Polyamide
1 mil thick
Cu
1/2oz
Polyamide
1 mil thick
25
Reinforcement material adhesive Heat-hardened adhesive
25
Stiffener
25
Base adhesive
Copper foil
18
Cover adhesive
Covering layer film
25
18
25
Polyamide
1 mil thick
Total
199
3. Precautions
Note : Recommended specification for FPC 0.2±0.03 mm thick.
FPC/FFC Manufactures' Contact List
Sumitomo Bakelite Co., Ltd. Flexible Printed Circuit Board Division
5-8, Higashi-shinagawa 2-chome, Shinagawa-ku, Tokyo, Japan
TEL:+81 3 5462 4191
FAX:+81 3 5462 4882
Fujikura Ltd. Electronics Global Marketing Department
1-5-1, Kiba, Koto-ku, Tokyo, Japan
TEL:+81 3 5606 1165
FAX:+81 3 5606 1530
NOK Corporation Sales Division Overseas Business Department
1-12-15, Shiba-Daimon, Minato-ku, Tokyo, Japan
TEL:+81 3 3432 6976/8415
FAX:+81 3 3432 3919
9
BConnector Operating Instructions, precautions and recommendations
Operation
Precautions
1.FPC Termination procedure. Connector
installed on the board.
1) Do not apply excessive force or use any type of
tool to operate the actuator.
1) Lift up the actuator. Use thumb or index finger.
2) Rotate down the actuator until firmly closed.
NOTE: The FPC must be fully inserted in the connector. If not fully inserted, the actuator will not
close properly. Should this be the case, lift up the
actuator (per Step 2 below) and repeat the process
(starting with Step 1 above)
2) The connector will assure reliable performance
when the actuator is open to 90° maximum (see
fig.1) Do not exceed this angle, as this may cause
permanent damage to the connector.
90ç
3) For connectors with multiple contacts, such as 39
and 61 pos. rotate down the actuator pushing at
both ends.
3) Assure that the FPC is fully inserted parallel to
mounting surface, with the exposed conductive
traces facing down.
2.FPC Removal
1) Lift up the actuator.
2) Carefully remove the FPC.
FPC conductor surface
10