SIM Card Sockets ID1A Series Miniature and Thin 17 .4 Plecement surface 30. 6 2.45 Photograph (1) ■Features Slide Lock System 1. Suited for Plug-in SIM Cards of the GSM Standard (11.11) In Europe, SIM card Subscriber Identity Modules are used for subscriber identification with portable telephone terminals of the GSM system for which standards have been unified. The ID1A Series of sockets are suited for use with GSM standard (11.11) plug-in SIM cards. LOCK OPEN Can be locked by moving the slider. 2. Miniature and Thin These sockets are miniature and thin with a height of 2.45 mm, length of 30.6 mm, and width of 17.4 mm. The weight has been reduced by 30% compared with our existing products. (See Photograph (1).) 3. Suited to Automatic Mounting The board mounting method is of the surface mount type.In addition to the standard tray packaging specification, an embossed tape specification suited to automatic mounting is also available. Upside down insertion of the SIM card is prevented through the establishment of a polarity. Photograph (2) Structure and Names of the Parts 4. Prevention of Incorrect Insertion to the Board Slider A board-positioning boss prevents incorrect insertion to the board by means of boss position and boss diameter. Card holder 5. Slide Lock System An original lock structure securely holds the SIM card and easy opening and closing of the card holder is another feature. (See Photograph (2).) Housing ■Applications Portable terminals and equipment that use GSM Standard (11.11) plug-in SIM cards. Contacts Photograph (3) C39 ■Product Specifications Current rating 1 A Rating Voltage rating 100 V AC Item Storage temperature -10ç to +60ç (NOTE 2) Storage humidity 40 to 70% (NOTE 2) Operating temperature -30ç to +80ç (NOTE 1) Operating humidity range 40 to 80% 1. Insulation resistance Specification 1000M ohms min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown. 500 V AC / 1 minute 3. Contact resistance 40 m ohms max. 100 mA 4. Vibration No electrical discontinuity of 10 µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Contact resistance 60 m ohms max. Insulation resistance 100 M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature cycle Contact resistance 60 m ohms max. Insulation resistance 100 M ohms min. Temperature: -55ç: 30 min. --> 15 to 35ç: 5 min. MAX --> 85ç: 30 min --> 15 to 35ç: 5 min. MAX) for 5 cycles 7. Durability (Insertion/withdrawal) Contact resistance of 60 m ohms max. 5000 cycles 8. Resistance to Soldering heat Conditions No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. ■Materials Part Material Insulator Synthetic resin Contacts Phosphor bronze Card holder Synthetic resin Slider Synthetic resin Finish Remarks Color : Black Contact portion: Gold plating Lead portion: Solder plating UL94V-0 Color : Black Color : Beige UL94V-0 UL94V-0 ●Ordering Information ID1A - 6 S - 2.54 SF (21) 1 2 3 4 1 Series Name: ID1A 2 Number of contacts: 6 3 Contact type S: Socket 4 Contact pitch: 2.54 mm 5 Terminal type SF: SMT type 6 Packaging type Blank: Tray packaging (21): Embossed tape packaging C40 ______ 5 6 ■Sockets 29.2±0.3 No.3 OPEN No.7 No.5 LOCK 2.54±0.2 1.36±0.2 Contact No.1 (10) (12) 17.4±0.3 C L 1 Protruding portion 1 2.45±0.3 17.4±0.3 2.54±0.2 1.18±0.2 (1.39) Amount of sliding(1.5) OPEN LOCK (0.65) C L 12±0.1 (2.1) 5) 1. (Ø 0.25t±0.05 ∞0.5w±0.05 (4.82) With the card holder closed C L 1) (Ø (9.09) 15.8±0.1 (21.5) (5.7) SIM CARD (GSM 11.11) 1 Protruding portion With the card holder open (23.15) 0°~180° (2.9) 3 7.62±0.2 C L (1.1) 1 2 3 (23.02) 27.2±0.2 (1.1) When locking, slide the protruding portion of the slider after the card holder has been closed. The co-planarity at the SMT lead tip portion is 0.1 maximum. C L indicates a 7.62 ±0.2 center line. Part Number CL No. Number of Contacts Packaging type ID1A-6S-2.54SF 645-0003-9 6 Tray ID1A-6S-2.54SF(21) 645-0003-9-21 6 Embossed tape (NOTE 1) Number of Pieces ______ 500 pieces per reel NOTE 1: Embossed tape packaged items are sold by the reel with 500 pieces per reel. C41 BPCB mounting pattern 1.5 Min. 15.4±0.1 11.5±0.1 1.3 Min. 4.3±0.1 1.5 Min. 1.3 Min. 1.1±0.1 2.45±0.05 Ø1.1 + 0.1 0 Pattern prohibited area 1 2.1±0.05 1.1 Min. 12±0.05 5.08±0.05 0.4±0.1 Ø1 .6 +0 0 .1 15.8±0.05 19.7±0.05 Connector mounting position 1 3.9±0.05 6.4 Min. 22.2 Min. Shaded portions [///] indicate pattern prohibited areas. BTemperature Profile 5 s max. 250 240ç 200 Temperature(ç) 200ç 160ç 150 150ç Applicable Conditions Reflow system: IR reflow Solder type: Cream type 63 Sn/37 Pb (Flux component 9 wt%) Test board: Glass epoxy 85 x 60 x 1 mm Metal mask thickness: 0.15 mm 100 50 25ç(60 s) 0 Start (30 s) 60 to 90 s Preheating time 60 120 Time (Seconds) C42 (20 to 30 s) Soldering time Conditions may change and are dependent on type and thicness of solder. ■Embossed Carrier Tape Dimensions 1.75±0.1 2±0.15 .1 +0 0 24±0.1 + .5 Ø1 (2.8) (0.9) 44±0.3 1.7 +0.15 +0 40.4±0.1 20.2±0.1 4±0.1 1.5 +0.1 +0 Unreeling direction Dimensions (44.5) 3± 0. 5 (2) (Ø80) (Ø330) Ø1 ●Reel C43 ■Method of Using the Sockets 1. Part Structure and Names Please see Photograph (3) on C39 page. 2. Opening the Holder Cover Press the slider and at the same time move it in the direction marked "OPEN". This action will release the lock and free the card holder. Remove the SIM card (as shown) so that it comes out from the card holder. 3. Closing the Holder Cover Align the slit of the SIM card with the polarity position. Polarity Insert the SIM card to the card holder. C44 Close the card holder, press the slider, and at the same time move it in the direction marked "LOCK" on the card holder. A click sound will indicate that the lock has been engaged. BPrecautions for Use 1) When opening the card holder with a SIM card inserted, avoid the action of directly lifting the SIM card and releasing the lock. Doing so will cause damage to the lock structure. 2) The card holder is based on a structure that moves only in the turning direction. Avoid pulling or applying unreasonable force in other directions. 3) Do not close the card holder when the slider is protruding from the card holder. Doing so will cause damage to the lock structure. (Please refer to the photographs below.) 4) A lock that is not fully engaged will cause poor contact. 5) Do not perform hot-line insertions. (NOTE 1) NOTE 1: The term hot-line insertion means performing an insertion while the electricity is supplied. Yes No The slider is protruding from the card holder. BWashing Conditions 1) Organic Solvent Washing Solvent IPA (Isopropyl alcohol) HCFC (Hydrochlorofluorocarbon) Normal temperature washing Heated washing Yes Yes Yes Yes 2) Water Type Washing When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins. 3) Washing Precautions Residual flux or cleaning agent on the sockets when washing with organic solvents or water type cleaners can give rise to the deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed. C45